Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument.

The BM25 packs the benefits of a fixed system area monitor into a rugged, user-friendly and transportable instrument. It was designed to detect one to five gases for mobile or temporary work applications, team protection, area surveillance or places where fixed detection systems are not suitable.

Powered by a NiMH battery pack, the BM 25 multi gas monitor offers up to 170 hours of continuous run time. Other standard features include STEL and TWA values, as well as a data logging capacity of more than four months. Multiple units can be grouped using optional alarm transfer kits. This protects larger areas by transferring alarms from one BM 25 to the next. An intrinsically safe trickle charger is also available for long-term area monitoring in classified zones.

Industrial Scientific’s iNet™ Control is a Customer User Interface (CUI) tool that provides insight into your gas monitoring program and allows users to configure and continuously manage their gas detection program from any mobile browser or web-enabled PC.
 
The iNet™ Control Dashboard is a web-based application that compiles data received during Docking Station™ and instrument transactions to ultimately help you safely manage your business.
 

The Ventis Slide-on Pump is ideally suited for operators that wear their gas monitor primarily for personal protection but occasionally require a pump for confined space entries. It is compatible with the Ventis Pro, Ventis MX4 and MX4 iQuad multi-gas monitors.

Easy User and Site Tracking
iAssign™ Technology tracks users and sites in real time helping you to identify and address hazards.
 
Gas detectors record basic information about gas hazards, but they don’t help you understand who was exposed and where. With iAssign™ Technology, available in the Ventis™ Pro Series, tracking people and location data is a quick and easy way to enhance your gas detection program.
 

Real-time alerts for gas hazards, panic, and man-down situations.
iNet® Now live monitoring software provides real-time text and email alerts for gas hazards, panic, and man-down situations allowing you to see and respond to incidents as they happen. A map helps you to pinpoint the location of workers and instruments. With iNet Now, you can have confidence that workers are visible, even when you’re miles away.
 

The iTrans 2 infrared gas sensor employs an intelligent electronic platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans 2 offers remote diagnostics, set-up or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.

Smart Infrared Gas Sensor Technology and Safety Features
 
Able to detect any combination of gases for a specific environment, iTrans 2 utilizes our industry-proven “smart” infrared gas sensor technology and safety features including automatic sensor recognition, access code security, and zero and cal fault protection – all enclosed within an explosion-proof aluminum or stainless steel housing. The microprocessor-controlled transmitters are capable of independent operation or multi-point system configuration. The infrared sensor provides explosive gas detection (methane, butane, propane, ethylene, hexane, etc.) in more severe environmental conditions, where the presence of poisons could harm the use of a catalytic cell. In addition to the LEL sensor range, the iTrans 2 detector can also be configured with a 0-100% volume methane infrared sensor for bio-gas applications and CO2 infrared sensors ranging from 0.5% volume to 100% volume.

Designed for commercial applications, OLCT 10 detectors perfectly suit the protection of equipment and personnel in presence of combustion and exhaust gases or refrigerants (freons) in ambient air.

Rugged, small, easy to install and operate, these detectors combined with the MX 15 controler unit meet demanding user requirements.
 
The OLC(T) 10 is a low cost, easy to install and use gas detector for non-hazardous rated areas. It can communicate via 4-20 mA or RS485 digital communications.
 

Designed for commercial applications, OLCT 10 detectors perfectly suit the protection of equipment and personnel in presence of combustion and exhaust gases or refrigerants (freons) in ambient air.
Rugged, small, easy to install and operate, these detectors combined with the MX 15 controler unit meet demanding user requirements.
 
The OLC(T) 10 is a low cost, easy to install and use gas detector for non-hazardous rated areas. It can communicate via 4-20 mA or RS485 digital communications.
4-20 mA output analog transmitter without display – available with catalytic bead, electrochemical or semi-conductor sensors – detects combustible, toxic and refrigerant gases (CO, NO, NO2, Methane, Propane, Butane, Hydrogen, LPG, NGV and freons). It’s EN 14624 compliant with regards to R134a monitoring and adequate for commercial use (boiler rooms, hospitals, carparks, etc.). The OLC(T) family is ATEX 3G certified for use in zone 2 (except semi-conductor version).
 

Designed for the detection of explosive gases, toxic gases or oxygen, this combustible gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application, TELEDYNE - Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor or poison control version.

ATEX approved, these detectors are available in explosion safe or intrinsically safe versions. In addition to this range, the OLC/OLCT 100 offers an infrared sensor, which allows it to be used in more severe environmental conditions, where the presence of poisons could harm the use of a catalytic sensor. With a 3-year warranty on the sensor and electronics, the OLCT 100 XP-IR will provide reliability and extended lifetime. With this new line of detectors, Oldham broadens its product range with products that combine reliability, durability and ease of use.

GasBadge Pro, Dockable single gas monitor.
Built to Industrial Scientific’s highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. 
Interchangeable “smart” sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen.

GasBadge Pro communicates directly via an infrared interface to optional accessories like the Docking Station™, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading.  Standard STEL and TWA readings and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.
 

Tecnology DualSense: Why two are safer than one?

By wearing the Tango™ TX1, your workers will be the safest single gas monitor users in the world. A 3-year runtime and patent pending DualSense™ Technology increases worker safety, regardless of bump test frequency, while reducing overall costs.

Significantly increases worker safety – DualSense Technology ensures that regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today.*

Longer battery life – Operates continuously in an “always-on” mode for three years. After the battery can no longer support instrument life, it can be replaced for another three years of continuous operation.
 

Gas warning and gas measuring instrument for detecting toxic gases.

The ideal measuring device for gas and water suppliers, fire brigades, sewage plants, landfills, biogas plants and the chemical industry.

The EX-TEC GM 4 is the perfect partner for both leak detection in pipelines and monitoring the atmospheric air as well as for measuring gases to monitor chemical or biological processes.

The Ventis MX4 gas detector is configured for your safety. The Ventis MX4 takes your gas detection program to the next level.

No matter the industry, workplaces are becoming more complex. Demands for increased productivity and efficiency persist to become the focal point of operations. In order to meet such high demands, employees working in potentially hazardous environments require a high quality, reliable gas detector that above all else, keeps them safe.

When it comes to choosing equipment to protect your worksite from hazardous gases, rely on the Radius™ BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.
 
The rugged, transportable Radius BZ1 provides an industry-leading run time of 7 days (168 continuous hours) while excelling at hazard communication, connectivity, and ease of use.
 
When a gas hazard occurs, the Radius BZ1 ensures that workers in industrial environments not only know that the instrument is alarming, but why, thanks to distinctive audio and visual cues and an extra-large display. Custom alarm action messages allow workers to focus on taking appropriate action depending on the present gas level.