Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Ultrassonic flowmeter with IO-Link DUK - Kobold
Whether in the pharmaceutical industry, water treatment or food production: If non-conductive media flow in a chemical process, ultrasonic flow meters are usually installed for monitoring. For monitoring the measuring devices require short response times and a high degree of calibration freedom, otherwise incorrect metering or insufficient repeat accuracy will occur.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
Ultrassonic level transmitter NUS-7 - Kobold
The NUS-7 is a liquid level transmitter, measuring by the non-contacting ultrassonic principle. Rugged, high performance ultrassonic level measurement transmitter, having transducer and processing electronics incorporated in one single housing.
Variable area flowmeter glass cone UVR/UTR - Kobold
The flow meters and switches model UVR and UTR for liquids and air operate on suspended float principle: that is, the installation position is vertical and the direction of flow is from bottom to top.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
variTRON 300 panel controller - Jumo
The variTRON 300 is the compact central processing unit for automating process systems.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
variTRON 500 panel controller - JUMO
The variTRON 500 from Jumo is a central processing unit for automation systems and is architected upon the modular platform Jumo Jupiter. This central processing unit, in conjunction with the proven input and output modules (including the controller module) of the Jumo mTRON T measuring, control, and automation system, constitutes a comprehensive automation solution and provides a PLC functionality based on CODESYS V3.5.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
Viscosity compensated flow meter VKM – KOBOLD
The KOBOLD flowmeters and switches model VKM have a spring-loaded float, which slides within a cylindrical measuring tube and has an integral orifice which is believed to be unique. This and other design features mean that it has for the first time become possible to create a flowmeter and switch which fully compensates for viscosity and to a large extent for density even with very low flows.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
VORTEX flow meter multivariable - Kobold
Flow with Integrated temperature and pressure measurement
With integrated temperature and pressure sensor, the DVH VORTEX flowmeter can measure mass, and can be used for energy consumption measurements.
With integrated temperature and pressure sensor, the DVH VORTEX flowmeter can measure mass, and can be used for energy consumption measurements.
Wireless pressure transmitter Wtrans p - Jumo
This transmitter is designed for industrial use and is used in conjunction with the Wtrans receiver for fixed or portable pressure measurement in liquids or gases.
The measured values are transmitted wirelessly at 868.4 MHz and viewed on the receiver and available via the RS485 interface in digital format or at analog output with the usual electrical signals. Optionally, alarms associated with 2 output relays can be created in the receiver.
The measured values are transmitted wirelessly at 868.4 MHz and viewed on the receiver and available via the RS485 interface in digital format or at analog output with the usual electrical signals. Optionally, alarms associated with 2 output relays can be created in the receiver.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1