Gases / Particles Analyzers

Combustion gas analysers Testo 330i

Proven technology meets revolutionary operation

The Combustion gas analysers Testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The Combustion gas analysers Testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.

BIOGAS analyser Multitec 545 - Sewerin

Multi-gas measuring device with infrared sensors and extended measuring range for hydrogen sulphide.

With the Multitec 545, up to five gases can be measured simultaneously. The very high H2S concentrations in wastewater treatment plants and palm oil factories, for example, place special demands on the measuring instrument. With its rugged design and wide H2S measuring range, the Multitec 545 is ideal for this use.

BIOGAS analyzer Multitec® BioControl 2 - Sewerin

The entry-level model for individual process optimization.

The BIOGAS analyser Multitec® BioControl2 da Sewerin is a unique measuring system comprising a fixed stationary unit and a mobile gas measuring device. It is used in small to medium-sized BIOGAS plants, landfills, wastewater treatment plants and composting plants.

BIOGAS measuring analyser Multitec 540 – Sewerin

Combined stationary measuring device with mobile gas meter.

The Multitec® BioControl is a combined measuring device consisting of the Multitec® BioControl fixed installation and a mobile gas measuring device, namely the Multitec® 540.

Depending on the version of Multitec® BioControl, the gas composition and volume can be automatically measured and monitored at up to eight measurement locations. The Multitec® 540 measures the values at the individual measurement locations sequentially. The values are transferred to the Multitec® BioControl via an interface.

The mobile gas measuring device must be regularly maintained to guarantee accurate measuring results. The Multitec® BioControl allows easy maintenance for the versions with four and eight measurement locations as standard, with automatic calibration and adjustment with test gas.

Combustion gas analysers – Control Unit Testo 350

The control unit with the large graphic display is the element of display and control of the Testo 350. 

Can be removed and the base is equipped with a rechargeable lithium battery. All settings are performed using the cursor. The presentation of measurement values is performed through multi-color graphics display. Thanks to the internal memory, the measurement data can be downloaded from the box analysis to the control unit. If necessary, can be used and controlled several boxes of analysis using only one control unit.

Combustion gas analysers – Testo 330-1 LL

Thanks to the new instrument functions, the Testo flue gas analyzers of the new Testo 330-LL series now offer you even more professional and reliable support.

Dust concentration measuring system DUSTHUNTER T200 – SICK

Dust concentration measuring system.

The DUSTHUNTER T200 is a type-approved measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender-receiver and reflector unit as well as an automatic self-alignment of the optical assembly.

Dust monitor in wet flue gas FWE200DH - SICK

Reliable dust measurement in wet gases.
The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a sampling probe and heated above dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables even very low dust concentrations to be measured.

The FWE200DH meets the requirements of EN 14181 and EN 15267.

Dust monitor with two measuring principles DUSTHUNTER C200 - SICK

Dust monitor with two measuring principles.

The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles transmittance and scattered light forward. Therefore, it is ideal for measurement of very low to high dust concentrations.

The automatic self-alignment optimizes the position of the measuring beam and prevents incorrect measurement. An automatic check of zero and reference point as well as a contamination monitoring is integrated in the device.

Dust monitor with two measuring principles DUSTHUNTER SP100 - SICK

Exhaust gases from cement production or similar applications are usually loaded with dust particles. Environmental protection legislation requires that the dust is removed before the gas is released into the atmosphere.
The SICK dust monitor DUSTHUNTER SP100 measures even low dust concentrations and thus detects any filter errors. An automatic zero and reference point check is integrated to reduce the need for maintenance.

Extractive gas analyzers MCS300P HW – SICK

The MCS300P HW is a hot/wet extractive analyzer system for measuring gases. 
It detects IR- or VIS-active components with variable measuring ranges for monitoring and regulating combustion processes and exhaust gas purification systems. The heated system components prevent the water and acid dew points from being undercut.

Fixed gas analyser IN SITU ZIRKOR302 – SICK

The other kind of oxygen measurement.
The ZIRKOR302 in-situ gas analyzer from SICK can be relied upon to measure oxygen quickly even at increased temperatures.
Thanks to the flow sensor measurement principle, it does not require expensive test gases – ambient air is sufficient. The analyzer is not an ignition source in the measurement gas due to its safety-related construction. The optional evaluation unit allows you to operate up to three analyzers.

Fixed gas analyser MCS100FT - SICK

FTIR multi-component analyzing system, for emissions and raw gas monitoring - also with high acid dew point measuring ranges

The FTIR measuring principle allows the simultaneous determination of more than 10 measuring components - tailor made for the particular requirements of the customer. The MCS100FT with its heated measuring cell enables the monitoring of hydrogen fluoride limits as requested by legislation. 

The MCS100FT is equipped with an oxygen sensor as standard and can be supplemented with a total hydrocarbon analyzer. With its very reliable measuring technology, its comfortable operation and the low maintenance effort, the MCS100FT provides a careless package that offers unequalled opportunities. 

Variants MCS100E CD - Analyzer system with sample gas cooler;  MCS100E HW - Analyzer system with hot measurement technology;  MCS100E PD - Analyzer system with permeation dryer;  MERCEM - Continuous emission monitoring system for mercury.

Fixed gas analyser SIDOR - SICK

The SIDOR is a fixed gas analyzer for measurement of up to two infrared components. Additionally oxygen can be measured by integration of an electrochemical or paramagnetic measuring cell. A significant characteristic is a half-yearly maintenance interval with test gases.

The stability of the measuring cells allows an adjustment with only inert gas or ambient air within this half-year period. Sample gas pressure compensation is included as a standard.

The SIDOR was type approved for large combustion plants and crematories. With the type examination according to ATEX the gas analyzer SIDOR satisfies all actual regulations and directives. It is the ideal device for security relevant measurements of methane, carbon dioxide and oxygen.

Fixed gas analysers GHG-CONTROL – SICK

Measurement system in-situ and integrated greenhouse gases. 

Continuous, reliable, and real-time measurement of the current CO2 and N2O load: The gas analyzer GHG-Control from SICK is the only in-situ solution that provides companies with an overview of the amount greenhouse gases emitted at any time. GHG-Control records the CO2-/N2O gas concentrations and their volume flow and determines the total quantity very precisely. 

Fixed gas analysers SICK MAC / GMS 800 - SICK

Modular fully configurable system for extractive gas analysis.

The innovative system SICK MAC / GMS 800 is a modular fully configurable system that meets the European Standards EN 15267 and EN 14181 for emission monitoring.

The SICK MAC / GMS 800 versions provide monitoring to meet current directives as well as future requirements, for example emission monitoring in plants with lignite and hard coal firing, gas firing, gas turbines as well as measurement of greenhouse gases.

Fixed gas oxigen analyser IN SITU ZIRKOR100 - SICK

Oxygen measurement made easy!
The ZIRKOR100 gas analyzer from SICK provides robust and reliable oxygen measurement for small combustion plants.
It is characterized by a measurement cell with a long service life and a diagnostic function. This significantly reduces maintenance effort. The ZIRKOR remote app allows you to wirelessly access the analyzer quickly and easily.

Fixed gas oxigen analyser IN SITU ZIRKOR200 - SICK

Already has the innovation in the cells!
SICK’s ZIRKOR200 gas analyzer provides very robust, reliable, and suitability-tested oxygen measurement for small and large combustion plants.

The ZIRKOR200 is characterized by a measurement cell with a particularly long service life.

Fixed gas oxigen analyser TRANSIC100LP - SICK

TRANSIC100LP is a fixed gas oxigen analyzer from SICK ideally suitable for oxygen monitoring in moist and aggressive process gases.

The compact gas spectrometer is based on a tunable diode laser. This measurement technology is well known for unmatched stability and durability. In many applications, the TRANSIC100LP can be flange mounted directly into a process. 

This results in real-time measuring values. For processes with high temperatures and pressures or at difficult mounting conditions TRANSIC100LP can be configured with an optional sample cell close to the process in the slip stream.

Flue gas analyzer portable - testo 340

Flue gas analyzer for use in industry.
Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
Precise technology: That’s what you want to be able to rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer ticks all these boxes.
The testo 340 combustion analyzer. For industrial emission measurements and more.

Flue gas analyzer T300 Longlife - Testo

Truly smart flue gas measurement on heating systems with the testo 300 flue gas analyzer. High-quality sensors, intuitive operation with smart-touch technology and smart features, such as efficient documentation and e-mailing of reports, will make your day-to-day work easier.

Gas analyser PowerCEMS100 - SICK

PowerCEMS100 - High-performance, future-proof CEMS for emission measurement.
The PowerCEMS100 continuous emission monitoring system (CEMS) is an economically and technically perfect solution for extractive measurement tasks. This all-in-one system comprises high-quality standard assemblies and components and can be adapted to the application-specific requirements thanks to its modular system design. Retrofitting analyzer modules or gas conditioners is easy and inexpensive. The innovative PowerCEMS100 system is certified according to European standards EN 15267-1/-3 and EN 14181, and offers future-proof solutions for emission measurement and process applications.

Gas analyser PowerCEMS50 - SICK

PowerCEMS50 - Efficient and easy measurement of emissions
The SICK PowerCEMS50 continuous emission monitoring system (CEMS) was specially developed for measuring the emissions from fossil fuel power plants. The extractive basic system, which features an analyzer and a gas conditioner, is designed for measuring the typical gas components CO, NOx, SO2, and O2. The PowerCEMS50 analyzer system is characterized by its compact design and attractive price/performance ratio, with no compromise in performance in industrial use.

Gas flow analyzer Flowsic100 Process - SICK

With the FLOWSIC100 Process gas flow measurement devices, measurements can be taken at pressures up to 16 bar – even in zone 2 explosive environments.
The sender/receiver units are available as hermetically sealed designs made of stainless steel or titanium. The standard system contains an MCU control unit and 2 sender/receiver units or a single measuring probe. The MCU is used for signal input and output and to calculate reference values (standardization) or mass flow. It also serves as a user-friendly LCD interface.
Page 1 of 2
  • 0
  • 1