Industrial Automation

Multichannel process controller / Program controller IMAGO 500 - Jumo

The Jumo IMAGO 500 is a process controller and programmer with up to 8 control channels or 4 programming channels.
The IMAGO 500 is built for the 144x130mm format for a standard panel cut of 92x92mm and a mounting depth of 170mm.
The 5-inch touch-screen display has 27 colors. The layout of the display models can be adjusted individually. Two freely configurable display models allow to be customized for text placement, process values, background images and icons.

The controller has up to 8 analog inputs and 6 logic inputs as well as 6 expansion slots for analogue or switched outputs. Four of these slots can be used alternately for analog inputs or outputs.
more details
Request Offer
An installation program is available to conveniently configure the IMAGO 500 from a PC. Linearization for the usual transducers is stored within the controller, 4 user-specific linearization tables can be programmed. A mathematical and logical module can be used to adapt the instrument to a wide range of control tasks.
Two serial interfaces, RS422 / 485 or PROFIBUS-DP, serve to integrate the controller into a data network. The modules can be adapted quite simply by the user.
The electrical connection is made at the back of the instrument, through plug-in screw terminals.
  • Brilliant 5" TFT screen with 27 colors;
  • Freely configurable screen templates;
  • Up to 8 controller channels;
  • 50 programs, with 1000 segments under dynamic management;
  • 16 limit comparators;
  • Modular hardware design;
  • Recording function;
  • Up to 4 cascade controllers;
  • PROFIBUS-DP interface;
  • Math and logic functions;
  • Teleservice via external modem;
  • Setup program and program editor for Windows® 2000, XP, Vista, 7 (32-bit and 64-bit).
  • Control of temperatures, pressures and other process variables according to set point value profiles.

F.Fonseca is the representative of Jumo in Portugal.
  • 0
  • 1