This Tuesday Carnival, 21/02, we’re closed! 🎭
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Capacitive temperature humidity CO₂ probe – Jumo
The Jumo capacitive humidity probes have been designed for the most common heating, air-conditioning and ventilation applications. They are particularly distinguished by high measurement accuracy, excellent long-term stability and good chemical resistance.
The modern design allows a low cost of installation and offers the greatest possible protection against pollutants and condensation. These factors, in turn, contribute to smooth and trouble-free continuous use.
The modern design allows a low cost of installation and offers the greatest possible protection against pollutants and condensation. These factors, in turn, contribute to smooth and trouble-free continuous use.
Capacitive temperature humidity probe - Jumo
The Jumo capacitive humidity probes have been designed for the most common heating, air-conditioning and ventilation applications. They are particularly distinguished by high measurement accuracy, excellent long-term stability and good chemical resistance.
The modern design allows a low cost of installation and offers the greatest possible protection against pollutants and condensation. These factors, in turn, contribute to smooth and trouble-free continuous use.
The CO2 measuring probes use infrared technology, proven to measure the concentration of carbon dioxide. The NDIR procedure has a patented automatic calibration function, eliminates the effects of aging and as a result, allows accurate measurement of CO2 values with long term stability.
The modern design allows a low cost of installation and offers the greatest possible protection against pollutants and condensation. These factors, in turn, contribute to smooth and trouble-free continuous use.
The CO2 measuring probes use infrared technology, proven to measure the concentration of carbon dioxide. The NDIR procedure has a patented automatic calibration function, eliminates the effects of aging and as a result, allows accurate measurement of CO2 values with long term stability.
Humidity and temperature transmitter hydroTRANS S30 – JUMO
The JUMO hydroTRANS S30 is a compact humidity and temperature transmitter designed for air duct installations in HVAC and building automation systems.
It provides reliable measurement of relative humidity and air temperature, with optional CO₂ measurement, ensuring precise climate monitoring and control in ventilation and environmental applications.
The transmitter combines robust industrial design, high measurement accuracy, and flexible output interfaces, making it suitable for both standard building services and demanding environments, including railway applications.
It provides reliable measurement of relative humidity and air temperature, with optional CO₂ measurement, ensuring precise climate monitoring and control in ventilation and environmental applications.
The transmitter combines robust industrial design, high measurement accuracy, and flexible output interfaces, making it suitable for both standard building services and demanding environments, including railway applications.
Humidity and temperature transmitter hydroTRANS S40 – JUMO
The JUMO hydroTRANS S40 is a rod-type humidity and temperature transmitter with an optional CO2 module designed for industrial and HVAC applications. The transmitter uses capacitive sensor technology for relative humidity measurement and integrates temperature sensing. The humidity measuring device is available with various interfaces. The robust design is suitable for environments requiring long-term stability and reliable data acquisition.
Humidity and temperature transmitter RHT Climate WM LCD – Novus
RHT Climate is a transmitter that incorporates high precision humidity and temperature sensors, for temperatures from -40 to 100ºC depending on the application.
It can transmit both signals via the two analog outputs or via RS485 Modbus RTU communication. Through the NXperience software, using the USB interface, it is possible to fully configure the transmitter parameters, simulate the temperature and humidity, force the retransmission of signals or even check and diagnose the system.
It can transmit both signals via the two analog outputs or via RS485 Modbus RTU communication. Through the NXperience software, using the USB interface, it is possible to fully configure the transmitter parameters, simulate the temperature and humidity, force the retransmission of signals or even check and diagnose the system.
Industrial oil moisture sensor AFO - Kobold
The AFO oil moisture sensor from Kobold, equipped with two analogue outputs for different measured variables and RS 485 Modbus interface, ensures reliable and long-term stable measurement in technical oils. It is specifically designed to measure moisture content in transformer oil, motor oil, lubricating oil, hydraulic oil, and diesel fuels. In addition to providing highly accurate measurements of water activity (aw) and temperature (t), the AFO also calculates the absolute water content (x) in ppm.
The calculation of water content (x) from the measured values of aw and temperature is oil-specific and requires unique parameters for each type of oil. KOBOLD offers the ability to customize these oil-specific parameters for various oil types. The necessary parameters can either be provided during the AFO order process or later integrated into the device using the Service software.
The calculation of water content (x) from the measured values of aw and temperature is oil-specific and requires unique parameters for each type of oil. KOBOLD offers the ability to customize these oil-specific parameters for various oil types. The necessary parameters can either be provided during the AFO order process or later integrated into the device using the Service software.
Portable humidity and temperature datalogger RHT LCD - Novus
The RHT LCD is a portable humidity and temperature datalogger with built-in sensors. The reliability of its measurements allows it to be used in transport, storage, process auditing applications, among others.
The RHT LCD can be easily programmed and configured through a versatile communication interface connected to the PC's USB port and Windows® environment software. The LogChart II software makes it possible to configure, collect analysis and export the records.
The RHT LCD can be easily programmed and configured through a versatile communication interface connected to the PC's USB port and Windows® environment software. The LogChart II software makes it possible to configure, collect analysis and export the records.
Temperature and humidity transmitter – hydroTRANS S20 – JUMO
The hydroTRANS S20 from JUMO is a compact transmitter with optional CO2 module for the continuous measurement of relative humidity and temperature in industrial and building automation applications. The wall-mounted version is suitable for use in harsh environments such as storage rooms and production facilities. The device converts the measured values into standardized analog output signals, ensuring reliable monitoring and seamless integration into control and automation systems. Innovative Single Pair Ethernet technology enables a direct connection to the JUMO Cloud and other automation systems.
Temperature/humidity transmitter for critical applications testo 6681
Industrial humidity measurement requires absolute professionalism in measuring and control technology. In industrial processes or in research-based business, the testo 6681 temperature and humidity transmitter is ideal wherever critical climatic values need to be maintained.
Precise measuring and control technology will help you to accurately optimize the climatic conditions in your rooms in order to prevent process disruptions and quality losses. Automation systems result in particularly efficient processes. The testo 6681 temperature and humidity transmitter can easily be integrated into individual automation systems because it features Ethernet, relay and analog outputs.
Precise measuring and control technology will help you to accurately optimize the climatic conditions in your rooms in order to prevent process disruptions and quality losses. Automation systems result in particularly efficient processes. The testo 6681 temperature and humidity transmitter can easily be integrated into individual automation systems because it features Ethernet, relay and analog outputs.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1