Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
True Presence multisensor Aerosol KNX - STEINEL
For measurably healthy indoor air. The True Presence® Multisensor Aerosol KNX detects human presence and measures light level, room temperature, humidity, air quality, volatile organic compounds (VOC) and CO2.
For the first time, this can be used as the basis for identifying and displaying a potential risk of infection as a communication object for KNX. Result: better health, better safety, better efficiency and better comfort.
For the first time, this can be used as the basis for identifying and displaying a potential risk of infection as a communication object for KNX. Result: better health, better safety, better efficiency and better comfort.
Tunnel analyser - VISIC100SF - Endress+Hauser
The VISIC100SF tunnel analyser is an all-in-one solution for measuring visibility, CO, and NO concentrations. It is the only product of its kind in the world to combine the scattered light measurement principle with electrochemical cells - all in one compact housing.
The VISIC100SF is very easy to mount, operate, and maintain. There is no need for alignment or configuration - so you can start measuring right away. With its IP6K9K enclosure rating, not only is the VISIC100SF able to withstand the harsh ambient conditions inside the tunnel; it can also endure tunnel washing operations without any problems. During the design phase, particular importance was attached to ensuring reliable operation and long maintenance intervals.
The VISIC100SF is very easy to mount, operate, and maintain. There is no need for alignment or configuration - so you can start measuring right away. With its IP6K9K enclosure rating, not only is the VISIC100SF able to withstand the harsh ambient conditions inside the tunnel; it can also endure tunnel washing operations without any problems. During the design phase, particular importance was attached to ensuring reliable operation and long maintenance intervals.
Ultra compact control platform AMAX-5570 - Advantech
AMAX-5570 from Advantech, is specially designed for machine and equipment builders, with efficient Intel Atom® 4 core CPU series processors and optimized local expansion slots for general IT
and OT applications.
The AMAX-5570 from Advantech, controller is equipped with standard PCIe and Dual industrial fieldbus communication interfaces for EtherCAT and CAN bus, so that users can select communication and I/O modules.
and OT applications.
The AMAX-5570 from Advantech, controller is equipped with standard PCIe and Dual industrial fieldbus communication interfaces for EtherCAT and CAN bus, so that users can select communication and I/O modules.
Ultrasonic detector Leakshooter V2+ - Synergys Technologies
Compressed air is a costly form of energy and 20 to 40% of it is lost through leaks, and the systematically checking and leaks elimination can bring considerable energy savings.
When the Leakshooter comes near a leak, a dynamic yellow target appears on the large colour screen and the target turns red and shrinks as it approaches the source of the leak being then possible to photograph and save the precise location of the leak.
When the Leakshooter comes near a leak, a dynamic yellow target appears on the large colour screen and the target turns red and shrinks as it approaches the source of the leak being then possible to photograph and save the precise location of the leak.
Ultrasonic detector Leakshooter V2+ IR - Synergys Technologies
Compressed air is a costly form of energy and 20 to 40% of it is lost through leaks.
Systematically checking for and eliminating leaks can therefore bring considerable energy savings.
When the Leakshooter comes near a leak, a dynamic yellow target appears on the large colour screen and the target turns red and shrinks as it approaches the source of the leak being then possible to photograph and save the precise location of the leak.
Systematically checking for and eliminating leaks can therefore bring considerable energy savings.
When the Leakshooter comes near a leak, a dynamic yellow target appears on the large colour screen and the target turns red and shrinks as it approaches the source of the leak being then possible to photograph and save the precise location of the leak.
Ultrasonic detector Leakshooter V3+ PRO - Synergys Technologies
Compressed air is a costly form of energy and 20% to 40% of it is lost through leaks, the systematically checking and leaks eliminating can therefore bring considerable energy savings.
Leakshooter V3+ PRO from Synergys Technologies is the suitable equipment with camera to detect compressed air, gas and vacuum leak, it uses a camera and a dynamic on screen target to precisely find leak location.
Leakshooter V3+ PRO from Synergys Technologies is the suitable equipment with camera to detect compressed air, gas and vacuum leak, it uses a camera and a dynamic on screen target to precisely find leak location.
Ultrasonic flow measurement instrument FLOWSIC100 - Endress+Hauser
FLOWSIC100 from Endress+Hauser was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
Ultrasonic flow measurement instrument FLOWSIC100 Flare-XT - Endress+Hauser
Detection of flare gas leaks, steam flow measurement, monitoring of gas losses, monitoring of steam injection in flare gas burning as well as process optimization are fields of use for this gas flowmeter FLOWSIC100-Flare-XT from Endress+Hauser. It measures values such as gas velocity, gas volume, mass flow rate, molecular weight, volumetric flow and sound velocity. Additionally, it provides an intelligent device monitoring process and supports predictive maintenance - designed for current and future challenges.
Ultrasonic flowmeter FFU - SICK
Non-contact flow measurement!
The non-contact FFU ultrasonic flowmeter detects the flow volume of conductive and non-conductive liquids. Swimming against the current requires more strength than with the current – this is the simple fact on which ultrasonic flow measurement according to the phase difference process is based.
The non-contact FFU ultrasonic flowmeter detects the flow volume of conductive and non-conductive liquids. Swimming against the current requires more strength than with the current – this is the simple fact on which ultrasonic flow measurement according to the phase difference process is based.
Ultrasonic gas meter FLOWSIC500 - Endress+Hauser
The cutting-edge technology for ultimate measurement accuracy: The new FLOWSIC500 ultrasonic compact gas meter from Endress+Hauser enables highly accurate metering in natural gas distribution. In absence of mechanical moving parts, the FLOWSIC500 is a robust, fail-safe and low-maintenance device - allowing for a significant reduction in operating costs. It is overload-proof, accurate and is monitored by an intelligent diagnostics system.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Ultrasonic gas meter FLOWSIC550 - Endress+Hauser
The FLOWSIC550 ultrasonic gas flowmeter from Endress+Hauser is a compact, high-accuracy flow measurement device designed for custody transfer and distribution measurement of natural gas in high-pressure networks.
Using ultrasonic transit-time difference technology, the device provides reliable measurement of low to medium gas flow rates with high repeatability and integrated diagnostic capabilities.
Using ultrasonic transit-time difference technology, the device provides reliable measurement of low to medium gas flow rates with high repeatability and integrated diagnostic capabilities.
Ultrasonic gas meter FLOWSIC600 - Endress+Hauser
Every day natural gas flows in great quantities through pipelines or into storage facilities, thus changing owners. Precise gas quantity measurement is of the utmost importance, as even very small measurement errors could result in substantial economic loss. In addition, challenging ambient measurement conditions often play a decisive role. Moisture, ice, cold, heat and desert sand place great demands on the instruments in the field. This is why a gas flow meter is needed that is both accurate and reliable.
Ultrasonic gas meter FLOWSIC600-XT - Endress+Hauser
As the follow-up to the successful FLOWSIC600, the FLOWSIC600-XT ultrasonic gas flow measuring device is setting new standards in its market segment.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
Ultrasonic level and open channel flow meter NUS-4 - Kobold
The Kobold ultrasonic level meter, model NUS-4, is used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels. Level measurement technology based on the non-contacting ultrasonic principle is especially suited for applications where, for any reason, no physical contact can be established to the surface of the material to be measured.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Ultrasonic level sensor UP56 – SICK
Tough, non-contact, pressure-resistant.
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids.
Wetted parts can be chosen either as stainless steel or PVDF, thus making the ultrasonic level sensor UP56, da SICK, the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the level sensor UP56 can measure dry running and overflow in one device.
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids.
Wetted parts can be chosen either as stainless steel or PVDF, thus making the ultrasonic level sensor UP56, da SICK, the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the level sensor UP56 can measure dry running and overflow in one device.
Ultrasonic level transmitter AUL730 series - ALIA
The AUL730 series is a fixed mounted ultrasonic level transmitter used for non-invasive measurement. The microprocessor based, user friendly, field programmable level measurement technique, allows no interruption of the process level and has low installation costs.
Ultrasonic portable and stationary flow meter for liquids DUC - Kobold
Clamp-On Ultrasonic Flow Measurement from DN 10 to DN 6000
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
Ultrassonic flowmeter with IO-Link DUK - Kobold
Whether in the pharmaceutical industry, water treatment or food production: If non-conductive media flow in a chemical process, ultrasonic flow meters are usually installed for monitoring. For monitoring the measuring devices require short response times and a high degree of calibration freedom, otherwise incorrect metering or insufficient repeat accuracy will occur.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
Ultrassonic level transmitter NUS-7 - Kobold
The NUS-7 is a liquid level transmitter, measuring by the non-contacting ultrassonic principle. Rugged, high performance ultrassonic level measurement transmitter, having transducer and processing electronics incorporated in one single housing.
Universal Dimmer DIM02SA/500U - Qbus
The DIM02SA/500U can dim up to 2 circuits of each 10-500VA and can handle halogen spots, electronic & magnetic transfo's, incandescent lamps, dimmable CFL's and 230V LEDs. The Universal Dimmer DIM02SA/500U from Qbus has an internal protection against short circuits, overload and overheating and has a built-in CRC-filter. This module can also be used Stand-Alone (without Qbus Controller) as it contains 3 inputs to connect standard pushbuttons (including All Off and Panic button).
The DIM02SA/500U module also has 3 potential-free inputs to connect standard push buttons. Input 1 to 2 control respectively output 1 to 2, input 3 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (all outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM02SA/500U can be changed to Normal Open, Normal Closed or toggle.
The DIM02SA/500U module also has 3 potential-free inputs to connect standard push buttons. Input 1 to 2 control respectively output 1 to 2, input 3 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (all outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM02SA/500U can be changed to Normal Open, Normal Closed or toggle.
Universal Dimmer DIM04SA/500U - Qbus
The universal dimmer DIM04SA/500U from Qbus can dim up to 4 circuits of each 10-500VA, and can handle halogen spots, electronic & magnetic transfo's, incandescent lamps, dimmable CFL's and 230V LEDs. The DIM04SA/500U has an internal protection against short circuits, overload and overheating and has a built-in CRC-filter. This module can also be used Stand-Alone (without Qbus Controller) as it contains 5 inputs to connect standard pushbuttons (including All Off and Panic button).
The universal dimmer DIM04SA/500U from Qbus has 5 potencial-free inputs to connect standard push buttons. Input 1 to 4 control respectively output 1 to 4, input 5 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (All outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM04SA/500U can be changed to Normal Open, Normal Closed or toggle.
The universal dimmer DIM04SA/500U from Qbus has 5 potencial-free inputs to connect standard push buttons. Input 1 to 4 control respectively output 1 to 4, input 5 (A) is a scene input which executes an ALL-OFF-scene when pushing for 0,7 seconds (and then releasing the button), or a panic-scene (All outputs on) when pushing the button for 3 seconds. The inputs are set standard in push button mode. When the module is connected to a controller, the input mode of the DIM04SA/500U can be changed to Normal Open, Normal Closed or toggle.
Universal pressure sensor PBS - SICK
The SICK pressure switch PBS is designed for pressure monitoring and measurement in liquid and gaseous media.
It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs. In addition, there are configurations available with one or two switching points and an analog output signal.
It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs. In addition, there are configurations available with one or two switching points and an analog output signal.
Universal process calibrator MCS-XV - Presys
MCS-XV is the new Presys advanced multifunction field calibrator and HART® communicator combining multiple software and hardware resources as well as communication features to achieve productivity gains in day-to-day calibration operation.
The MCS-XV operates all instrumentation signals: electrical, temperature, frequency and pressure. Up to four pressure sensors from 250mmH2O to 10,000psi. Optional barometric reference.
The touch screen display provides easy-to-read data and showing 2 simultaneous variables. Intuitive menu navigation helps in identifying calibrator information for any operational mode.
The MCS-XV operates all instrumentation signals: electrical, temperature, frequency and pressure. Up to four pressure sensors from 250mmH2O to 10,000psi. Optional barometric reference.
The touch screen display provides easy-to-read data and showing 2 simultaneous variables. Intuitive menu navigation helps in identifying calibrator information for any operational mode.
UPS Module DR-UPS40 - Mean Well
The Mean Well UPS module and battery controller DR-UPS40 is the ideal solution for the installation of a redundant 24VDC supply system until a maximum of 40A.
In today's market, there is a growing demand for high-performance DIN rail power supplies. Mean Well power supplies stand out, reaching a differentiating level and maintaining high levels of efficiency. But performance by itself may not be enough in an industrial facility. It is sometimes essential to have a redundant supply system. The Mean Well DR-UPS40 solution has the necessary features to add extra power to the already installed power supply in situations where AC power is interrupted.
In today's market, there is a growing demand for high-performance DIN rail power supplies. Mean Well power supplies stand out, reaching a differentiating level and maintaining high levels of efficiency. But performance by itself may not be enough in an industrial facility. It is sometimes essential to have a redundant supply system. The Mean Well DR-UPS40 solution has the necessary features to add extra power to the already installed power supply in situations where AC power is interrupted.
Drives
Analytics
Cabling
Pluggable electrical connections
Control
Detection
Gas detection
Energy
Electrical tools
Building management systems
Automatic identification
Lighting and control
Network inspection
Human-machine interface
IoT
Measurement
Process
Electrical cabinets
Industrial networks
Robotics
Machine safety
Temperature
Test, measurement and calibration
Machine vision
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1