Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
19” IP Wall Rack Tripartite – Rittal
3-part wall-mounted enclosure with 482.6 mm (19") mounting level and designer glazed door.
The vertically hinged desk unit provides optimum access to the installed components from the front and rear. The wall-mounting part allows cable entry from above or below.
The vertically hinged desk unit provides optimum access to the installed components from the front and rear. The wall-mounting part allows cable entry from above or below.
Assembly frame – Assemblex – Rittal
Despite the high level of automation in the switchgear manufacturing process, there are still some situations which call for manual machining. The ergonomically coordinated assembly frames plus storage and transport trolleys help to create optimised working conditions.
The new assembly frames from Rittal, Assemblex, are a revolutionary tool in the switchgear manufacturing process. The health problems associated with posture and comfort issues in the workplace will be part of the past.
The assembly frames of Rittal are available in 3 different configurations with respect horizontal and vertical adjustment, working height and supported load.
The new assembly frames from Rittal, Assemblex, are a revolutionary tool in the switchgear manufacturing process. The health problems associated with posture and comfort issues in the workplace will be part of the past.
The assembly frames of Rittal are available in 3 different configurations with respect horizontal and vertical adjustment, working height and supported load.
Baying systems TS8 - Rittal
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist - however particular the task in hand.
Every enclosure, with all-round accessibility, is a specialist - however particular the task in hand.
Bus enclosures BG - Rittal
Small enclosures.
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.
With: Fibreglass-reinforced polycarbonate; Cast aluminium; Sheet steel with high-quality coating; Stainless steel. Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.
With: Fibreglass-reinforced polycarbonate; Cast aluminium; Sheet steel with high-quality coating; Stainless steel. Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.
Cast aluminium enclosures GA - Rittal
Small enclosures. This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.
With: Fibreglass-reinforced polycarbonate: Cast aluminium; Sheet steel with high-quality coating; Stainless steel.
Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.
With: Fibreglass-reinforced polycarbonate: Cast aluminium; Sheet steel with high-quality coating; Stainless steel.
Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.
Climate control machine Peltier EPAC – Europeltier
Thermal control with light and robust machines that do not use refrigerant gases. They are efficient for cooling electrical panels and control panels, among others.
Europeltier thermal control machines are light and robust (IP67) and do not use refrigerant gases. They support extreme environments such as air with dust or salt spray, movements, vibrations and inclinations, ambient temperature between -40ᵒ and + 90ᵒ C, sun, snow or rain. The same equipment can cool or heat and are available in AC and 24V DC currents.
Europeltier thermal control machines are light and robust (IP67) and do not use refrigerant gases. They support extreme environments such as air with dust or salt spray, movements, vibrations and inclinations, ambient temperature between -40ᵒ and + 90ᵒ C, sun, snow or rain. The same equipment can cool or heat and are available in AC and 24V DC currents.
Climate control machine Peltier EPDC – Europeltier
Thermal control with light and robust machines that do not use refrigerant gases. They are efficient for cooling electrical panels and control panels, among others.
Europeltier thermal control machines are light and robust (IP67) and do not use refrigerant gases. They support extreme environments such as air with dust or salt spray, movements, vibrations and inclinations, ambient temperature between -40ᵒ and + 90ᵒ C, sun, snow or rain. The same equipment can cool or heat and are available in AC and 24V DC currents.
Europeltier thermal control machines are light and robust (IP67) and do not use refrigerant gases. They support extreme environments such as air with dust or salt spray, movements, vibrations and inclinations, ambient temperature between -40ᵒ and + 90ᵒ C, sun, snow or rain. The same equipment can cool or heat and are available in AC and 24V DC currents.
Control panel and HMI enclosure systems - Teknokol
Industrial computers and operator control panels with HMIs are very important tools for machines and production lines. Teknokol control panels, built in aluminium, are modular and have an ergonomic design.
Teknokol offers two distinct enclosure series: the ECO line and TKP2000 line. The ECO line is based on profiles with depths of 60 (ECO060), 90 (ECO090), 120 (ECO120) and 150 (ECO150) millimetres.
Teknokol offers two distinct enclosure series: the ECO line and TKP2000 line. The ECO line is based on profiles with depths of 60 (ECO060), 90 (ECO090), 120 (ECO120) and 150 (ECO150) millimetres.
Cooling Systems - Climate controlled doors – Rittal
Rittal system climate control for doors offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process control, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions with Rittal, everything is interconnected.
Cooling Systems - Fan-and-filter units– Rittal
Rittal fan-and-filter units are ideal for dissipating high heat loads cost-effectively.
The pre-requisite is that the ambient air must be relatively clean with a temperature below the desired enclosure internal temperature. The entire range of fan-and-filter units is now also available with EMC shielding and all required rated voltages.
The pre-requisite is that the ambient air must be relatively clean with a temperature below the desired enclosure internal temperature. The entire range of fan-and-filter units is now also available with EMC shielding and all required rated voltages.
Cooling Systems - TopTherm-Plus roofmounted cooling units– Rittal
The TopTherm-Plus roofmounted cooling units from Rittal has a flexible performance, only 3 mounting cutouts for 6 different output categories in 28 design variants.
Climate controlled doors.
Targeted air routing in the enclosure.
The internal air circulation is targeted and effective: The heated air is extracted centrally. Air exhaust occurs in the four corners, depending on requirements.
Climate controlled doors.
Targeted air routing in the enclosure.
The internal air circulation is targeted and effective: The heated air is extracted centrally. Air exhaust occurs in the four corners, depending on requirements.
Cooling Systems - TopTherm-Plus wall mounted cooling units– Rittal
The Rittal wall-mounted cooling units are practical and stylish.
The mounting cutout is selected depending on the mounting variant:
external, internal or partial internal mounting. This makes optimum use of the space available.
The mounting cutout is selected depending on the mounting variant:
external, internal or partial internal mounting. This makes optimum use of the space available.
Fan-and-filter units with EC technology – Rittal
Rittal presents the energy-efficient version of the RTT fan-and-filter units with EC technology. From 180 m³/h with integral control interface to regulate and monitor the fan (0-10 V / PWM input and signal output).
Simplify your assembly work and save valuable time by eliminating the use for tools for key tasks: mounting on the enclosure, reversal of the air flow direction, electrical connection and fast filter mat replacement.
The pressure stability of the diagonal fans promises greater energy efficiency and a more constant air throughput – that is even more effective in helping to prevent hot spots.
Simplify your assembly work and save valuable time by eliminating the use for tools for key tasks: mounting on the enclosure, reversal of the air flow direction, electrical connection and fast filter mat replacement.
The pressure stability of the diagonal fans promises greater energy efficiency and a more constant air throughput – that is even more effective in helping to prevent hot spots.
Flat-Boxes for IT - Rittal
Box with flat-pack packaging. For optimized access and versatile use for wall or floor mounting.
Flat-Box's innovative concept combines the reduction of storage and transport costs, with quick assembly, and by a single person without the use of tools.
The possibility of installation as a wall or floor box, as well as free access when installing network components, are just examples of innovation. The 700mm width and depth provide adequate space for wiring distribution.
Flat-Box's innovative concept combines the reduction of storage and transport costs, with quick assembly, and by a single person without the use of tools.
The possibility of installation as a wall or floor box, as well as free access when installing network components, are just examples of innovation. The 700mm width and depth provide adequate space for wiring distribution.
IT rack systems TX CableNet - Rittal
No more cable spaghetti!
This new IT rack from Rittal combines years of experience and expertise in the network infrastructure sector into one extraordinary solution – taking cable management to the next level.
The clearly structured IT rack portfolio, with variants tailored to specific practical applications, provides a rapid overview and makes product selection easier.
The 8 standard variants, each with site-variable cable routing, allow targeted cable management of large numbers of cables, and bring structure and order into IT cabling.
This new IT rack from Rittal combines years of experience and expertise in the network infrastructure sector into one extraordinary solution – taking cable management to the next level.
The clearly structured IT rack portfolio, with variants tailored to specific practical applications, provides a rapid overview and makes product selection easier.
The 8 standard variants, each with site-variable cable routing, allow targeted cable management of large numbers of cables, and bring structure and order into IT cabling.
IT rack Systems VX IT - Rittal
The solution for all network and server applications.
Whether you need a network rack to house a distribution board, or server racks for an edge, colocation or hyperscale data centre, the new VX IT is the ideal platform for accommodating a modern IT infrastructure and its many different requirements. The new VX IT is based on a modular concept with a customer-friendly configurator to guide you quickly and easily to a solution that is tailored to your individual requirements.
Whether you need a network rack to house a distribution board, or server racks for an edge, colocation or hyperscale data centre, the new VX IT is the ideal platform for accommodating a modern IT infrastructure and its many different requirements. The new VX IT is based on a modular concept with a customer-friendly configurator to guide you quickly and easily to a solution that is tailored to your individual requirements.
Luminárias LED – Rittal
The new LED system light is ideal for meeting the new EU requirements.
It is also the first generation of lights developed especially for enclosures, featuring state-of-the-art LED technology.
The new LED system light sets brand new standards in all areas with innovative LED technology for even more light into the very last corner. Intelligent lighting, tailored to the geometry of the enclosure, thanks to a special optical cover with Fresnel structure.
It is also the first generation of lights developed especially for enclosures, featuring state-of-the-art LED technology.
The new LED system light sets brand new standards in all areas with innovative LED technology for even more light into the very last corner. Intelligent lighting, tailored to the geometry of the enclosure, thanks to a special optical cover with Fresnel structure.
Modular enclosure VX25 – Rittal
After a success story with more than 10 million TS8 units produced and after five years of development work, Rittal unveils its new VX25 large enclosure system. The development culminated in the new VX25 large enclosure system. VX25 stands for the versatility of options, the fulfilment of x customer requirements and for perfect symmetry through a consistent 25-mm pitch pattern.
Customer benefit along the entire value chain of control and switchgear manufacturing can be summarised in three key points: maximum data quality and a constant supply of data, reduced complexity and savings in time, as well as safe assembly.
Customer benefit along the entire value chain of control and switchgear manufacturing can be summarised in three key points: maximum data quality and a constant supply of data, reduced complexity and savings in time, as well as safe assembly.
Polycarbonate enclosures PK - Rittal
Small enclosures.
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.
Racks QE BOX - Rittal
Rittal QE Box - Quick and Easy The QE is a single piece welded construction, designed to support networking infrastructure in either satellite offices or small networks.
Supplied with a fully glazed door, which can be hinged from either side. Cable entry is via the top or bottom, with an optional cable brush. Additional cooling can be supplied via additional fan kits and with a removable side service panel you are also able to access the rear without disturbing the mounted equipment.
Supplied with a fully glazed door, which can be hinged from either side. Cable entry is via the top or bottom, with an optional cable brush. Additional cooling can be supplied via additional fan kits and with a removable side service panel you are also able to access the rear without disturbing the mounted equipment.
Sistemas de climatização Blue e+ ar condicionado para montagem na lateral - Rittal
Small and compact enclosures AX/KX - Rittal
In 1961, Rittal was the first company in the world to series-produce enclosures. It all started with the compact enclosure AE, the predecessor of the current AX series. The new compact enclosures AX and small enclosures KX continue on seamlessly from this. The interior installation is largely compatible, which creates completely new engineering and installation synergies.
Small enclosures – E-Box EB – Rittal
For a wide variety of applications, Rittal has created the E-Box EB small enclosure.
This type of wall mounted enclosure already includes the door and mounting plate. Is 180 degrees hinge gives a perfect access to the interior. With depths from 80mm to 155m, widths of 150mm to 300m and heights of 150mm to 800m, the E-Box EB is the ideal solution for small wall mounted applications.
This type of wall mounted enclosure already includes the door and mounting plate. Is 180 degrees hinge gives a perfect access to the interior. With depths from 80mm to 155m, widths of 150mm to 300m and heights of 150mm to 800m, the E-Box EB is the ideal solution for small wall mounted applications.
Support arm systems TK045/TK060/TK120 - Teknokol
Industrial computers and operator control panels with HMIs are very important tools for machines and production lines. Together with control panels, Teknokol suspension support arms systems provide cost efficient, quick lead time, modular assembly and customizable solutions. Teknokol Support arms are designed for loads up to 120kg.
Teknokol offers a diverse selection of components to build support arm systems, always using a modular and easy to customize concept.
Teknokol offers a diverse selection of components to build support arm systems, always using a modular and easy to customize concept.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1