Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Thyristor power switch - TYA 432 - Jumo
Thyristor power switches are required for contactless switching of alternating current consumers.
A typical application is the switching of ohmic-inductive loads at a high switching frequency.
Jumo presents an improved series of semiconductor contactors with a new look and compact design type, it is specially designed for use in smaller control cabinets.
This product applies especially to the industrial sector in areas such as the plastic packaging industry, air conditioning and heat technology and industrial furnace construction.
The control and power sections are galvanically isolated by optocouplers. The control signal area is compatible with the logic outputs of the JUMO controllers.
The input status is indicated by a green LED.
A typical application is the switching of ohmic-inductive loads at a high switching frequency.
Jumo presents an improved series of semiconductor contactors with a new look and compact design type, it is specially designed for use in smaller control cabinets.
This product applies especially to the industrial sector in areas such as the plastic packaging industry, air conditioning and heat technology and industrial furnace construction.
The control and power sections are galvanically isolated by optocouplers. The control signal area is compatible with the logic outputs of the JUMO controllers.
The input status is indicated by a green LED.
Titanium Level Probe MAERA S29 SW - Jumo
This latest innovation is especially sturdy and durable as it is designed primarily for use in salt water or water that contains chloride in maritime applications or in swimming pool technology. The device is also designed for potentially explosive areas.
The chemically high-resistant titanium design and the intrinsically safe ATEX approval allow the probe to be used in difficult environmental conditions.
The level probe has a medium-separated, piezo-resistive measuring system with front-flush membrane. It stands out due to its optimum moisture and vibration protection.
The chemically high-resistant titanium design and the intrinsically safe ATEX approval allow the probe to be used in difficult environmental conditions.
The level probe has a medium-separated, piezo-resistive measuring system with front-flush membrane. It stands out due to its optimum moisture and vibration protection.
Ultrasonic gas meter FLOWSIC500 - Endress+Hauser
The cutting-edge technology for ultimate measurement accuracy: The new FLOWSIC500 ultrasonic compact gas meter from Endress+Hauser enables highly accurate metering in natural gas distribution. In absence of mechanical moving parts, the FLOWSIC500 is a robust, fail-safe and low-maintenance device - allowing for a significant reduction in operating costs. It is overload-proof, accurate and is monitored by an intelligent diagnostics system.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Ultrasonic gas meter FLOWSIC600 - Endress+Hauser
Every day natural gas flows in great quantities through pipelines or into storage facilities, thus changing owners. Precise gas quantity measurement is of the utmost importance, as even very small measurement errors could result in substantial economic loss. In addition, challenging ambient measurement conditions often play a decisive role. Moisture, ice, cold, heat and desert sand place great demands on the instruments in the field. This is why a gas flow meter is needed that is both accurate and reliable.
Ultrasonic gas meter FLOWSIC600-XT - Endress+Hauser
As the follow-up to the successful FLOWSIC600, the FLOWSIC600-XT ultrasonic gas flow measuring device is setting new standards in its market segment.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
Ultrasonic level and open channel flow meter NUS-4 - Kobold
The Kobold ultrasonic level meter, model NUS-4, is used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels. Level measurement technology based on the non-contacting ultrasonic principle is especially suited for applications where, for any reason, no physical contact can be established to the surface of the material to be measured.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Ultrasonic level sensor UP56 – SICK
Tough, non-contact, pressure-resistant.
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids.
Wetted parts can be chosen either as stainless steel or PVDF, thus making the ultrasonic level sensor UP56, da SICK, the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the level sensor UP56 can measure dry running and overflow in one device.
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids.
Wetted parts can be chosen either as stainless steel or PVDF, thus making the ultrasonic level sensor UP56, da SICK, the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the level sensor UP56 can measure dry running and overflow in one device.
Ultrasonic level transmitter AUL730 series - ALIA
The AUL730 series is a fixed mounted ultrasonic level transmitter used for non-invasive measurement. The microprocessor based, user friendly, field programmable level measurement technique, allows no interruption of the process level and has low installation costs.
Ultrasonic portable and stationary flow meter for liquids DUC - Kobold
Clamp-On Ultrasonic Flow Measurement from DN 10 to DN 6000
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
Ultrassonic flowmeter with IO-Link DUK - Kobold
Whether in the pharmaceutical industry, water treatment or food production: If non-conductive media flow in a chemical process, ultrasonic flow meters are usually installed for monitoring. For monitoring the measuring devices require short response times and a high degree of calibration freedom, otherwise incorrect metering or insufficient repeat accuracy will occur.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
Ultrassonic level transmitter NUS-7 - Kobold
The NUS-7 is a liquid level transmitter, measuring by the non-contacting ultrassonic principle. Rugged, high performance ultrassonic level measurement transmitter, having transducer and processing electronics incorporated in one single housing.
Variable area flowmeter glass cone UVR/UTR - Kobold
The flow meters and switches model UVR and UTR for liquids and air operate on suspended float principle: that is, the installation position is vertical and the direction of flow is from bottom to top.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
variTRON 300 panel controller - Jumo
The variTRON 300 is the compact central processing unit for automating process systems.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
variTRON 500 panel controller - JUMO
The variTRON 500 from Jumo is a central processing unit for automation systems and is architected upon the modular platform Jumo Jupiter. This central processing unit, in conjunction with the proven input and output modules (including the controller module) of the Jumo mTRON T measuring, control, and automation system, constitutes a comprehensive automation solution and provides a PLC functionality based on CODESYS V3.5.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
Viscosity compensated flow meter VKM – KOBOLD
The KOBOLD flowmeters and switches model VKM have a spring-loaded float, which slides within a cylindrical measuring tube and has an integral orifice which is believed to be unique. This and other design features mean that it has for the first time become possible to create a flowmeter and switch which fully compensates for viscosity and to a large extent for density even with very low flows.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
VORTEX flow meter multivariable - Kobold
Flow with Integrated temperature and pressure measurement
With integrated temperature and pressure sensor, the DVH VORTEX flowmeter can measure mass, and can be used for energy consumption measurements.
With integrated temperature and pressure sensor, the DVH VORTEX flowmeter can measure mass, and can be used for energy consumption measurements.
Wireless pressure transmitter Wtrans p - Jumo
This transmitter is designed for industrial use and is used in conjunction with the Wtrans receiver for fixed or portable pressure measurement in liquids or gases.
The measured values are transmitted wirelessly at 868.4 MHz and viewed on the receiver and available via the RS485 interface in digital format or at analog output with the usual electrical signals. Optionally, alarms associated with 2 output relays can be created in the receiver.
The measured values are transmitted wirelessly at 868.4 MHz and viewed on the receiver and available via the RS485 interface in digital format or at analog output with the usual electrical signals. Optionally, alarms associated with 2 output relays can be created in the receiver.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1