Measurement devices

Data acquisition system - Saveris 2 - Testo

New concept of data acquisition with the Saveris 2 via WLAN and Cloud.
Nowadays the market requires solutions with the latest technology and signal acquisition with the concept of "cloud" designates the informatics revolution of access to measured data from any point in the world and from any device with Internet Explorer like PC, phone or tablet.
The acquisition system Testo Saveris 2 is a modern solution for monitoring of temperature and humidity values in storage rooms and work rooms. Loggers from Testo send the data directly to the Cloud that stores the values safely via WLAN, with an adjustable time range.
View detail

Dataloggers - Testo 175 T1

Testo 175 T1, 1-channel temperature logger with internal sensor (NTC) incl. wall holder, lock, batteries and calibration protocol.
The Datalogger Testo 175 T1 is the compact data logger for the long-term monitoring of refrigerated and deep-freeze rooms as well as for the documentation of transport temperature in delivery vehicles.
The large 1 million measurement value memory and the long-life batteries allow readout at greater intervals, in spite of the shorter measurement rate. Like all Testo data loggers for applications in the food sector, the Testo 175 T1 is tested according to DIN EN 12830 by the ATP testing section of the TÜV Süd for HACCP purposes.
View detail

Dataloggers - Testo 176 T3

It is sometimes important to test whether the prescribed temperature limit values in a process are being adhered to.
The Testo 176 T3 in its robust metal housing is the right data logger for parallel measurement and recording of temperature values at 4 different sites in industrial processes. The requirements of a many different applications can be fulfilled using a broad range of connectable thermocouple probes (Type K, Type T, Type J).
View detail

Dataloggers - Testo Saveris

The base is the heart of Datalogger Testo Saveris and can save 40.000 readings per channel measurement independent of the PC, which corresponds to a year capacity memory with a measurement interval of 15 minutes. A stack help ensures that any alarm is transmitted and not lose any data in case of power failure. The system data and alarms are displayed Saveris the display base. Even if the PC is off, the base emits a alarm via LED exceeded some threshold value, or optionally via SMS or via the relay output which can connect a transmitter alarm.

In total, a base can incorporate 150 radio and Ethernet probes or 254 measurement channels. The Datalogger Testo Saveris base is connected to a PC through a cable USB or Ethernet. The base Saveris provides a high versatility with greater security.
View detail

Dataloggers - Testo Saveris T1

Probe NTC internal radio Saveris T1.
The probes are radio optionally available with or without display. Similarly shows the current measurement data, the battery status and quality of radio signal.
The probes radio-frequency testo Saveris measure temperature and moisture. In the measurement cycle, the probes recorded measurement data and send it to the central base at regular intervals. If the threshold is exceeded, the radio connection is established immediately.
Through bidirectional transmission, the radio frequency probe and the base contact is each other. This, however, ensures that measurement data are only registered and do not suffer interference from other radio systems frequency.
View detail

Dataloggers – Testo 184

The black box to securely transport goods in the pharmaceutical, food and Hospital areas.
Monitoring temperature, humidity and vibration in accordance with all applicable laws, rules and regulations is essential for transporting delicate goods.
Whether working with food or drugs, both types of products have certain needs of refrigeration during transport and under no circumstances the cold chain can be stopped between the manufacturer and the consumer. Otherwise, you may affect the quality, produce financial losses or even serious damage to the health of consumers or patients.
View detail

Dataloggers – Testo Saveris U1E

Saveris U1E Coupler with 1 Ethernet channel analog current/voltage.
In addition to the radio probes, probes can be used connected directly to Ethernet. For this you can use the existing LAN infrastructure.
The internal memory ensures that measurement data are not lost even that fails to provide electricity or LAN connection.
The display shows the current measurement data and the status of the probe.
The different versions (probe connectable partially) adapt to any application condition.
View detail

Electrical installation safety tester MI 3152 Eurotest XC - Metrel

MI 3152 EurotestXC is an instrument from the new generation of Metrel’s multifunctional measuring instruments.
The already well known functions like complete installation safety testing according to IEC/EN 61557 and auto sequence testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large color touch screen display. A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement up to RCD tests, line and loop impedance tests and earth resistance measurements.
View detail

Electrical photovoltaic (PV) tester MI 3109 - Metrel

Metrel MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations.
This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.
View detail

Electrical tester EurotestXE MI3102 - Metrel

EurotestXE is a typical representative from a new line of Metrel´s installation safety testers.
Key advantages like a lightweight design and small dimensions are completed with extensive measurement features.
This equipment for electrical installation safety tests has a clear, fast and easy user friendly interface.

View detail

Electrical tester MI 3105 - Metrel

Multi-function test instrument, model MI 3105 EUROTEST XA.
The fifth generation of Metrel’s multifunction installation testers brought know-how in the testing procedures to reality.
Because of the need to be efficient, faster and competitive but still responsible and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE ®, rotate around taking care about testing procedures itself.
View detail

Electrical tester MI 3108 - Metrel

Combined photovoltaic tester and electrical installations safety tester model MI 3108 Eurotest PV.
It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations.
The instrument allows all the tests as required by EN 62446, but also includes I - U characteristic, calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety, the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.
View detail

Electrical tester MI 3394 CE MultiTester XA - Metrel

The MI 3394 CE MultiTesterXA from Metrel is a portable instrument intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during the production.
The PC software MES-Manager enables the upload of automated test sequences, projects, downloading of test results to the PC, automatic data storage into a file and printing of test reports. Due to selected test functions, durable construction and accompanying PC SW package CE MultiTesterXA is the perfect instrument for electrical safety testing in the most demanding environments like laboratories, automated production lines or specialized workshops.
View detail

Electrical tester MI-3125 Eurotest Combo - Metrel

MI 3125 Eurotest Combo from Metrel is the appropriate instrument for the installation safety testing on TT and TN systems.
The bright graphic display with backlight ensures that results, indications, measurement parameters and messages are clear, visible and easy to read. The red and green
LEDs on either side of the display provide a clear PASS / FAIL evaluation of test results. The Electrical tester MI-3125 Eurotest Combo contains integrated characteristics of fuses and RCDs for the automatic evaluation of the line / loop impedance results.
The handling of the instrument is designed to be as simple and clear as possible. Each test has its own individual help screen describing how to connect the instrument into the installation and how to perform a measurement.

View detail

Insulation tester MI-3200 TeraOhm - Metrel

Professional insulation testing with powerful diagnostics tools.
TeraOhm 10 kV is a Metrel professional insulation tester, which allows measuring and testing high voltage equipment.
View detail

IR-Thermal imaging camera 5605 - Peaktech

For troubleshooting of electrical and mechanical equipment and systems, as well as for a variety of other applications, this new thermal imaging camera offers an unbeatable price / performance ratio.
The compact size and intuitive operation, in combination with the technical possibilities of a thermal imaging camera, gives the user in the service and development area the ability to recognize and find any potential heat problem quickly and accurately. Through the integrated camera, the thermal images can be saved with time and date on the supplied SD card and thus easily documented.
In addition, this unit offers five different color palettes for thermal imaging, and five blend modes for photo to thermal imaging and also a graphical menu navigation.
View detail

Luxmeters - Testo 540

The sensor of the testo 540 is adapted to the spectral sensitivity of the eye. This makes Testo ideal for the measurement of light intensity.
The Hold function allows an easy readout of the measurement values. Max. and min. values are displayed at the press of a button. Luxmeter Testo 540 is very handy, small and easy to operate.
View detail

Luxmeters - Testo 545

The Luxmeter Testo 545 is a light meter, incl. probe, and battery and calibration protocol. In order to have good quality light, luminous intensity in the workplace, hospitals, offices or schools has to fulfill specific minimum guidelines.
View detail

The new thermographic camera Testo 868

Thermography is a non-invasive method that allows the acquisition of temperature values through the emission of infrared rays.
With the thermographic analysis, it is possible to predict that a certain component of a machine may be reaching its end of life and to program a preventive intervention, minimizing unforeseen stops, reducing costs and deadlines in the delivery of the works. However there are several applications where thermography can be used.
The new thermographic camera Testo 868 has the best image of its category and simplifies as much as possible the analysis of buildings and installations.

View detail

Thermal imagers testo 890 - Testo

The thermal imager for the highest demands.
The heart of a thermal imager is the detector. Testo places great value on the highest possible quality.
With the testo 890, you achieve the highest level of image quality thanks to the 640 x 480 pixel detector in combination with high-quality Germanium optics. Because the more measurement points there are in the thermal image, the more details can be recognized and analyzed.

In combination with the Testo SuperResolution technology, the testo 890 records extremely high-resolution thermal images in megapixel quality (1280 x 960 pixels).
This means that even the smallest or very distant measurement objects can be thermographed with an extremely high level of precision.
View detail

Vibration analysis camera - Vshooter VBS1T - Synergys Technologies

The VSHOOTER is a comprehensive diagnostic tool that allows to know and to easily track the status of the more common rotating machines such as fans, pumps, screw compressors and others.

The vibration analyser VSHOOTER VBS1T from Synergys Technologies is much more than an innovation in the field of the vibration meters, it is a totally new concept, a new way to do vibration monitoring and analysis.
View detail

Windmeter - Testo 416

Testo 416, vane anemometer with permanently attached 16 mm telescopic vane (max. 890 mm), with battery and calibration protocol.
The compact Testo 416 anemometer with permanently attached vane probe with telescopic handle (max. 890mm).
Volume flow is shown directly in the display. Accurate volume flow calculation due to easy input of duct area. Timed and multi-point mean calculation provide information on mean volume flow. Min/max values can also be shown in the display. The Hold function enables you to freeze the current reading in the display.
View detail
  • 0
  • 1
By using this website, you agree to the use of cookies for analysis, customized content and ad serving.