PrintSuggestShareMore info

Building Technologies

Gateways protocol translators Intesis® 700 series – HMS

HMS Networks present Intesis® 700 series for protocol translation, a new concept that breaks the old reliance between hardware and software.
This concept enables interfaces for multiple Building Automation protocols in the same hardware so, the user can pair the combination using Intesis MAPS. The process is called late configuration.
more details
Request Offer
Adapt your protocol translator to each project’s needs.
Having different protocols available on the same hardware enables multiple possibilities for integration. Each one of the combinations is defined as an application.
This is HMS Networks' new approach to building automation protocol translation, reducing the number of order codes, and increasing their configuration flexibility.
This way distributors can increase their stock and simplify order code management, while integrators can configure gateways with new applications (no need to know the type of integration beforehand).
  • IN-701 KNX is the common platform for KNX
This gateway has communication interfaces compatible with KNX, BACnet, Modbus, and ASCII, allowing choosing the desired combination later in the configuration phase. The available options are:
KNX - Modbus Server
Modbus-KNX client
KNX - BACnet server
BACnet-KNX client
KNX - ASCII server
  • IN700-485 Series is the protocol translator with Serial and IP support
Provided with communication interfaces compatible with BACnet, Modbus, and ASCII, allows choosing the desired combination in the configuration phase. The options are: 
Modbus client - BACnet server
BACnet client - Modbus server
BACnet client - ASCII server
IN703-DAL Series is the common platform for DALI
Enable a series of applications to connect DALI, DALI-2 devices into BACnet and Modbus-based BMS systems. The options are:
DALI-2 – BACnet server (1x channel)
DALI-2 – Modbus server (1x channel)
DALI-2 – BACnet server (2x channel)
DALI-2 – Modbus server (2x channel)
IN702-MEB Series is the protocol translator with M-BUS, Serial and IP support
(coming soon)
IN708-KMB Series is the protocol translator with KNX and M-BUS
(coming soon)

The platforms are available in different versions depending on the number of variables to be integrated, supporting from 100 up to 3000 points.
  • Configuration and diagnosis with MAPS: MAPS is the universal configuration tool for Intesis protocol translators. It is a free tool that allows using device templates to import data automatically, it supports conversions such as scaling and offset to transform data values and enables advanced diagnostics and troubleshooting. This way you can reduce the commissioning time. Now, for 700 Series products, it also enables application swap, reducing potential interactions with help desk technicians.
  • Building automation;
  • Communication interfaces;
  • Edge gateways;
  • Network-to-network connectivity;
  • System integration.

F.Fonseca is the representative of Intesis - HMS in Portugal.
  • 0
  • 1