Home
Online store
Probe configurator
Contacts

Products

Pneumatic pressure test pump 918 - Additel

Nowadays almost all industries have manometers, transducers and pressure switches that need to be checked or calibrated.
 
For this purpose we need high precision standards to compare and record deviations. These standards can be used on the ground or in the lab bench.
The 918 Pneumatic Pressure Test Pump is a manual pressure pump designed to generate pressure from 95% vacuum at 1,500psi (100bar).
 
View detail

Calibration software PCAL - Additel

The Additel PCal pressure calibration software is used with the 681 pressure gauges, 672 calibrators, and any of the 9XX pumps.
 
View detail

Digital Pressure Calibrators 672 - Additel

With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the digital pressure calibrators 672 series precision pressure calibrators from Additel provide a pressure calibration solution for gauges, transmitters, and switches over a wide pressure range.
 
The Additel 672 digital pressure calibrators is a very portable device and can measure pressure precisely with a built-in pressure sensor, as well as read the current or mV produced by a transducer. It can even supply an excitation voltage to power sensors or transmitters during calibration. In order to reach 0.025% F. S. accuracy up to 10,000 psi (700 bar) and 0.1% F. S. accuracy up to 36,000 psi (2,500 bar), every silicon pressure sensor in our gauges has been specially aged, tested and screened before assembly. The 672 series precision pressure calibrators are unmatched in performance and reliability.
 
View detail

Digital pressure dauges 681 - Additel

With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 681 series digital pressure gauges from Additel provide an accurate, reliable, and economic solution for a wide range of pressure applications.
 
They are loaded with functionality and remarkably easy to use. To reach the best performance, every silicon pressure sensor in our gauges is specially aged, tested and screened before assembly. The 681 series digital pressure gauges from Additel are unmatched in performance and reliability. Best of all, they are very affordable.
 
View detail

Digital wireless pressure gauge with logger - ADT680W - Additel

With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 680 series digital pressure gauges provide an accurate, reliable, and economic solution for a wide range of pressure applications.
 
They are loaded with functionality and remarkably easy to use. To reach the best performance, every silicon pressure sensor in our gauges is specially aged, tested and screened before assembly. With data logging and wireless features, the 680W gauge can store pressure measurement data in the internal memory or display them on PC through wireless communication. The 680 series digital pressure gauges are unmatched in performance and reliability. Best of all, they are very affordable.
 
View detail

Dry well calibrator ADT875-155 - Additel

The ADT875-155 is the new dry block calibrator from Additel. With this calibrator Additel enters in the temperature calibration world. It combines excellent stability, radial and axial uniformity, quickly. With the PC option we add the 3-channel temperature reading capabilities with a process calibrator.
 
The calibrator has a range of use of -40 to 155ºC, resolution of 0,01ºC, precision of ± 0,18ºC and stability of ± 0,01ºC in full scale. The Process Calibrator (PC) option combines the many functions of a HART Process Calibrator with a Temperature Calibrator. With this option we have the ability to read a reference RTD plus 2 channels of signal mA, V, switch, RTD or thermocouple. In addition, the calibrator allows you to create tasks and HART communication. Let’s you capture screen images for future needs with the one touch of a button. Using a reference RTD it is possible to control the calibrator by the reference probe or the internal probe.



 
View detail

Hydraulic pressure calibration pump (oil-free) ADT 938 - Additel

The 938 hydraulic high pressure test pump is specially designed for calibrating oil-free pressure measuring instruments in the range of 85% vacuum to 15,000 psi (1,000 bar). All parts used in the pump have been carefully cleaned to remove oil.
 
The pump uses water as the media. With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly. A specially designed shut-off valve makes the pressure as stable as possible during calibration. With no check valve (non-returning valve), the 938 avoids the troublesome leakage issues that is usually experienced with hand pumps and allows for minimal maintenance. Three hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 938 is an ideal comparison test pump for calibrating oil-free pressure measuring instruments such as test gauges, indicators or transducers in the laboratory.
 
View detail

Hydraulic pressure test pump 927 - Additel

Additel 927 Hydraulic Pressure Test Pump Oil/Water: -12.5 psi to 10,000 psi.
The 927 hydraulic pressure test pump from Additel, is a hand operated pressure pump designed to generate pressure from 85% vacuum to 10,000 psi (700bar).
 
With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly. With no check valve (non-returning valve), the hydraulic pressure test pump from Additel avoids the troublesome leakage issues that is usually experienced with most hand pumps and allows for minimal maintenance. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 927 is an ideal comparison test pump for calibrating pressure measuring instruments such as test gauges, indicators or transducers in the field or laboratory.
 
View detail

Hydraulic ultra-high pressure calibration pump ADT 949 - Additel

Nowadays almost industries have pressure manometers, transducers and switchs that need to be calibrated or verified. For this purpose we need high accuracy standards to compare with and register the deviation. These standards can be used in the field handheld or in the lab bench.

The 949 hydraulic ultra-high pressure test pump is a hand operated pressure pump designed to generate pressure up to 40,000 psi (2,800 bar).
A specially designed shut-off valve makes the pressure as stable as possible during calibration. The 949 is an ideal comparison test pump for calibrating ultra-high pressure measuring instruments such as test gauges, indicators or transducers in the laboratory.
 
View detail

Loop Calibrator ADT209/ADT210 - Additel

The new Additel 209 and 210 loop calibrator series combine ease of use and functionality, making them the ideal tools to troubleshoot your process loop.
 
The ADT209 has an accuracy of 0.03% of reading whereas the ADT210 holds an accuracy of 0.01% of reading.
If you want to source, simulate or simply measure the Additel Loop calibrator series will fit your need. The ADT209 and ADT210 allow for measurement of current, voltage and a switch. You can also simulate or source mA or a process transmitter. With a push of a button, you can switch to zero and span values, auto ramp, and auto step throughout the range. Each loop calibrator has a large, easy to read screen which simultaneously displays the measurement with the % of span.
 
View detail

Loop calibrators multifunction 222A - Additel

The Additel 222A multifunction calibrator is a process tool for measuring, sourcing and simulating mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.
 
A highly integrated multifunction calibrator featuring several patented technologies, the multifunction process calibrator 222A from Additel is an ultra-compact, rugged, and easy to use hand-held device for sourcing, simulating and measuring pressure, temperature, and electrical signals. Its smartphone-like menu and interface make the operation simpler and easier. The multifunction process calibrator 222A is ideal for calibrating, maintaining, and troubleshooting process instrumentations. Automation and documentation capabilities make the 222A a turnkey solution.
 
View detail

Low pressure test pump ADT 901A - Additel

The ADT 901A is a very stable, low pressure manual test pump designed to generate pressures between -0.4 to 0.4 bar.
 
Pressure control is done by a high quality screw that allows fine adjustment with a resolution of 0.001 mbar. Its isothermal chamber is designed to reduce the possible effects of changing ambient temperatures. Most pumps use check valves (non-return valves) and are not well insulated, which causes large fluctuations in pressure with changing ambient temperatures or when touching the unit. The ADT 901A does not use a check valve and is notably more stable. It comes with two quick-release connectors that make it easy to connect sensors, avoiding the use of Teflon tape or tightening wrenches.
 
View detail

New ADT 286 multifunction reference thermometer - Additel

The ADT 286 is industry-first. Additel combined for the first time a high-capacity benchmark thermometer with 8.5-digit multimeter functionality.

The ADT 286 can read and record 82 temperature channels at 10 channels per second. The user can easily configure the equipment to perform field calibrations or uniformity tests, as well as a precision laboratory thermometer or 8.5-digit multimeter. The base unit comes with two precision reading channels that can be used to measure SPRT. Modules capable of measuring 10 RTD's, PRT's or thermistors and 20 thermocouples each can be added. The expansion can be made up to 82 channels.
 
View detail

Pneumatic high-pressure test pump ADT920 - Additel

The 920 High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar).
 
A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 920 is an ideal comparison test pump for pressure instruments calibration.
 
 
View detail

Pneumatic pressure test pump 916 - Additel

Additel 916 Pneumatic Pressure Test Pump Air: -14 psi to 600 psi.
The 916 pneumatic pressure test pump from Additel is a hand operated pressure pump designed to generate pressure from 95% vacuum to 600psi (40bar).
 
A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The pneumatic pressure test pump 916 from Additel is an ideal comparison test pump for pressure instruments calibration.
 
View detail

Pressure calibrator ADT 761A-1K - Additel

The new ADT761A series of pressure calibrators adds value and improvements to the Additel automatic pressure calibrator family. New calibration ranges up to 70bar (without external pressure), removable internal pressure modules, models with 0.01% FS accuracy range, faster readability of 2 external pressure modules, new display touch screen, WiFi, Bluetooth, Ethernet, double battery life, and more.
View detail

Pressure calibrator ADT760 - Additel

A portable automated pressure calibrator in the palm of your hand ADT 760 from vacuum up to 20 bar.
 
The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display.

To generate pressure, simply key in the desired pressure and the Additel 760 will do the rest. Each unit has four channels: one internal pressure channel for source and measure pressures, two external pressure measurement channels, and one electronic measure and source channel. This series of calibrator has three standard models with the option of adding HART communications, documentation and data logging.
View detail

Pressure controller ADT 780 - Additel

For years, we’ve provided the most durable, accurate, quality pressure calibration products for field applications. The Additel 780 series controller incorporates the same durability, accuracy, and quality into a new bench top controller packed with features and functionality that is remarkably easy to use.
 
Each unit comes with one Intelligent Pressure Module configured to the many range offerings provided. Standard accuracy sensors (ADT160A-CPXXX) are silicon pressure sensors with a 1 year accuracy of 0.02% FS. The precision quartz based sensors improve the 1 year accuracy specification to 0.005% of reading + 0.005% FS.
Built-in capability, includes current and voltage measurement capability, 24 volt loop power, HART® and Profibus PA communication, switch measurement capability, selectable analog output and much more.
 
View detail
  • 0
  • 1
We use our own and third-party cookies to offer you a better experience and service. To know which cookies we use and how to disable them, read the cookies policy.
By ignoring or closing this message, and unless you have disabled cookies, you agree to its use on this device.