PrintSuggestShareMore info

Process, Instrumentation & Environment

Dry block calibrator TE-650P- Presys

The TE-650P block calibrator from Presys shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from room temperature to 650ºC, with an accuracy of ±0.13ºC + 0.13% of reading, stability of ± 0.1ºC and resolution of 0.01ºC.
more details
Request Offer
With a built-in controller and calibrator, the TE-650P performs automatic temperature calibration operations and programmable cycles for thermocouples, resistance thermometers and thermostats.
Being a 3 in 1, it incorporates the function of thermal bath type dry block, with a standard thermometer and a calibrator for measuring signals generated by thermocouples, resistance thermometers, mA, mV, Ohm and thermostats, eliminating the need for a second calibrator and a computer to do its calibration work.
It has a regulated 24Vdc power supply and mA input for two-wire transmitters. Performs automatic calibrations with and without a computer. It has documentation capacity, via PC and ISOPLAN software. It is portable, compact and has interchangeable inserts.
  • Temperature range: ambient temperature to 650ºC;
  • Accuracy: ±0.13ºC;
  • Resolution: 0.01ºC;
  • Stability: ±0.13ºC;
  • Uniformity: ±0.07ºC;
  • Power: 1000 W;
  • Input: thermocouple J|K|T|N|L|R|S, Pt100, Pt1000, Cu10, Ni100, mA, mV and Ohm;
  • 24Vdc power supply for transmitters;
  • Accuracy of cold joint compensation (CJC): ±0.2ºC;
  • ITS-90 or IPTS-68;
  • ºC and ºF;
  • Power supply: 230Vac.
  • Excellent cost/benefit ratio;
  • Portability;
  • 3 in 1: dry block calibrator + standard probe + electrical signals calibrator.
  • Field calibration work;
  • Laboratories;
  • Maintenance.

F.Fonseca is the representative of Presys in Portugal.
  • 0
  • 1