Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
gesis® outdoor RST® series – Wieland Electric
Requiring increased protection of electrical installations from environmental conditions are found everywhere. Experience and competence in designing and installing the electrical system always plays a decisive role, but especially in this area. Difficult installation conditions and increased time pressure often lead to mistakes, loss of the environmental protection, and ultimately to failure of the system.
With just a few basic components, including connectors, panel-mount connectors, distribution units and cable assemblies, complex installations from the distribution panel up to each point of demand can be accomplished. This saves time and costs.
With just a few basic components, including connectors, panel-mount connectors, distribution units and cable assemblies, complex installations from the distribution panel up to each point of demand can be accomplished. This saves time and costs.
gesis® Outdoor RST® SOLAR – Wieland Electric
With the round connector system gesis® IP+, Wieland Electric offers the perfect solution for your photovoltaic system. Whether on the AC side with the product line RST®, or the DC side with the product line PST®, solar systems are installed quickly and without error. The result is clear savings in time and costs.
Pre-assembled components with an increased degree of protection ensure a quick and safe installation even under the most adverse conditions. The system includes distribution panels which are delivered in a pre-assembled design, and cable assemblies for the connection between the inverters and the distribution panels. The system is supplemented by connectors for assembly on site. Leading inverter manufacturers already preassemble their devices in the factory, with the relevant RST® connectors to interface the system.
Pre-assembled components with an increased degree of protection ensure a quick and safe installation even under the most adverse conditions. The system includes distribution panels which are delivered in a pre-assembled design, and cable assemblies for the connection between the inverters and the distribution panels. The system is supplemented by connectors for assembly on site. Leading inverter manufacturers already preassemble their devices in the factory, with the relevant RST® connectors to interface the system.
gesis® Outdoor – RST® MINI series – Wieland Electric
Smallest pluggable installation connector with highest IP rating, optimized for installation in confined spaces.
The new RST® MINI series marks a continuation of the story of the RST® installation system’s success and logically follows the trend towards compact designs. The 2 to 5 pole plug connectors and device connectors have been designed for 250/400V and 16A and are all available in the screw connection technology that electricians trust.
Customized distributors as well as pre-assembled cables round the system off perfectly and offer a huge range of different possible uses, not just in building automation or industry.
The new RST® MINI series marks a continuation of the story of the RST® installation system’s success and logically follows the trend towards compact designs. The 2 to 5 pole plug connectors and device connectors have been designed for 250/400V and 16A and are all available in the screw connection technology that electricians trust.
Customized distributors as well as pre-assembled cables round the system off perfectly and offer a huge range of different possible uses, not just in building automation or industry.
GOT2000 Touchscreen - Mitsubishi Electric
Multi-touch/gestures
Improved user-friendliness, expanded functionalities, high cost-efficiency and optimum integration in Mitsubishi Electric’s Automation portfolio. The successor to the tried and tested GOT1000 HMI range will increase plant productivity and energy efficiency and reduce total operating costs. In particular, the models from the GT27 series which are the successors to the GT16 range are characterized by an intuitive operating concept with multi-touch function and gesture control. The HMIs from the GT23 series offer a balanced price/performance ratio. Mitsubishi Electric is now offering models without a USB connection on the white front panel for the first time in direct response to requirements from the food industry.
Improved user-friendliness, expanded functionalities, high cost-efficiency and optimum integration in Mitsubishi Electric’s Automation portfolio. The successor to the tried and tested GOT1000 HMI range will increase plant productivity and energy efficiency and reduce total operating costs. In particular, the models from the GT27 series which are the successors to the GT16 range are characterized by an intuitive operating concept with multi-touch function and gesture control. The HMIs from the GT23 series offer a balanced price/performance ratio. Mitsubishi Electric is now offering models without a USB connection on the white front panel for the first time in direct response to requirements from the food industry.
GT14 – More than plain visualization – Mitsubishi Electric
GT14 The new standard for 5,7” touch panels from Mitsubishi.
This HMI incorporates advanced features and integrated Ethernet communication, all at a competitive price. The GT14 will answer the needs of a variety of installations and applications.
The GT14 has a display of 5.7" and is available with TFT screen with 65,536 colors and 16 monochrome shades of gray. It has Ethernet port and two serial ports (RS232 and RS485/RS422). Complementing these features, the GT14 has a capacity of memory expansion and data storage via a USB host port and input the SD memory card.
This HMI incorporates advanced features and integrated Ethernet communication, all at a competitive price. The GT14 will answer the needs of a variety of installations and applications.
The GT14 has a display of 5.7" and is available with TFT screen with 65,536 colors and 16 monochrome shades of gray. It has Ethernet port and two serial ports (RS232 and RS485/RS422). Complementing these features, the GT14 has a capacity of memory expansion and data storage via a USB host port and input the SD memory card.
GT16 - Terminal multimedia – Mitsubishi Electric
With a stylish full-flat display, the GT16 series is the leader in the family of Graphic Operation Terminals of Mitsubishi (GOT). Equipped with a variety of communications and multimedia features, the GT16 HMI defines what should be tomorrow.
The GT16 range offer a comprehensive set of resources within a single hardware package. Ideal for all stand-alone or networked solutions, the GT16 easily provides the visualization of machine-level applications, factory and company.
The GT16 range offer a comprehensive set of resources within a single hardware package. Ideal for all stand-alone or networked solutions, the GT16 easily provides the visualization of machine-level applications, factory and company.
Hand-Held Conductivity Measuring Unit HND-C-Kobold
The Kobold hand-held conductivity measuring unit of model HND-C110 is a compact conductivity measuring unit with solidly connected probes that can be used universally. Due to the double display, both, the conductivity and the temperature value can be displayed simultaneously.
The HND-C110 model offers functions like minimum/maximum value memory, hold function, auto-off function, and AutoRange (automatic adjustment of the optimum measuring range). Due to the high temperature dependency in conductivity measurement, the manual measuring unit has automatic temperature compensation. With the improved unit HND-C110, the determination of resistance, salinity, and TDS are also part of the scope of functions.
The HND-C110 model offers functions like minimum/maximum value memory, hold function, auto-off function, and AutoRange (automatic adjustment of the optimum measuring range). Due to the high temperature dependency in conductivity measurement, the manual measuring unit has automatic temperature compensation. With the improved unit HND-C110, the determination of resistance, salinity, and TDS are also part of the scope of functions.
Hand-held pH, redox and temperature measuring units HND-R - Kobold
The Kobold hand-held pH, redox and temperature measuring units of the HND-R106 model are compact and universally applicable measuring units for electrodes with BNC plug connection. An extensive selection of electrodes makes it possible to use the HND-R106 in almost all application areas.
The Kobold HND-R106 measuring unit offers functions like minimum/maximum value memory, hold function, auto off function and automatic temperature compensation. In addition to pH, Redox and temperature measurement, the device can display the relative humidity value. This is calculated from the measured Redox-value and the previously measured or manually entered pH-value.
The Kobold HND-R106 measuring unit offers functions like minimum/maximum value memory, hold function, auto off function and automatic temperature compensation. In addition to pH, Redox and temperature measurement, the device can display the relative humidity value. This is calculated from the measured Redox-value and the previously measured or manually entered pH-value.
Handheld multichannel 260Ex - Additel
Additel's 260Ex is an intrinsically safe handheld multichannel reference recorder with 8 different channel configurations.
Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pressure, temperature (RTD probes available), barometric pressure and electrical measurement all in one highly portable device. The powerful logging capability and high-level of intrinsic safety make the ADT260Ex the perfect companion for use in the pipeline industry by supporting hydrostatic pressure testing, air leak testing, inlet and outlet pressure testing at pump stations, safety valve and ex-proof membrane testing, wellhead pressure testing, pipeline filter testing, differential pressure transmitter/flow computing testing, as well as routine calibration of pressure devices.
Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pressure, temperature (RTD probes available), barometric pressure and electrical measurement all in one highly portable device. The powerful logging capability and high-level of intrinsic safety make the ADT260Ex the perfect companion for use in the pipeline industry by supporting hydrostatic pressure testing, air leak testing, inlet and outlet pressure testing at pump stations, safety valve and ex-proof membrane testing, wellhead pressure testing, pipeline filter testing, differential pressure transmitter/flow computing testing, as well as routine calibration of pressure devices.
Handheld thermography camera BX20 – HIKMICRO
BX20 – The Compact Intrinsically Safe Thermal Camera for Hazardous Areas.
HIKMICRO BX20 is certified to measure temperature in many explosive environments to quickly find invisible faults.
It’s equipped with a 256 x 192 resolution thermal detector and 2MP visual camera. The temperature ranges from - 20°C to 550°C (-4°F to 1022°F), which meets the most situation. It helps the staff to quickly find the fault according to accurate temperature measurements of high-temperature targets in the environment. Meanwhile, it provides assistance in the decision and ensures safety.
HIKMICRO BX20 is certified to measure temperature in many explosive environments to quickly find invisible faults.
It’s equipped with a 256 x 192 resolution thermal detector and 2MP visual camera. The temperature ranges from - 20°C to 550°C (-4°F to 1022°F), which meets the most situation. It helps the staff to quickly find the fault according to accurate temperature measurements of high-temperature targets in the environment. Meanwhile, it provides assistance in the decision and ensures safety.
Handheld thermography camera G61 - HIKMICRO
This HIKMICRO G61 handheld thermal camera is a device with both optical and thermal images. It can measure temperature and distance, record videos, take snapshots, and trigger alarms. The built-in high-sensitivity IR detector and the high-performance sensor detect temperature variation and measure real-time temperature. The built-in laser module detects the target distance. The device is easy to use and adopts an ergonomic design. It is widely applied to substations, electrical problems prevention and detection, and reconnaissance surveys in the construction area.
The G61 high-performance handheld thermal camera is ideal for industrial, predictive, oil and gas, and utility maintenance inspections.
The G61 high-performance handheld thermal camera is ideal for industrial, predictive, oil and gas, and utility maintenance inspections.
Handheld thermography camera M60 - HIKMICRO
Condition-based maintenance with thermal imaging cameras is the key to keep industrial systems working optimally and to minimize the risk of equipment failures or structural damage.
HIKMICRO M60 handheld camera is specially designed for temperature measurement. It’s equipped with a 640 x 480 resolution thermal detector. It helps the staff to quickly find the high-temperature targets in the environment. Meanwhile, it provides assistance with decisions and ensures safety. The device is mainly applied to various industries, such as Building, HVAC, auto industry, etc.
HIKMICRO M60 handheld camera is specially designed for temperature measurement. It’s equipped with a 640 x 480 resolution thermal detector. It helps the staff to quickly find the high-temperature targets in the environment. Meanwhile, it provides assistance with decisions and ensures safety. The device is mainly applied to various industries, such as Building, HVAC, auto industry, etc.
High temperature furnace TA-1200PLAB - Presys
The TA-1200PLAB is a high-temperature, high-volume laboratory furnace. With above-class uniformity and stability, it will dramatically reduce uncertainty in your thermocouple calibrations.
The TA-1200PLAB has 3 control zones. This segmentation makes this furnace a reference in terms of precision and homogeneity. With this control, we have better temperature distribution across the block and thus ensure uniform radial and axial uniformity throughout the 100mm measuring zone.
The TA-1200PLAB has 3 control zones. This segmentation makes this furnace a reference in terms of precision and homogeneity. With this control, we have better temperature distribution across the block and thus ensure uniform radial and axial uniformity throughout the 100mm measuring zone.
High-end 3D camera Ranger3 - SICK
The Ranger3 high-end 3D cameras from SICK are highly accurate and, with an unmatched measurement speed, these streaming cameras can be configured for a wide range of needs. Powered by a unique 3D sensor tailored for demanding vision applications, Ranger3 serves as a key component in inspection systems worldwide. The camera extracts the true 3D shape of an object, regardless of its contrast or color, improving quality for a multitude of products. This next-generation Ranger3 enables even higher speed and RGB high-resolution line scan functionality. Cost-effective integration is guaranteed through GigE Vision and GenICam compliance. Ranger3 offers big 3D performance in a small housing. The new Ranger 3-80 offers not only 3D triangulation and 2D line scanning but also images in color.
High-performance fiber-optic sensor WLL180T - SICK
High-performance fiber-optic sensor with world’s fastest response time!
The WLL180T fiber-optic photoelectric sensor family, from SICK, provides the world’s fastest response time - only 16μs.
In addition, it offers superior sensing distances of up to 20m and its high light intensity delivers a reliable, high-powered solution – even in difficult ambient conditions, like dust, spray, mist, and water jets. Commissioning is simple – either via the external teach-in input or directly on the unit. Two, four-digit displays provide visualization of all programming steps, status displays, plus target and actual values through an intuitive menu structure. The WLL180T sensors can be operated either as a stand-alone or in a bus configuration, depending on the requirements. In a bus configuration, several sensors are networked via an internal bus, enabling the settings on one WLL180T to be copied to all other devices on the bus. Fiber-optic amplifier cross-talk is prevented by the sensors integrated anti-interference logic.
The WLL180T fiber-optic photoelectric sensor family, from SICK, provides the world’s fastest response time - only 16μs.
In addition, it offers superior sensing distances of up to 20m and its high light intensity delivers a reliable, high-powered solution – even in difficult ambient conditions, like dust, spray, mist, and water jets. Commissioning is simple – either via the external teach-in input or directly on the unit. Two, four-digit displays provide visualization of all programming steps, status displays, plus target and actual values through an intuitive menu structure. The WLL180T sensors can be operated either as a stand-alone or in a bus configuration, depending on the requirements. In a bus configuration, several sensors are networked via an internal bus, enabling the settings on one WLL180T to be copied to all other devices on the bus. Fiber-optic amplifier cross-talk is prevented by the sensors integrated anti-interference logic.
High-performance photoelectric sensors W34 - SICK
The W34 photoelectric sensor family from SICK features a durable plastic housing in ABS. All configuration components for the sensor are protected by a durable cover, allowing these sensors to be used in outdoor areas. The housing in die-cast zinc (W24-2) is recommended especially for tough and extreme ambient conditions.
HMI cMT-FHDX-820 - Weintek
In the era of Industrial Internet of Things (IIoT), we can have all the features of an HMI, with connectivity with the top management level, such as SCADAS, MES, ERP with integrated Wireless connection.
This HMI has a compatibility with more than 300 PLC brand protocols on the market, also allows interconnection with IT systems.
This cMT-FHDX-220 integrates an HDMI connection, being able to extend its graphic interface to large screens in Full-HD features, making this equipment compatible to various types of screen resolutions.
This HMI has a compatibility with more than 300 PLC brand protocols on the market, also allows interconnection with IT systems.
This cMT-FHDX-220 integrates an HDMI connection, being able to extend its graphic interface to large screens in Full-HD features, making this equipment compatible to various types of screen resolutions.
HMI MT8050iE – Weintek
With the new MT8050iE, Weintek continues to grow on its range of MT8050iE HMI family.
In response to market demands for the small and compact HMI of the MT8000iE-Series, Weintek has released the newest MT8050iE. Compared to its predecessor, the MT8050iE has more compact design and slimmer enclosure. With 600MHz Cortex A8 CPU and 16M colors display, the MT8050iE shows vivid colors and display real data with faster speed.
In response to market demands for the small and compact HMI of the MT8000iE-Series, Weintek has released the newest MT8050iE. Compared to its predecessor, the MT8050iE has more compact design and slimmer enclosure. With 600MHz Cortex A8 CPU and 16M colors display, the MT8050iE shows vivid colors and display real data with faster speed.
HMI Weincloud Dashboard – Weintek
In the Industrial Internet of Things (IIoT) time, we must need to optimize the intervention times optimizing the times on the reaction in case of faults.
It is essential that HMIs provide vital functionality in order to maximize resources, fundamentally we are talking about remote access on machines.
It is essential that HMIs provide vital functionality in order to maximize resources, fundamentally we are talking about remote access on machines.
HMI Weincloud Easy Access 2.0– Weintek
In the Industrial Internet of Things (IIoT) time, we must need to optimize the intervention times optimizing the times on the reaction in case of faults.
It is essential that HMIs provide vital functionality in order to maximize resources, fundamentally we are talking about remote access on machines.
It is essential that HMIs provide vital functionality in order to maximize resources, fundamentally we are talking about remote access on machines.
HMI without display cMT-SVR-200– Weintek
In the Industrial Internet of Things (IIoT) time, we can have all the functionalities of an HMI, with connectivity to the top management level, such as SCADAS, MES and ERP systems. With Wireless connectivity integrated
The Weintek cMT-SVR-200, has a compatibility with more than 300 protocols of marks of PLCs of the market, also allows the interconnection with the IT systems.
Integrate all the functionalities of a server without display in a single equipment, if we can need to integrate a screen we can use a cMT-iV6* or remote connectivity with a a tablet or a smartphone.
The Weintek cMT-SVR-200, has a compatibility with more than 300 protocols of marks of PLCs of the market, also allows the interconnection with the IT systems.
Integrate all the functionalities of a server without display in a single equipment, if we can need to integrate a screen we can use a cMT-iV6* or remote connectivity with a a tablet or a smartphone.
HMI without display with built-in gateway function cMTG01 and cMTG02 – Weintek
In the Industrial Internet of Things (IIoT) time, we can have all the functionalities of an HMI, with connectivity to the top management level, such as SCADAS, MES and ERP systems. With Wireless connectivity integrated.
This console without display with built-in gateway, has a compatibility with more than 300 protocols of marks of PLCs of the market, also allows the interconnection with the IT systems.
Integrate all the functionalities of a gateway IIoT with OPC UA, MQTT and MODBUS TCP/IP standards by the Ethernet port.
This console without display with built-in gateway, has a compatibility with more than 300 protocols of marks of PLCs of the market, also allows the interconnection with the IT systems.
Integrate all the functionalities of a gateway IIoT with OPC UA, MQTT and MODBUS TCP/IP standards by the Ethernet port.
Hot air tools - STEINEL
STEINEL hot air tools for professionals.
Nothing beats the work of true professionals because they know what matters. Like our hot-melt glue guns, the hot air guns are: powerful and accurate, versatile and robust. We´ve perfected them for use in industry and the trades. There´s nothing more professional.
Nothing beats the work of true professionals because they know what matters. Like our hot-melt glue guns, the hot air guns are: powerful and accurate, versatile and robust. We´ve perfected them for use in industry and the trades. There´s nothing more professional.
Hot-melt glue applicators - STEINEL
Nothing beats the work of true professionals because they know what matters. Like STEINEL hot air guns and hot-melt glue guns: Powerful and accurate, versatile and robust. Steinel perfected them for use in industry and the trades. There´s nothing more professional.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1