Data transmission sensors

Data transmission photoelectric sensors ISD300/400 - Sick

The ISD300/400 photoelectric sensors for data transmission enable optical wireless communication along the path of the beam.

This system is a friction-free alternative to trailing cables, e.g. in high-bay stackers.
The system consists of a device pair, i.e. optical data sender and receiver. Both units can communicate in both directions over large distances. The point-to-point light beam is monitored during data transmissions. Interruption of the light beams is indicated both optically on the device and signaled via a special function interface.
View detail

Gateway Wireless Bolt - Anybus® - HMS

Wireless connector giving a machine or cabinet wireless access via Bluetooth® or Wireless LAN (WLAN).
 
Gateway wireless bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).

On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as TCP/IP and UDP.
 
View detail

Gateway Wireless Bridge II - Anybus® - HMS

View detail

Gateways Wireless Bridge - Anybus® - HMS

Anybus Wireless Bridge allows industrial Ethernet based equipment to be installed with wireless technology and makes it possible to bridge protocols such as PROFINET, EtherNet/IP, Modbus-TCP, BACnet/IP etc. over a distance of up to 1000 meters (open air range). 

Wireless transmission is made via Bluetooth or WLAN technology. While the WLAN solution provides higher bandwidth thanks to a wider frequency range of the transmitted wireless signals, the Bluetooth solution offers an even more reliable and noise immune wireless link since Bluetooth switches between different frequencies.
View detail
  • 0
  • 1
By using this website, you agree to the use of cookies for analysis, customized content and ad serving.