Proven technology meets revolutionary operation

The Combustion gas analysers Testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The Combustion gas analysers Testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.
 

Nowadays almost all industries have manometers, transducers and pressure switches that need to be checked or calibrated.
 
For this purpose we need high precision standards to compare and record deviations. These standards can be used on the ground or in the lab bench.
The 918 Pneumatic Pressure Test Pump is a manual pressure pump designed to generate pressure from 95% vacuum at 1,500psi (100bar).
 

The Robotiq 2-Finger Adaptive Gripper has two versions, 85 and 140. The 2-Finger version will change finger opening dimensions, which will be 85 mm (2F-85) or 140 mm (2F-140).
 
Both versions use the same base, installation and control will be exactly the same. The 2-Finger Gripper is a robotic peripheral that is designed for industrial applications. Its design makes it a unique robotic end-of-arm tool to quickly pick, place and handle a large range of objects of varying sizes and shapes.
 

Sick´s line of IVC smart cameras are self-contained, stand-alone vision systems with an easy-to-use graphical user interface, enabling fast development for 2D and 3D applications. They combine imaging and analysis into one camera.

These flexible, high-performance cameras provide tools for inspection, robot guidance, measuring and identification. With only one camera, you can perform any combination of advanced inspections and measurements to optimize production quality. The cameras support customized operator interfaces, and communication via I/O, serial and Ethernet. 

Three dimensional information – Simple responses.
3D Detection with direct data evaluation.

The Visionary-T DT, a 3D detection sensor, delivers high-quality data for industrial applications, processes these directly in the sensor and initiates appropriate actions where required – all without the support of a PC. Both the hardware and the software have been designed specifically for indoor use in industrial environments. The Visionary-T DT acting as a sensor can be used around the clock and, besides an IP67 enclosure rating and a reliable software interface, offers high-performance features to suit a wide variety of applications.

As a 3D detection sensor with a working distance of up to 60 m, the Visionary-T DT employs an innovative 3D snapshot technology based on time-of-flight measurement. The Visionary-T DT delivers real-time depth information for every pixel and offers a range of high-performance features.
 

Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument.

The BM25 packs the benefits of a fixed system area monitor into a rugged, user-friendly and transportable instrument. It was designed to detect one to five gases for mobile or temporary work applications, team protection, area surveillance or places where fixed detection systems are not suitable.

Powered by a NiMH battery pack, the BM 25 multi gas monitor offers up to 170 hours of continuous run time. Other standard features include STEL and TWA values, as well as a data logging capacity of more than four months. Multiple units can be grouped using optional alarm transfer kits. This protects larger areas by transferring alarms from one BM 25 to the next. An intrinsically safe trickle charger is also available for long-term area monitoring in classified zones.

The iTrans 2 infrared gas sensor employs an intelligent electronic platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans 2 offers remote diagnostics, set-up or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.

Smart Infrared Gas Sensor Technology and Safety Features
 
Able to detect any combination of gases for a specific environment, iTrans 2 utilizes our industry-proven “smart” infrared gas sensor technology and safety features including automatic sensor recognition, access code security, and zero and cal fault protection – all enclosed within an explosion-proof aluminum or stainless steel housing. The microprocessor-controlled transmitters are capable of independent operation or multi-point system configuration. The infrared sensor provides explosive gas detection (methane, butane, propane, ethylene, hexane, etc.) in more severe environmental conditions, where the presence of poisons could harm the use of a catalytic cell. In addition to the LEL sensor range, the iTrans 2 detector can also be configured with a 0-100% volume methane infrared sensor for bio-gas applications and CO2 infrared sensors ranging from 0.5% volume to 100% volume.

Designed for commercial applications, OLCT 10 detectors perfectly suit the protection of equipment and personnel in presence of combustion and exhaust gases or refrigerants (freons) in ambient air.

Rugged, small, easy to install and operate, these detectors combined with the MX 15 controler unit meet demanding user requirements.
 
The OLC(T) 10 is a low cost, easy to install and use gas detector for non-hazardous rated areas. It can communicate via 4-20 mA or RS485 digital communications.
 

Designed for commercial applications, OLCT 10 detectors perfectly suit the protection of equipment and personnel in presence of combustion and exhaust gases or refrigerants (freons) in ambient air.
Rugged, small, easy to install and operate, these detectors combined with the MX 15 controler unit meet demanding user requirements.
 
The OLC(T) 10 is a low cost, easy to install and use gas detector for non-hazardous rated areas. It can communicate via 4-20 mA or RS485 digital communications.
4-20 mA output analog transmitter without display – available with catalytic bead, electrochemical or semi-conductor sensors – detects combustible, toxic and refrigerant gases (CO, NO, NO2, Methane, Propane, Butane, Hydrogen, LPG, NGV and freons). It’s EN 14624 compliant with regards to R134a monitoring and adequate for commercial use (boiler rooms, hospitals, carparks, etc.). The OLC(T) family is ATEX 3G certified for use in zone 2 (except semi-conductor version).
 

Designed for the detection of explosive gases, toxic gases or oxygen, this combustible gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application, 3M Gas & Flame Detection offers a solution: catalytic, electrochemical, semiconductor or poison control version.

ATEX approved, these detectors are available in explosion safe or intrinsically safe versions. In addition to this range, the OLC/OLCT 100 offers an infrared sensor, which allows it to be used in more severe environmental conditions, where the presence of poisons could harm the use of a catalytic sensor. With a 3-year warranty on the sensor and electronics, the OLCT 100 XP-IR will provide reliability and extended lifetime. With this new line of detectors, Oldham broadens its product range with products that combine reliability, durability and ease of use.

Nowadays with the IoT trend is more and more common to have devices connected remotely for monitoring or service purposes.
Teltonika with 20 years of experience is a leading company from connected vehicles to networking solutions.
 
RUT240 is a compact, cost-effective and powerful industrial LTE router for professional applications. Router delivers high performance for mission-critical cellular communication. Equipped with external SIM holder and signal strength status LEDs, it ensures easy network management. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.
 

The AHS/AHM36 IO-Link absolute encoders set standards in mechanical adaptation, electrical connectivity and IO-Link communication. With their rotatable male connector or cable connection as well as the various mounting hole patterns and adapter flanges, these encoders are suitable for nearly any application.
 
The IO-Link interface enables economical encoder integration into Ethernet and fieldbus networks. The configuration of the encoder can be adjusted individually via the SOPAS engineering tool from Sick or the IO-Link master. The rugged, reliable, fully magnetic sensor system provides a maximum resolution of 12 bits for the singleturn variant and maximum 24 bits for the multiturn variant.
 

The AHS/AHM36 SSI absolute encoder product family provides increased flexibility due to its mechanical adaptation, electrical connectivity, and SSI communication. With their rotatable connector or cable outlets as well as the various mounting hole patterns and adapter flanges, these encoders are suitable for nearly any application.
 
 

With a high resolution of 18 bits (AFS60 Inox) or 30 bits (AFM60 Inox) and a large selection of programmable parameters, the AFS60 Inox absolute singleturn encoder and the AFM60 Inox absolute multiturn encoder set new standards when it comes to stainless-steel encoders.
 
The high resolution, the high IP enclosure rating, and the stainless-steel housing enable use in applications under harsh ambient conditions. The encoders are equipped with the SSI interface while the AFM60 Inox is also available with the SSI + Incremental and SSI + Sin/Cos combined interfaces. Both encoders can be programmed using the PC-based programming device PGT-08-S or the hand-held programming device PGT-10-Pro.
 

The AFS60/AFM60 EtherNet/IP absolute encoders from Sick are the first encoders of their kind to feature an active web server as well as to make their function blocks available for fieldbus integration.
 
Mechanical engineers, integrators, and end customers all benefit from features including simple commissioning, significantly reduced configuration time, and direct, continuous access to the encoder via the machine's HMI user interface. Furthermore, the encoders are equipped with an FTP server for direct firmware updates. The web server configuration option opens up entirely new opportunities for commissioning, service, and maintenance by operating personnel who have different capabilities and levels of interface knowledge.
 

High performance servo motor system. Easy to use, for all machines and environmentally friendly.
The MR-JE family uses advanced features such as one-touch auto-adjustment, vibration suppression and machine diagnostic functions. All these features are integrated into an easy-to-use servo motor solution.

The MR-JE from Mitsubishi Electric is a high-performance servo amplifier and servo motor system. Combining high reliability with a high frequency response and power saving design, these systems offer the best performance in their class with an enormous ease of installation. Fully compatible with most global standards and ready for deployment worldwide, the MR-JE series is the servo solution for all types of machines and applications.

In order to meet the needs for low voltage applications, Mean Well power supply units range includes the enclosed type DC/DC converter models with single output. The SD and RSD series.
 
With different input voltage ranges, the DC/Dc converters from Mean Well present a high reliability and are available with adjustable DC outputs of 5, 12, 24 and 48 volts. The available rated powers go from 15 to 1000 watts.
 

In order to meet the needs for home appliance, power tools, office and portable equipment, vehicle and yacht applications, Mean Well power supply units range includes the enclosed type DC/AC inverter models. The TS, TN and A300 series.
 
With different input voltage ranges, the DC/AC inverters from Mean Well present a high reliability and are available with AC modified sine wave and true sine wave outputs. The available rated powers go from 100 to 3000 watts.
 

Wide range of solutions for your applications!
Murrelektronik's range of M12 flange plug connectors is comprehensive and offers solutions for all different kinds of applications. One highlight are the food & beverage models, made of V4A stainless steel – their hygienic design makes cleaning very easy.

Murrelektronik's M12 flange plug connectors are available as male and female with different pole numbers, ranging from 4- to 12-poles. There are also flange plug connectors for front and rear panel installation. Models with B- and D-coding can be used in fieldbus applications.
 

More than 4000 possible insertion combinations.
Interfaces from the control cabinet to the field are an important part of every flexible application.

We provide solutions for your individual requirements with our comprehensive range of cabinet entry for you to connect to your controller inside the system. Front-panel interfaces make it easy to connect without even having to open the doors. More than 4000 possible insertion combinations provide maximum flexibility.

 

Murrelektronik's TREE series switches can connect Ethernet terminal devices. The new TREE67 models - equipped with four or eight M12 ports - are suitable for applications in harsh industrial environments. They make it possible to cost-effectively implement decentralized machine concepts in star topologies.
The new IP67 switches are immune to EM interference and resistant to vibrations. They work flawlessly in applications with a wide temperature range: from -25°C to 60°C. 

The four or eight M12 connections (d-coded) support transfer rates of 10 or 100 MBit/s. With the auto-negotiation function, the devices automatically detect which rate is currently needed. VLAN tagged Profinet frames always have the right of way, they are automatically prioritized in the traffic. 
 

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addressed by the USB-to-CAN V2 IXXAT® - HMS – in both the industrial and the automotive sectors.
 

The Metrel aPAT Link Android application is a new and revolutionary Portable Appliance Testing software tool.
 
The application simplifies the portable appliance testing and tagging process, reduces the working time, reduces errors, increases flexibility for printer/scanner connectivity, and improves overall user efficiency.

An Android device with the aPAT application creates flexibility by serving as a link between PAT tester, barcode scanner and printer. The application also uses a smart phone’s built in camera as a QR code reader.
 

The Kobold all stainless steel pressure gauges are ideal for the hard conditions and the resulting high demands on pressure measurement in production facilities in chemical industry and other comparable areas.
 
Resistance to aggressive media and environments is achieved by using high-graded materials such as stainless steel both for the movement and the housing. They can be used for liquid or gaseous substances which do not crystallize and are not highly viscous. The extensive range of options allows the user to adapt the instruments to his own special requirements.
All the pressure gauges comply with general international guidelines and take account of standard as well as application specific requirements. They are the result of the over 70 years’ experience we have in building pressure gauges.