Process, Instrumentation & Environment

Multitec® BioControl 4/8 – Sewerin

Combined stationary measuring device with mobile gas meter.

The Multitec® BioControl is a combined measuring device consisting of the Multitec® BioControl fixed installation and a mobile gas measuring device, namely the Multitec® 540/545.

Depending on the version of Multitec® BioControl, the gas composition and volume can be automatically measured and monitored at up to eight measurement locations. The Multitec® 540/545 measures the values at the individual measurement locations sequentially. The values are transferred to the Multitec® BioControl via an interface.

The mobile gas measuring device must be regularly maintained to guarantee accurate measuring results. The Multitec® BioControl allows easy maintenance for the versions with four and eight measurement locations as standard, with automatic calibration and adjustment with test gas.
more details
Request Offer
The Multitec® BioControl fixed installation is non-wearing and low maintenance. All that is required is a regular check for dirt on the flow rate and temperature sensor and cleaning if necessary. This can be done in a few minutes whilst measuring. The mobile Multitec® 540/545 gas measuring device can be easily sent in for servicing. A spare device prevents disruption to operation.

Individual measuring locations can also be set up for mobile, i.e. manual measurement if preferred. The Multitec® 540/545 is simply taken out of the Multitec® BioControl docking station for the measurement. When it is replaced in the docking station following a mobile measurement, the stored logs are transferred to the Multitec® BioControl and displayed.

Mobile measurements allow you to integrate even remote outdoor measuring points reliably and cost-effectively in the system. ATEX-certified flow rate and temperature transmitters, which can be permanently installed outdoors, are available as optional accessories.

  • Large colour touch screen;
  • Custom configuration according to requirements specification;
  • All settings password-protected;
  • Continuous self-testing throughout operation;
  • All relevant components resistant to aggressive gases;
  • Autonomous and regular saving of all measurement values and settings on USB stick;
  • Remote maintenance and diagnostics available via Internet.

  • Combined stationary measuring device (all automatic operation) with mobile gas meter;
  • Intelligent compensation of pressure, temperature, moisture and gas composition;
  • Gas composition and volume can be automatically measured and monitored at up to eight measurement locations;
  • Automatic system adjustment and calibration.

  • Monitoring of BIOGAS components;
  • Warning of explosive gas mixtures;
  • Warning of gases that endanger health;
  • Warning of non-combustible gases.

F.Fonseca is distributor of Sewerin in Portugal.
  • 0
  • 1