Cabinets and Junction Boxes

Armários Compactos / Caixas Plásticas KS - Rittal

Armários Compactos CM - Rittal

Assembly frame – Assemblex – Rittal

Despite the high level of automation in the switchgear manufacturing process, there are still some situations which call for manual machining. The ergonomically coordinated assembly frames plus storage and transport trolleys help to create optimised working conditions.

The new assembly frames from Rittal, Assemblex, are a revolutionary tool in the switchgear manufacturing process. The health problems associated with posture and comfort issues in the workplace will be part of the past.
 
The assembly frames of Rittal are available in 3 different configurations with respect horizontal and vertical adjustment, working height and supported load.

Baying systems TS8 - Rittal

TS 8, the Top enclosure system, a system platform for individual tasks. 
Every enclosure, with all-round accessibility, is a specialist - however particular the task in hand. 

Bus enclosures BG - Rittal

Small enclosures.
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes. 

With: Fibreglass-reinforced polycarbonate;  Cast aluminium;  Sheet steel with high-quality coating;  Stainless steel. Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.  

Cast aluminium enclosures GA - Rittal

Small enclosures. This is application-oriented diversity:  6 enclosure types in 4 materials and more than 100 sizes. 

With: Fibreglass-reinforced polycarbonate: Cast aluminium;  Sheet steel with high-quality coating;  Stainless steel.
Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.  
 

Climate control machine Peltier EPAC – Europeltier

Thermal control with light and robust machines that do not use refrigerant gases. They are efficient for cooling electrical panels and control panels, among others.
 
Europeltier thermal control machines are light and robust (IP67) and do not use refrigerant gases. They support extreme environments such as air with dust or salt spray, movements, vibrations and inclinations, ambient temperature between -40ᵒ and + 90ᵒ C, sun, snow or rain. The same equipment can cool or heat and are available in AC and 24V DC currents.

 

Climate control machine Peltier EPDC – Europeltier

Thermal control with light and robust machines that do not use refrigerant gases. They are efficient for cooling electrical panels and control panels, among others.
 
Europeltier thermal control machines are light and robust (IP67) and do not use refrigerant gases. They support extreme environments such as air with dust or salt spray, movements, vibrations and inclinations, ambient temperature between -40ᵒ and + 90ᵒ C, sun, snow or rain. The same equipment can cool or heat and are available in AC and 24V DC currents.

 

Control panel and HMI enclosure systems - Teknokol

Industrial computers and operator control panels with HMIs are very important tools for machines and production lines. Teknokol control panels, built in aluminium, are modular and have an ergonomic design.
 
Teknokol offers two distinct enclosure series: the ECO line and TKP2000 line. The ECO line is based on profiles with depths of 60 (ECO060), 90 (ECO090), 120 (ECO120) and 150 (ECO150) millimetres.

Cooling Systems - Climate controlled doors – Rittal

Rittal system climate control for doors offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process control, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions with Rittal, everything is interconnected. 

Cooling Systems - Fan-and-filter units– Rittal

Rittal fan-and-filter units are ideal for dissipating high heat loads cost-effectively. 
The pre-requisite is that the ambient air must be relatively clean with a temperature below the desired enclosure internal temperature. The entire range of fan-and-filter units is now also available with EMC shielding and all required rated voltages.

Cooling Systems - TopTherm-Plus roofmounted cooling units– Rittal

The TopTherm-Plus roofmounted cooling units from Rittal has a flexible performance, only 3 mounting cutouts for 6 different output categories in 28 design variants. 
Climate controlled doors.
Targeted air routing in the enclosure. 
The internal air circulation is targeted and effective: The heated air is extracted centrally. Air exhaust occurs in the four corners, depending on requirements.

 

Cooling Systems - TopTherm-Plus wall mounted cooling units– Rittal

The Rittal wall-mounted cooling units are practical and stylish.
The mounting cutout is selected depending on the mounting variant:
external, internal or partial internal mounting. This makes optimum use of the space available. 

Fan-and-filter units with EC technology – Rittal

Rittal presents the energy-efficient version of the RTT fan-and-filter units with EC technology. From 180 m³/h with integral control interface to regulate and monitor the fan (0-10 V / PWM input and signal output).
Simplify your assembly work and save valuable time by eliminating the use for tools for key tasks: mounting on the enclosure, reversal of the air flow direction, electrical connection and fast filter mat replacement.
The pressure stability of the diagonal fans promises greater energy efficiency and a more constant air throughput – that is even more effective in helping to prevent hot spots.
 

Luminárias LED – Rittal

The new LED system light is ideal for meeting the new EU requirements.

It is also the first generation of lights developed especially for enclosures, featuring state-of-the-art LED technology.
 
The new LED system light sets brand new standards in all areas with innovative LED technology for even more light into the very last corner. Intelligent lighting, tailored to the geometry of the enclosure, thanks to a special optical cover with Fresnel structure.
 

Modular enclosure VX25 – Rittal

After a success story with more than 10 million TS8 units produced and after five years of development work, Rittal unveils its new VX25 large enclosure system. The development culminated in the new VX25 large enclosure system. VX25 stands for the versatility of options, the fulfilment of x customer requirements and for perfect symmetry through a consistent 25-mm pitch pattern.
 
Customer benefit along the entire value chain of control and switchgear manufacturing can be summarised in three key points: maximum data quality and a constant supply of data, reduced complexity and savings in time, as well as safe assembly.
 

Polycarbonate enclosures PK - Rittal

Small enclosures. 
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.

Small and compact enclosures AX/KX - Rittal

In 1961, Rittal was the first company in the world to series-produce enclosures. It all started with the compact enclosure AE, the predecessor of the current AX series. The new compact enclosures AX and small enclosures KX continue on seamlessly from this. The interior installation is largely compatible, which creates completely new engineering and installation synergies.
 

Small enclosures – E-Box EB – Rittal

For a wide variety of applications, Rittal has created the E-Box EB small enclosure.
This type of wall mounted enclosure already includes the door and mounting plate. Is 180 degrees hinge gives a perfect access to the interior. With depths from 80mm to 155m, widths of 150mm to 300m and heights of 150mm to 800m, the E-Box EB is the ideal solution for small wall mounted applications.

Support arm systems TK045/TK060/TK120 - Teknokol

Industrial computers and operator control panels with HMIs are very important tools for machines and production lines. Together with control panels, Teknokol suspension support arms systems provide cost efficient, quick lead time, modular assembly and customizable solutions. Teknokol Support arms are designed for loads up to 120kg.
 
Teknokol offers a diverse selection of components to build support arm systems, always using a modular and easy to customize concept.

Support arm systems – CP 40/60/120/180 – Rittal

From different lines of sight to the machine to smaller or taller operators working from a seated or standing position – with the support arm systems from Rittal, the interaction between observing and controlling has never been better.
 
The Rittal support arm systems are available in 4 cross-sections for different load capacities. With a sleek and functional design, they offer a high degree of stability for all load levels up to 180Kg. The many modular components allow different possibilities for the configuration of the support arm system and the design of solutions adapted to each need.
 

Terminal boxes KL - Rittal

Small enclosures.
This is application-oriented diversity:  6 enclosure types in 4 materials and more than 100 sizes. 

With: Fibreglass-reinforced polycarbonate;  Cast aluminium;  Sheet steel with high-quality coating;  Stainless steel.
Every aspect of your requirements is met. It goes without saying that all this is achieved in
Rittal's familiar high quality, and to suit every security requirement. 
  • 0
  • 1