Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Ultrasonic gas meter FLOWSIC500 - Endress+Hauser
The cutting-edge technology for ultimate measurement accuracy: The new FLOWSIC500 ultrasonic compact gas meter from Endress+Hauser enables highly accurate metering in natural gas distribution. In absence of mechanical moving parts, the FLOWSIC500 is a robust, fail-safe and low-maintenance device - allowing for a significant reduction in operating costs. It is overload-proof, accurate and is monitored by an intelligent diagnostics system.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Ultrasonic gas meter FLOWSIC600 - Endress+Hauser
Every day natural gas flows in great quantities through pipelines or into storage facilities, thus changing owners. Precise gas quantity measurement is of the utmost importance, as even very small measurement errors could result in substantial economic loss. In addition, challenging ambient measurement conditions often play a decisive role. Moisture, ice, cold, heat and desert sand place great demands on the instruments in the field. This is why a gas flow meter is needed that is both accurate and reliable.
Ultrasonic gas meter FLOWSIC600-XT - Endress+Hauser
As the follow-up to the successful FLOWSIC600, the FLOWSIC600-XT ultrasonic gas flow measuring device is setting new standards in its market segment.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
Ultrasonic level and open channel flow meter NUS-4 - Kobold
The Kobold ultrasonic level meter, model NUS-4, is used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels. Level measurement technology based on the non-contacting ultrasonic principle is especially suited for applications where, for any reason, no physical contact can be established to the surface of the material to be measured.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Ultrasonic level sensor UP56 – SICK
Tough, non-contact, pressure-resistant.
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids.
Wetted parts can be chosen either as stainless steel or PVDF, thus making the ultrasonic level sensor UP56, da SICK, the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the level sensor UP56 can measure dry running and overflow in one device.
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids.
Wetted parts can be chosen either as stainless steel or PVDF, thus making the ultrasonic level sensor UP56, da SICK, the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the level sensor UP56 can measure dry running and overflow in one device.
Ultrasonic level transmitter AUL730 series - ALIA
The AUL730 series is a fixed mounted ultrasonic level transmitter used for non-invasive measurement. The microprocessor based, user friendly, field programmable level measurement technique, allows no interruption of the process level and has low installation costs.
Ultrasonic portable and stationary flow meter for liquids DUC - Kobold
Clamp-On Ultrasonic Flow Measurement from DN 10 to DN 6000
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
Ultrassonic flowmeter with IO-Link DUK - Kobold
Whether in the pharmaceutical industry, water treatment or food production: If non-conductive media flow in a chemical process, ultrasonic flow meters are usually installed for monitoring. For monitoring the measuring devices require short response times and a high degree of calibration freedom, otherwise incorrect metering or insufficient repeat accuracy will occur.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
Ultrassonic level transmitter NUS-7 - Kobold
The NUS-7 is a liquid level transmitter, measuring by the non-contacting ultrassonic principle. Rugged, high performance ultrassonic level measurement transmitter, having transducer and processing electronics incorporated in one single housing.
Underground pipe locator Combiphon CG50 - Sewerin
Acoustic location of plastic pipes.
Plastic pipes cannot be located by conventional electromagnetic means because they are not electro conductive. A different principle is applied when locating pipes using the acoustic method: The pipes transmit mechanical vibrations better than the earth that surrounds them. When the pipe is caused to vibrate appropriately, these vibrations spread along the pipe to the earth's surface where they can be picked up by a ground microphone. In the same way as water leaks are detected by acoustic means, the pipeline is located where the intensity is greatest. This method can also be used to locate fiber cement pipes and metal pipes.
The COMBIPHON® system consists of the Generator CG50 central control unit and various impulse generators, so it can be used anywhere. Stoppers or tappers are used to generate noises on the line which can then be acoustically detected by the AQUAPHON® or AquaTest T10 systems.
Plastic pipes cannot be located by conventional electromagnetic means because they are not electro conductive. A different principle is applied when locating pipes using the acoustic method: The pipes transmit mechanical vibrations better than the earth that surrounds them. When the pipe is caused to vibrate appropriately, these vibrations spread along the pipe to the earth's surface where they can be picked up by a ground microphone. In the same way as water leaks are detected by acoustic means, the pipeline is located where the intensity is greatest. This method can also be used to locate fiber cement pipes and metal pipes.
The COMBIPHON® system consists of the Generator CG50 central control unit and various impulse generators, so it can be used anywhere. Stoppers or tappers are used to generate noises on the line which can then be acoustically detected by the AQUAPHON® or AquaTest T10 systems.
Universal Dimmer DIM02SA/500U - Qbus
The DIM02SA/500U can dim up to 2 circuits of each 10-500VA and can handle halogen spots, electronic & magnetic transfo's, incandescent lamps, dimmable CFL's and 230V LEDs. The Universal Dimmer DIM02SA/500U from Qbus has an internal protection against short circuits, overload and overheating and has a built-in CRC-filter. This module can also be used Stand-Alone (without Qbus Controller) as it contains 3 inputs to connect standard pushbuttons (including All Off and Panic button).
The DIM02SA/500U module also has 3 potential-free inputs to connect standard push buttons. Input 1 to 2 control respectively output 1 to 2, input 3 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (all outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM02SA/500U can be changed to Normal Open, Normal Closed or toggle.
The DIM02SA/500U module also has 3 potential-free inputs to connect standard push buttons. Input 1 to 2 control respectively output 1 to 2, input 3 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (all outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM02SA/500U can be changed to Normal Open, Normal Closed or toggle.
Universal Dimmer DIM04SA/500U - Qbus
The universal dimmer DIM04SA/500U from Qbus can dim up to 4 circuits of each 10-500VA, and can handle halogen spots, electronic & magnetic transfo's, incandescent lamps, dimmable CFL's and 230V LEDs. The DIM04SA/500U has an internal protection against short circuits, overload and overheating and has a built-in CRC-filter. This module can also be used Stand-Alone (without Qbus Controller) as it contains 5 inputs to connect standard pushbuttons (including All Off and Panic button).
The universal dimmer DIM04SA/500U from Qbus has 5 potencial-free inputs to connect standard push buttons. Input 1 to 4 control respectively output 1 to 4, input 5 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (All outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM04SA/500U can be changed to Normal Open, Normal Closed or toggle.
The universal dimmer DIM04SA/500U from Qbus has 5 potencial-free inputs to connect standard push buttons. Input 1 to 4 control respectively output 1 to 4, input 5 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (All outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM04SA/500U can be changed to Normal Open, Normal Closed or toggle.
Universal pressure sensor PBS - SICK
The SICK pressure switch PBS is designed for pressure monitoring and measurement in liquid and gaseous media.
It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs. In addition, there are configurations available with one or two switching points and an analog output signal.
It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs. In addition, there are configurations available with one or two switching points and an analog output signal.
Universal process calibrator MCS-XV - Presys
MCS-XV is the new Presys advanced multifunction field calibrator and HART® communicator combining multiple software and hardware resources as well as communication features to achieve productivity gains in day-to-day calibration operation.
The MCS-XV operates all instrumentation signals: electrical, temperature, frequency and pressure. Up to four pressure sensors from 250mmH2O to 10,000psi. Optional barometric reference.
The touch screen display provides easy-to-read data and showing 2 simultaneous variables. Intuitive menu navigation helps in identifying calibrator information for any operational mode.
The MCS-XV operates all instrumentation signals: electrical, temperature, frequency and pressure. Up to four pressure sensors from 250mmH2O to 10,000psi. Optional barometric reference.
The touch screen display provides easy-to-read data and showing 2 simultaneous variables. Intuitive menu navigation helps in identifying calibrator information for any operational mode.
UPS Module DR-UPS40 - Mean Well
The Mean Well UPS module and battery controller DR-UPS40 is the ideal solution for the installation of a redundant 24VDC supply system until a maximum of 40A.
In today's market, there is a growing demand for high-performance DIN rail power supplies. Mean Well power supplies stand out, reaching a differentiating level and maintaining high levels of efficiency. But performance by itself may not be enough in an industrial facility. It is sometimes essential to have a redundant supply system. The Mean Well DR-UPS40 solution has the necessary features to add extra power to the already installed power supply in situations where AC power is interrupted.
In today's market, there is a growing demand for high-performance DIN rail power supplies. Mean Well power supplies stand out, reaching a differentiating level and maintaining high levels of efficiency. But performance by itself may not be enough in an industrial facility. It is sometimes essential to have a redundant supply system. The Mean Well DR-UPS40 solution has the necessary features to add extra power to the already installed power supply in situations where AC power is interrupted.
UPS online para montagem em rack série HR11 1 - INVT
The INVT HR11 series is online UPS with the most advanced DSP control technology which can protect the sensitive device from utility fail, over/under voltage, surges, transients, spikes and other electrical abnormalities.
HR11 series, ranging from 1kVA to 10kVA, is double conversion online rack UPS with fully DSP controlled technology. The single phase of 6-10kVA UPS applies the advanced 3-level technology, achieving a efficiency up to 95%. With its compact design of high power density (kW=kVA) in 2U height, HR11 series make it ideal choice for computers, telecommunication equipment and other sensitive devices.
HR11 series, ranging from 1kVA to 10kVA, is double conversion online rack UPS with fully DSP controlled technology. The single phase of 6-10kVA UPS applies the advanced 3-level technology, achieving a efficiency up to 95%. With its compact design of high power density (kW=kVA) in 2U height, HR11 series make it ideal choice for computers, telecommunication equipment and other sensitive devices.
Vacuum gripper EPick – Robotiq
The EPick gripper is a vacuum gripper that generates a vacuum with an electric vacuum pump. No air supply which provide more mobility and flexibility.
Robotiq Vacuum grippers can handle a wide range of applications and are ideal for picking up uneven and even workpieces made of different materials, such as cardboard, glass, sheet metal (dry) and plastic. Because of the customizable bracket and unique air nodes, Robotiq vacuum grippers provide manufacturers full control over their gripper to make sure it’s a perfect fit for their applications.
Robotiq Vacuum grippers can handle a wide range of applications and are ideal for picking up uneven and even workpieces made of different materials, such as cardboard, glass, sheet metal (dry) and plastic. Because of the customizable bracket and unique air nodes, Robotiq vacuum grippers provide manufacturers full control over their gripper to make sure it’s a perfect fit for their applications.
Variable area flowmeter glass cone UVR/UTR - Kobold
The flow meters and switches model UVR and UTR for liquids and air operate on suspended float principle: that is, the installation position is vertical and the direction of flow is from bottom to top.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
variTRON 300 panel controller - Jumo
The variTRON 300 is the compact central processing unit for automating process systems.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
variTRON 500 panel controller - JUMO
The variTRON 500 from Jumo is a central processing unit for automation systems and is architected upon the modular platform Jumo Jupiter. This central processing unit, in conjunction with the proven input and output modules (including the controller module) of the Jumo mTRON T measuring, control, and automation system, constitutes a comprehensive automation solution and provides a PLC functionality based on CODESYS V3.5.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
Vector™ AM7 area monitor - Industrial Scientific
The Vector™ AM7 from Industrial Scientific is designed to streamline area monitoring needs with unparalleled versatility and efficiency, improving situational awareness, site uptime, communications, and multiple aspects of daily operations. Engineered for versatility, the Vector™ AM7’s innovative design enables easier mounting and transportation, making deployment effortless.
In a world where no two sites are identical, adaptability is essential. The Vector™ AM7 is designed to seamlessly integrate with your existing fleet of gas detectors and monitors, forming a unified, mixed fleet. Whether you are currently using the Radius BZ1, Ventis® Pro5, or other connected safety devices, the Vector™ AM7 complements your existing equipment. Additionally, it offers the flexibility to adjust sensor configurations in real-time, thanks to the innovative SafeCore® module.
In a world where no two sites are identical, adaptability is essential. The Vector™ AM7 is designed to seamlessly integrate with your existing fleet of gas detectors and monitors, forming a unified, mixed fleet. Whether you are currently using the Radius BZ1, Ventis® Pro5, or other connected safety devices, the Vector™ AM7 complements your existing equipment. Additionally, it offers the flexibility to adjust sensor configurations in real-time, thanks to the innovative SafeCore® module.
Ventis Pro5 multi-gas monitor – Industrial Scientific
The Ventis Pro5 multi-gas monitor gives you the power to monitor up to five gases simultaneously and manage worker safety anywhere, anytime. Connect workers to live monitoring to instantly receive real-time location data, man-down alarms and gas alerts, so that your team always has help.
Vertical robot type RV-F series - Mitsubishi Electric
The RV-F series presente a highly dynamic 6-axis articulated robot with a high degree of quality and reliability.
The double arm structure not only provides an advantage in terms of freedom of movement, but also more stability and versatility. Depending on the model, the robots are prepared to withstand loads of 2 to 70 kilograms and working distances of 504 to 2055 millimeters. Working in confined spaces, and installed in the wall or ceiling, is no problem for the RV-F series.
The double arm structure not only provides an advantage in terms of freedom of movement, but also more stability and versatility. Depending on the model, the robots are prepared to withstand loads of 2 to 70 kilograms and working distances of 504 to 2055 millimeters. Working in confined spaces, and installed in the wall or ceiling, is no problem for the RV-F series.
Vibration analysis monitoring VSHOOTER®+ - Synergys Technologies
The new unique Auto Vibration Analyzer VSHOOTER+®, from Synergys Technologies, is able to easily and quickly analyze rotating machine like an electrical motor, or a pump, or a fan, or a bearing housing, or a spindle.
Take a photo, do the measurements and get the MCP (Machine Condition Picture) to see the machine condition, if maintenance is needed at a glance. Quick, easy to use, with automatic auto diagnosis system for beginners and experts.
Take a photo, do the measurements and get the MCP (Machine Condition Picture) to see the machine condition, if maintenance is needed at a glance. Quick, easy to use, with automatic auto diagnosis system for beginners and experts.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1