The KDL/C and KDL/D systems provide the entry and lead through of pre-assembled cables. 
The KDL/C and KDL/D system is a divisible system that offers an easy and quick installation in the control cabinet and clamping box for up to 12 pre-assembled cables with a very high packing density. 

The KDL/C cable entry system is used for inserting pre-assembled cables. The KDL/C system is a split table system that enables the quick and simple installation of up to 12 pre-assembled cables with a high packing density in switch cabinets and terminal boxes.

The KDL/D cable entry system is used for inserting pre-assembled cables. The KDL/D system is a split table system that enables the quick and simple installation of up to 12 pre-assembled cables with a high packing density in switch cabinets and terminal boxes. In addition, the KDL/D system offers a very high protection class and a very robust design.
Uninterrupted cable guidance;

Features

• Fits standard cut-outs;
• Cable installation without interruption;
• Standard cut-out dimensions;
• Protection class up to IP65;
• Integrated strain relief;
• Easy assembly;
• Very stable construction.

Advantages

Designed for high mechanical stresses 
In contrast to the KDL/C, the KDL/D model is fitted with an extra bridge that further strengthens the rugged frame. This extra bridge is used as an additional anchor point, with which every routed cable can be fixed rock-solid with full strain relief. This makes grommet stripping almost impossible – even under extremely severe mechanical loads.

New mounting systems simplify installation 
Murrplastik’s engineers have completely redesigned the mounting system. Instead of the usual approach, i.e. snapping the cable plus grommet into the cable entry unit vertically from above – so as to then fix the cable entry itself in the switch cabinet cut-out – it’s now all a lot simpler: the cable entry is pre-installed in the cabinet and cable plus grommet is then simply pushed in horizontally – and tool-free – from the front. This is an especial advantage for during retrofitting work and repairs on pre-fabricated cabling. For practical purposes, cable and grommet can thus be pre-assembled to save time. Additional benefit: cabling no longer needs to be pulled out of the cabinet (with about 30 cm of free cable) to attach the grommets. For the first time, then, this means the cable entry plate can be assembled post-installation without needing any awkward lengths of free cable. 

Optimum features for practical industry use 
Both cable entry models can be used to install wiring with a high packing density in very tight form factors, namely 148 x 58 mm. Up to 12 cables can be inserted at the same time. A total of 10 separate grommet models are available, with clamping ranges of between 2 and 12 mm, plus a dummy grommet for closing off any unwanted openings. KDL/ C and KDL/D installation dimensions are matched to the standard cut-outs on the heavy-duty 24-pin Harting and Wieland plug connectors. Manufactured from PP and TPE, both cable entry models are halogen-free and satisfy the V0 (UL 94) flame class.

Industries

• Any industry.

F.Fonseca is the representative of Murrplastik in Portugal.