Online store
Probe configurator

Electrical Safety testers

Advanced portable appliance testing application with A 1434 aPAT Android - Metrel

The Metrel aPAT Link Android application is a new and revolutionary Portable Appliance Testing software tool.
The application simplifies the portable appliance testing and tagging process, reduces the working time, reduces errors, increases flexibility for printer/scanner connectivity, and improves overall user efficiency.

An Android device with the aPAT application creates flexibility by serving as a link between PAT tester, barcode scanner and printer. The application also uses a smart phone’s built in camera as a QR code reader.
View detail

Electrical installation safety tester MI 3152 Eurotest XC - Metrel

MI 3152 EurotestXC is an instrument from the new generation of Metrel’s multifunctional measuring instruments.
The already well known functions like complete installation safety testing according to IEC/EN 61557 and auto sequence testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large color touch screen display. A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement up to RCD tests, line and loop impedance tests and earth resistance measurements.
View detail

Electrical installation safety tester MI 3155 Eurotest XC – Metrel

Are you prepared for the mandatory inspection of electrical installations?

The Directive 2005/36/CE and 2006/123/CE were fundamental to create the new Portuguese law no. 96/2017 entered into force in January 2018, making it necessary to update many old electrical installations and inspect them, not only due to the new law, but also due to the deterioration of their quality and safety.

For this purpose F.Fonseca sells instruments from Metrel as the new model MI 3155, which allows carrying out all the required tests by the directive.  
View detail

Electrical photovoltaic (PV) tester MI 3109 - Metrel

Metrel MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations.
This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.
View detail

Electrical safety tester for electrical vehicle battery chargers - Metrel

The A 1532 EVSE adapter is a special accessory intended for testing Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers.

It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. If used together with the MI 3152 EurotestXC’s AUTO SEQUENCE®, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.
View detail

Electrical safety testing on portable electrical equipment with MI 3309 BT DeltaGT - Metrel

All portable electrical equipment must comply with certain requirements for electrical safety with the user and should therefore be subjected to rigorous electrical testing instruments such as the MI 3309 from Metrel.
The MI 3309 enables measurement of earth resistance, insulation resistance and leakage/load current and TRMS voltage. Still allows the differential leakage current test, the touch leakage current test and differential test.
The test result can be positive or negative depending on the values ​​that are programmed into the instrument by the user.
View detail

Electrical tester EurotestXE MI3102 - Metrel

EurotestXE is a typical representative from a new line of Metrel´s installation safety testers.
Key advantages like a lightweight design and small dimensions are completed with extensive measurement features.
This equipment for electrical installation safety tests has a clear, fast and easy user friendly interface.

View detail

Electrical tester MI 3105 - Metrel

Multi-function test instrument, model MI 3105 EUROTEST XA.
The fifth generation of Metrel’s multifunction installation testers brought know-how in the testing procedures to reality.
Because of the need to be efficient, faster and competitive but still responsible and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE ®, rotate around taking care about testing procedures itself.
View detail

Electrical tester MI 3108 - Metrel

Combined photovoltaic tester and electrical installations safety tester model MI 3108 Eurotest PV.
It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations.
The instrument allows all the tests as required by EN 62446, but also includes I - U characteristic, calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety, the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.
View detail

Electrical tester MI 3325 MultiServicer XD - Metrel

The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must.
In Metrel range of the instruments it is introduced as a successor of MI 3321 MultiServicerXA. The new platform integrated in the MI 3325 MultiServicerXD features support for colour touch screen technology, advanced memory organizer including large SD memory card storage media and state of the art AUTOSEQUENCE®s.
View detail

Electrical tester MI 3394 CE MultiTester XA - Metrel

The MI 3394 CE MultiTesterXA from Metrel is a portable instrument intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during the production.
The PC software MES-Manager enables the upload of automated test sequences, projects, downloading of test results to the PC, automatic data storage into a file and printing of test reports. Due to selected test functions, durable construction and accompanying PC SW package CE MultiTesterXA is the perfect instrument for electrical safety testing in the most demanding environments like laboratories, automated production lines or specialized workshops.
View detail

Electrical tester MI-3125 Eurotest Combo - Metrel

MI 3125 Eurotest Combo from Metrel is the appropriate instrument for the installation safety testing on TT and TN systems.
The bright graphic display with backlight ensures that results, indications, measurement parameters and messages are clear, visible and easy to read. The red and green
LEDs on either side of the display provide a clear PASS / FAIL evaluation of test results. The Electrical tester MI-3125 Eurotest Combo contains integrated characteristics of fuses and RCDs for the automatic evaluation of the line / loop impedance results.
The handling of the instrument is designed to be as simple and clear as possible. Each test has its own individual help screen describing how to connect the instrument into the installation and how to perform a measurement.

View detail
  • 0
  • 1
We use our own and third-party cookies to offer you a better experience and service. To know which cookies we use and how to disable them, read the cookies policy.
By ignoring or closing this message, and unless you have disabled cookies, you agree to its use on this device.