Shutter module ROL02P - Qbus

Module for DIN-rail, suitable for switching and positioning 2 shutters / blinds / curtains. The shutter module has 2 up/down outputs (2 shutters can be connected on a ROL02P module). The shutter motors that can be connected to the ROL02P need to be 230Vac motors, with a minimum load of 40VA and a maximum load of 500VA. The shutters also need to have limit contacts, as this will be important for the calibration of the shutters. The ROL02P will not allow mutual signals on UP1(/UP2) and DN1(/DN2) when activating the 2 outputs at the same time.

more details

Downloads

Request Offer

The ROL02P can be positioned between 0% and 100% of the runtime. An internal calibration mechanism calibrates each shutter every time it opens or closes completely – i.e. each time it reaches the top and bottom limit contact. This calibration ensures that the position of the shutter remains accurate over time. Each module has a unique serial number enabling programming anywhere and anytime.
A bipolar automatic fuse of a maximum of 16A must be placed on the mains power.

Features

Power supply : 230Vac +-10%, 50 Hz – maximum protection 16A/2P;
Insulation voltage : 3 kVac tested;
Characteristic consumption : 15VA maximum – all relays on;
Working temp. range : 10°C to 50°C;
Storage temp. range : -10°C to 60°C;
Maximum humidity : 93%, no moisture condensation;
Bus load : 10mA at nominal 13,8V;
Max installation altitude : 2.000 meters.

Advantages