Home
Online store
Probe configurator
Contacts

Process, Instrumentation & Environment?

Ultrasonic flow meters FLOMIC FL5034 - Elis Plzen

The battery-powered FLOMIC FL5034 ultrasonic flow meters are intended for operational and invoicing measurements of instantaneous flow rate, pressure and consumption in water piping, in observance of standard EN 14154, in water works, water distribution systems and other industrial applications.

The features of the FLOMIC flow meters make them suitable for water-leak detection and tracking and monitoring of the general condition of water-supply networks.

 
more details
Request proposal
Ultrasonic flow meter FL 50X4 design
 
These flow meters have a compact design with IP 68 protection class. They are characterized by high measurement accuracy and long-term stability over a wide range of measured values. The meters don’t need any external power supply, don’t include any moving parts and have significantly lower hydraulic losses.
 
The measurement method used by these meters is a single-beam transit-time pulse method based on evaluation of the time needed for an ultrasonic signal to cross the distance between two measuring transducers. In the standard version, the meter measures instantaneous flow rate (in m3/hour) and the total volume of water passed through the meter (in m3) in the given flow direction.
 
The measured data are converted into passive pulse output signals. The meter output signals can be connected via data transfer systems to remote computer control stations. Flow Meter electronics also includes data storage with several connection possibilities (GSM module, RS232, optical data probe). This feature can be useful for distant measuring points without electricity.
 
Flow meters FLOMIC FL 50X4 can effectively save customers’ costs everywhere, especially where there’s the need to measure water and it’s not possible or it’s expensive to connect to the energy power grid.
 
Technical parameters
  • Usage measurement of total volume of water passed through and instantaneous flow rate and pressure;
  • The principle of the measurement is transit-time;
  • Type - one beam (1B);
  • Compact or remote version;
  • Range of dimensions DN32 to DN300;
  • Temperature of measured fluid up to 50°C;
  • Pressure up to 4.0 MPa;
  • Flow sampling period 1 sec;
  • Electrical outputs: pulse and current;
  • Interfaces: optical probe, RS232, GSM;
  • Data storage data archive;
  • Power source: li battery 3.6V, 16Ah and lifetime of 6 to 8 years;
  • Protection class IP 68.
 
Features
  • High measurement accuracy;
  • Long-term measurement stability over a wide range of measured values;
  • High operational reliability and practically no maintenance requirements;
  • Extra-low hydraulic losses;
  • Optional long-distance transfer of measured data;
  • MID approval.
 
Advantages
  • Low maintenance;
  • Long lifetime;
  • Ideal for remote locations and network monitor;
  • Custody transfer applications.
 
Industries 
  • Operational and invoicing measurements of instantaneous flowrate, pressure and consumption in water piping in observance of standard EN14154 in water works, water distribution systems and other industrial applications.

F.Fonseca is the representative of Elis in Portugal.
  • 0
  • 1
We use our own and third-party cookies to offer you a better experience and service. To know which cookies we use and how to disable them, read the cookies policy.
By ignoring or closing this message, and unless you have disabled cookies, you agree to its use on this device.