Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Flowmeter and counter for liquids and gases BGN - kobold
The Kobold BGN meter is suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit in time.
The Kobold BGN Series variable area flowmeter functions by the fluid flowing from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each position of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flowmeter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the position of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.
The Kobold BGN Series variable area flowmeter functions by the fluid flowing from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each position of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flowmeter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the position of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.
Flowmeter and counter for liquids and gases KDS – Kobold
Your process in your hand.
Whether for gaseous or liquid media, this robust device transmits a float position through a pointer or via an analog output. Through the use of a magnetic tracking system, it performs the monitoring and process control tasks reliably.
Whether for gaseous or liquid media, this robust device transmits a float position through a pointer or via an analog output. Through the use of a magnetic tracking system, it performs the monitoring and process control tasks reliably.
Flowmeter of liquids and gases, viscous and corrosive HPC – Kobold
The HPC flowmeter is unique in the world, as it has a Coriolis measuring tubes revolutionary and innovative design, providing a high dynamic performance, being able to work at higher frequencies without external vibrations interference.
The HPC is precise and resistant, ideal for applications with very low flow, it gives simultaneous measurement of mass flow, density and temperature, also calculating the volume flow.
The HPC is precise and resistant, ideal for applications with very low flow, it gives simultaneous measurement of mass flow, density and temperature, also calculating the volume flow.
Flue gas analyzer portable - testo 340
Flue gas analyzer for use in industry.
Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
Precise technology: That’s what you want to be able to rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer ticks all these boxes.
The testo 340 combustion analyzer. For industrial emission measurements and more.
Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
Precise technology: That’s what you want to be able to rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer ticks all these boxes.
The testo 340 combustion analyzer. For industrial emission measurements and more.
Flue gas analyzer T300 Longlife - Testo
Truly smart flue gas measurement on heating systems with the testo 300 flue gas analyzer. High-quality sensors, intuitive operation with smart-touch technology and smart features, such as efficient documentation and e-mailing of reports, will make your day-to-day work easier.
Fork sensor UFW - SICK
The UFW fork sensor from SICK makes non-contact web edge guiding possible. Thanks to ultrasonic technology, the UFW detects various materials with great precision and is therefore ideally suited for applications with transparent films or light-sensitive materials. The compact housing designs (30 mm and 60 mm fork width) allow space-saving installation. Calibration is simple to perform using a teach-in button. Three LEDs indicate immediately the position of the web material within the fork. Furthermore, the IO-Link communication interface opens numerous possibilities for fine adjustment, analyses, and monitoring.
Fork sensors WF, UF, WFM e WFS - SICK
Simplicity, flexibility, and precision – combined in a single fork sensor.
SICK fork sensors combine senders and receivers in a single housing, meaning that they can be adjusted quickly.
Thanks to the precise, focused light beam and the high detection accuracy, the sensors from SICK also detect very minor light attenuation differences. Many different fork sizes, straightforward mounting, and exceptionally high ambient light immunity are just some of the advantages of these fork sensors.
SICK fork sensors combine senders and receivers in a single housing, meaning that they can be adjusted quickly.
Thanks to the precise, focused light beam and the high detection accuracy, the sensors from SICK also detect very minor light attenuation differences. Many different fork sizes, straightforward mounting, and exceptionally high ambient light immunity are just some of the advantages of these fork sensors.
Fotocélula de segurança quadrada L27 - SICK
Single-beam photoelectric safety switches from SICK offer maximum safety performance. They comprise self-testing senders and receivers or testable senders and receivers combined with na evaluation unit. They have long ranges and come in a variety of types and sizes. They comply with Type 2 and/or Type 4 in acc. with EN 61496, and PL c and/ or PL e in acc. with EN ISO 13849. Applications include robots, processing machinery, machining centers, palletizers.
FR-A800 speed variable drive – Mitsubishi Electric
Maximum performance in both machines and factories!
These ultramodern units were especially developed to be integrated in factories and machines, at maximum performance, where the increase of efficiency and productivity are guaranteed. The FR-A800 variable drives are easily programable and offer numerous communication networks.
These ultramodern units were especially developed to be integrated in factories and machines, at maximum performance, where the increase of efficiency and productivity are guaranteed. The FR-A800 variable drives are easily programable and offer numerous communication networks.
Frequency inverter FR-F800 - Mitsubishi Electric
The FR-F800 inverter from Mitsubishi Electric brings even more reliability, intelligence and cost savings to pumps, fans and compressors.
False alarms and trips to unnecessary maintenance work due to disconnected pumps and fans are increasingly unacceptable as the industry drives for greater efficiency and operational readiness. The new FR-F800 drive provides a smart solution to this emerging need and represents the next generation of speed drives for pumps, fans and compressors.
The intrinsically intelligent FR-F800 inverter, from Mitsubishi Electric, virtually eliminates unnecessary maintenance travel, makes commissioning easier and can achieve 98% energy efficiency. It includes advanced features for specific applications such as waste water processing, compressors and HVAC (hot air ventilation and air conditioning).
False alarms and trips to unnecessary maintenance work due to disconnected pumps and fans are increasingly unacceptable as the industry drives for greater efficiency and operational readiness. The new FR-F800 drive provides a smart solution to this emerging need and represents the next generation of speed drives for pumps, fans and compressors.
The intrinsically intelligent FR-F800 inverter, from Mitsubishi Electric, virtually eliminates unnecessary maintenance travel, makes commissioning easier and can achieve 98% energy efficiency. It includes advanced features for specific applications such as waste water processing, compressors and HVAC (hot air ventilation and air conditioning).
Frequency inverters FR-CS80 - Mitsubishi Electric
FR-CS80 the most compact inverter from Mitsubihsi Electric!
Mitsubishi Electric presents the new ultra-compact FR-CS80 series, which is very easy to install, with high performance, ultra-compact design and extremely competitive.
Mitsubishi's new FR-CS80 drive has now emerged to complement the existing range of inverters. This inverter comes to compete in a more competitive way in the range of compact inverters, offering an excellent performance in a very compact body.
Mitsubishi Electric presents the new ultra-compact FR-CS80 series, which is very easy to install, with high performance, ultra-compact design and extremely competitive.
Mitsubishi's new FR-CS80 drive has now emerged to complement the existing range of inverters. This inverter comes to compete in a more competitive way in the range of compact inverters, offering an excellent performance in a very compact body.
Frequency inverters FR-D700 - Mitsubishi Electric
The micro-drive solution!
Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new Mitsubishi FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives.
Failure safety with self-diagnostics
This inverter actively monitors its own functional safety. If, for example, the fan rpm decreases to 50 %, a pre-alarm is triggered. An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation.
Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new Mitsubishi FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives.
Failure safety with self-diagnostics
This inverter actively monitors its own functional safety. If, for example, the fan rpm decreases to 50 %, a pre-alarm is triggered. An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation.
FTMg flow sensors with energy measurement - SICK
The FTMg energy consumption flow meter measures gas flow and temperature, as well as process pressure and energy consumption, with only one sensor – making it a cost-saving multi-talent.
With high measurement dynamics and reduced pressure loss, it measures non-corrosive gases – such as argon, helium, carbon dioxide and nitrogen – and compressed air with extreme efficiency.
With high measurement dynamics and reduced pressure loss, it measures non-corrosive gases – such as argon, helium, carbon dioxide and nitrogen – and compressed air with extreme efficiency.
Gas analyser PowerCEMS100 - SICK
PowerCEMS100 - High-performance, future-proof CEMS for emission measurement.
The PowerCEMS100 continuous emission monitoring system (CEMS) is an economically and technically perfect solution for extractive measurement tasks. This all-in-one system comprises high-quality standard assemblies and components and can be adapted to the application-specific requirements thanks to its modular system design. Retrofitting analyzer modules or gas conditioners is easy and inexpensive. The innovative PowerCEMS100 system is certified according to European standards EN 15267-1/-3 and EN 14181, and offers future-proof solutions for emission measurement and process applications.
The PowerCEMS100 continuous emission monitoring system (CEMS) is an economically and technically perfect solution for extractive measurement tasks. This all-in-one system comprises high-quality standard assemblies and components and can be adapted to the application-specific requirements thanks to its modular system design. Retrofitting analyzer modules or gas conditioners is easy and inexpensive. The innovative PowerCEMS100 system is certified according to European standards EN 15267-1/-3 and EN 14181, and offers future-proof solutions for emission measurement and process applications.
Gas detection - SePem 100_150 – Sewerin
Noise logger for monitoring water pipe networks: sturdy – convenient – reliable.
Detect water losses early
Leaks in water pipe networks can result in significant water losses. Thanks to systematic monitoring of the network with SePem® data loggers, you can reliably identify existing leaks and catch new ones early on – much faster than with conventional methods.
Detect water losses early
Leaks in water pipe networks can result in significant water losses. Thanks to systematic monitoring of the network with SePem® data loggers, you can reliably identify existing leaks and catch new ones early on – much faster than with conventional methods.
Gas detection service with iNet® Exchange – Industrial Scientific – Industrial Scientific
It can be difficult to know when there is an issue with your monitors and what the issue is. iNet® Exchange is a gas detection service keeps track and replaces your monitor whenever issues arise.
Simplify all aspects of your gas detection program with iNet® Exchange—a subscription service that automatically notifies users that gas monitors need to be evaluated for replacement, before the user even knows there's a problem.
And now you can access service iNet Exchange from within your iNet Control software.
Simplify all aspects of your gas detection program with iNet® Exchange—a subscription service that automatically notifies users that gas monitors need to be evaluated for replacement, before the user even knows there's a problem.
And now you can access service iNet Exchange from within your iNet Control software.
Gas flow analyzer in atmospheric emissions Flowsic100 - SICK
Volume flow measuring devices for continuous emission monitoring.
With diverse volume flow measuring devices SICK provides solutions for a wide variety of measuring tasks - from calculating volume flows in processes, custody transfer applications in natural gas industry, environmental monitoring of plants, on test stands in automotive industry and many others.
The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
With diverse volume flow measuring devices SICK provides solutions for a wide variety of measuring tasks - from calculating volume flows in processes, custody transfer applications in natural gas industry, environmental monitoring of plants, on test stands in automotive industry and many others.
The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
Gas flow analyzer in Flowsic 200 tunnels - SICK
The FLOWSIC200 from SICK is used for the contact-free and accurate measurement of flow velocity and flow direction inside tunnels or exhaust ventilation ducts.
Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
Gas leak detector for indoor installations EX-TEC SNOOPER 4 - Sewerin
Explosion-proof gas leak detector with integrated gas database.
The EX-TEC SNOOPER 4 is a gas leak detector for detecting the smallest leaks in installation lines and at connection points.
The modular device concept allows users to choose either a basic device without a pump (diffusion device) or a device with integrated pump.
The EX-TEC SNOOPER 4 is a gas leak detector for detecting the smallest leaks in installation lines and at connection points.
The modular device concept allows users to choose either a basic device without a pump (diffusion device) or a device with integrated pump.
Gas leak detector – Snooper mini - Sewerin
The SNOOPER mini is a robust gas leak detector and is suitable for checking accessible gas lines for external leak tightness. Leaks are determined based on detection at connection points, e.g. fittings, flanges, threaded connections and gas regulator fittings. The gas concentration is displayed in the ppm range. House lead-ins and concealed gas lines in enclosed spaces at air outlets can also be checked.
SEWERIN's SNOOPER mini is a sturdy gas leak detector for inspecting accessible gas lines. Overall, gas leak detectors have a decisive advantage over the leak detection sprays that are still commonly used, in that they not only indicate the presence of a leak, but also the concentration at the leak site.
SEWERIN's SNOOPER mini is a sturdy gas leak detector for inspecting accessible gas lines. Overall, gas leak detectors have a decisive advantage over the leak detection sprays that are still commonly used, in that they not only indicate the presence of a leak, but also the concentration at the leak site.
Gateway Access Point Anybus® - HMS
Anybus® Access Point expand your Wi-Fi network indoors or outdoors (IP67) connectivity.
Anybus® Access Point from HMS enables you to connect industrial machines and devices to a wireless connectivity at high data rates. Developed for indoor and outdoor industrial settings and with wireless mesh, the Anybus Wireless LAN access points ensure a highly reliable network setup.
With really simple and intuitive configuration tool on na webrowser with your laptop, tablet or smartphone.
The Anybus get all kind of acessories for mouting installation in pole or wall mouning.
Anybus® Access Point from HMS enables you to connect industrial machines and devices to a wireless connectivity at high data rates. Developed for indoor and outdoor industrial settings and with wireless mesh, the Anybus Wireless LAN access points ensure a highly reliable network setup.
With really simple and intuitive configuration tool on na webrowser with your laptop, tablet or smartphone.
The Anybus get all kind of acessories for mouting installation in pole or wall mouning.
Gateway de diagnóstico Cube 67 - Murrelektronik
Gateway for IO-Link SIG200 device integration – SICK
The SIG200 Sensor Integration Gateway is an IO-Link master for integrating IO-Link devices into common PLC environments and enterprise level systems. With the SIG200, digital inputs, digital outputs or IO-Link signals of several devices can be detected, combined, evaluated and transmitted via various fieldbus protocols.
Gateway industrial PC UNO-2271G - Advantech
The World’s Smallest Fanless industrial PC!
Advantech's new generation UNO-2000 series of Embedded Automation Computers are fanless and have a highly ruggedized and embedded operation system. New UNO-2000 series implement Universal, Customized and Domain idea into a modular design concept, which provides flexible and time-to-market support in a variety of applications.
It also includes iDoor technology which supports automation feature-extensions such as Multiple I/O Peripheral, Industrial Fieldbus, Smart I/O Communication and Signal Communication. New UNO-2000 series includes Pocket, Small, and Regular-size Form-Factors, with indicated market segments in terms of different kinds of smart factory application categories, such as Equipment Connectivity (EC), Process Visualization (PV), Environment Management (EM) and Dispatch Management (DM) solution. New compact industrial PC UNO-2271G enables smart factory and fulfils all applications.
Advantech's new generation UNO-2000 series of Embedded Automation Computers are fanless and have a highly ruggedized and embedded operation system. New UNO-2000 series implement Universal, Customized and Domain idea into a modular design concept, which provides flexible and time-to-market support in a variety of applications.
It also includes iDoor technology which supports automation feature-extensions such as Multiple I/O Peripheral, Industrial Fieldbus, Smart I/O Communication and Signal Communication. New UNO-2000 series includes Pocket, Small, and Regular-size Form-Factors, with indicated market segments in terms of different kinds of smart factory application categories, such as Equipment Connectivity (EC), Process Visualization (PV), Environment Management (EM) and Dispatch Management (DM) solution. New compact industrial PC UNO-2271G enables smart factory and fulfils all applications.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1