Home
Online store
Probe configurator
Contacts

Process, Instrumentation & Environment?

Biogás measuring analyser Multitec 540 – Sewerin

PrintSuggestShareMore info
Combined stationary measuring device with mobile gas meter.

The Multitec® BioControl is a combined measuring device consisting of the Multitec® BioControl fixed installation and a mobile gas measuring device, namely the Multitec® 540.

Depending on the version of Multitec® BioControl, the gas composition and volume can be automatically measured and monitored at up to eight measurement locations. The Multitec® 540 measures the values at the individual measurement locations sequentially. The values are transferred to the Multitec® BioControl via an interface.

The mobile gas measuring device must be regularly maintained to guarantee accurate measuring results. The Multitec® BioControl allows easy maintenance for the versions with four and eight measurement locations as standard, with automatic calibration and adjustment with test gas.
more details
Request proposal
The Multitec® BioControl fixed installation is non-wearing and low maintenance. All that is required is a regular check for dirt on the flow rate and temperature sensor and cleaning if necessary. This can be done in a few minutes whilst measuring. The mobile Multitec® 540 gas measuring device can be easily sent in for servicing. A spare device prevents disruption to operation.

Individual measuring locations can also be set up for mobile, i.e. manual measurement if preferred. The Multitec® 540 is simply taken out of the Multitec® BioControl docking station for the measurement. When it is replaced in the docking station following a mobile measurement, the stored logs are transferred to the Multitec® BioControl and displayed.

Mobile measurements allow you to integrate even remote outdoor measuring points reliably and cost-effectively in the system. ATEX-certified flow rate and temperature transmitters, which can be permanently installed outdoors, are available as optional accessories.

Features
  • Large colour touch screen;
  • Custom configuration according to requirements specification;
  • All settings password-protected;
  • Continuous self-testing throughout operation;
  • All relevant components resistant to aggressive gases;
  • Autonomous and regular saving of all measurement values and settings on USB stick;
  • Remote maintenance and diagnostics available via Internet.

Advantages
  • Combined stationary measuring device (all automatic operation) with mobile gas meter;
  • Mobile measurement data transfer to base station;
  • Intelligent compensation of pressure, temperature, moisture and gas composition;
  • Gas composition and volume can be automatically measured and monitored at up to eight measurement locations;
  • Automatic system adjustment and calibration.

Industries
  • Monitoring of Biogas components;
  • Warning of explosive gas mixtures;
  • Warning of gases that endanger health;
  • Warning of non-combustible gases.

Ref. A1513708800013632
F.Fonseca is the representative of the Sewerin in Portugal.
 
  • 0
  • 1
We use our own and third-party cookies to offer you a better experience and service. To know which cookies we use and how to disable them, read the cookies policy.
By ignoring or closing this message, and unless you have disabled cookies, you agree to its use on this device.