PrintSuggestShareMore info

Building Technologies

Motion detector Light Sensor Dual - Steinel

The duality of light measurement.
Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version.
 
more details
Downloads
Request Offer
No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.

Features

Surface-mounted installation

Light sensor dual KNX, square 011727
Light sensor dual KNX, round 033644
Light sensor dual KNX, round 009762


Concealed installation
Light sensor dual KNX, square 033637​​​​​​​
Light sensor dual KNX, round 033651​​​​​​​
Sensor type photo-cell controller​​​​​​​
Dimensions (H x W x D) 42 x 95 x 95 mm​​​​​​​
Installation indoors/ ceiling​​​​​​​
Recommended installation height 4.00 m​​​​​​​
Angle of coverage directed and diffuse​​​​​​​
Twilight setting 2 – 1000 lx​​​​​​​
IP rating IP54

Advantages 
  • 5 years warranty;
  • Standard KNX protocol via ETS software;
  • Programming also via remote control or via Smart Remote.
 
Applications 
  • Corridors and passageways;
  • Entrance halls;
  • Side and equipment rooms;
  • Multi-storey car parks;
  • High-bay warehouse spaces;
  • Bathrooms as washrooms;
  • Stairways.

F.Fonseca is the representative of Steinel in Portugal.
  • 0
  • 1