Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Recorder Logoscreen 700 - Jumo
The Logoscreen 700 is the new highly scalable Jumo process recorder.
The Jumo Logoscreen 700 paperless recorder features an intuitive icon-based operation and visualization concept that makes operation easier. Several versions of Jumo Logoscreen 700 are available for process data recording. The high level of scalability allows a flexible adaptation to the various customer requirements: from the logger version without input (120 process values via interface) to different versions of registers with up to 18 universal analogue inputs, 3 analogue outputs, 18 digital inputs, 24 individually selectable digital inputs/outputs and 7 relay outputs. The FDA compliant data recording version meets all requirements in accordance with 21 CFR Part 11.
The Jumo Logoscreen 700 paperless recorder features an intuitive icon-based operation and visualization concept that makes operation easier. Several versions of Jumo Logoscreen 700 are available for process data recording. The high level of scalability allows a flexible adaptation to the various customer requirements: from the logger version without input (120 process values via interface) to different versions of registers with up to 18 universal analogue inputs, 3 analogue outputs, 18 digital inputs, 24 individually selectable digital inputs/outputs and 7 relay outputs. The FDA compliant data recording version meets all requirements in accordance with 21 CFR Part 11.
Rotating vane level monitor NIR-9 - Kobold
The NIR-9 level monitor is suitable for wide applications for bulks and solids in silos and hoppers. Regardless of humidity and conductivity of the product, the maximum or minimum level is controlled reliably.
A motor drives a rotating vane that is extended into the tank by means of a shaft. As soon as the bulk reaches the rotating vane, it’s rotation is blocked. Hereby, a microswitch is actuated, wich gives out an alarm signal and a second microswitch turns off the motor. If the filling level decreases, the rotating vane is released again and the force of a spring pulls the motor back to its original position.
A motor drives a rotating vane that is extended into the tank by means of a shaft. As soon as the bulk reaches the rotating vane, it’s rotation is blocked. Hereby, a microswitch is actuated, wich gives out an alarm signal and a second microswitch turns off the motor. If the filling level decreases, the rotating vane is released again and the force of a spring pulls the motor back to its original position.
Sight glass flow indicator DAI - Kobold
Flow indicator for the observation of flowing media.
The new DAI flow indicator is suitable for horizontal and vertical installation. It is available in metal or plastic types matching process connections from DN 15 to DN 200. The plastic versions with sight glasses made of borosilicate glass withstand temperatures of up to +260 °C.
The new DAI flow indicator is suitable for horizontal and vertical installation. It is available in metal or plastic types matching process connections from DN 15 to DN 200. The plastic versions with sight glasses made of borosilicate glass withstand temperatures of up to +260 °C.
Single-Phase thyristor power controller TYA-201 - Jumo
Jumo’s TYA 201 is a single-phase power controller for the control of resistive and inductive loads.
The Jumo TYA 201 represents the consistent development of power control technology.
All parameters of the control microprocessor are visible on the LCD display and can be accessed via the 4 front keys. TYA 201 thyristors for load currents up to 32A can be DIN rail mounted or wall mounted with appropriate mounting plate. Depending on the configuration in the program, the power controller thyristors operate in phase angle mode, with adjustable current limitation or in burst mode.
The Jumo TYA 201 represents the consistent development of power control technology.
All parameters of the control microprocessor are visible on the LCD display and can be accessed via the 4 front keys. TYA 201 thyristors for load currents up to 32A can be DIN rail mounted or wall mounted with appropriate mounting plate. Depending on the configuration in the program, the power controller thyristors operate in phase angle mode, with adjustable current limitation or in burst mode.
SZM Bypass level indicator - Kobold
As an indicator of levels in small and medium-sized, upright or horizontal, round vessels, the SZM is particularly recommended for use in the food industry, water treatment and the pharmaceutical and chemical industries.
The SZM type glass tube level indicator is applicable for the indication of liquid level in small and middle-sized, standing or lying round containers used in food, pharmaceutical and chemical industries. The loads occurring at the installation are absorbed by the outer armature, thus the glass tube is protected against breaking.
The SZM type glass tube level indicator is applicable for the indication of liquid level in small and middle-sized, standing or lying round containers used in food, pharmaceutical and chemical industries. The loads occurring at the installation are absorbed by the outer armature, thus the glass tube is protected against breaking.
Temperature and pressure sensors with IO-Link – Jumo
The long stopping times belong to the past. The new JUMO temperature and pressure sensors with IO-Link use the integrated diagnostic function to better plan the availability or exchange of sensors.
Flexibility, production process optimization and remote maintenance are important performance parameters for machines or manufacturing facilities. The sensors with IO-Link give the operator access to the most basic field level. The effort to recover information, parameterization and diagnosis of the sensors is minimal, so that the evaluation of the conditions of the equipment is ideal.
The efficient IO-Link point-to-point communication is based on the well-known three-wire sensor connection. The IO-Link is a serial and bidirectional point-to-point connection for signal transmission and power supply in any number of networks, field or support.
Flexibility, production process optimization and remote maintenance are important performance parameters for machines or manufacturing facilities. The sensors with IO-Link give the operator access to the most basic field level. The effort to recover information, parameterization and diagnosis of the sensors is minimal, so that the evaluation of the conditions of the equipment is ideal.
The efficient IO-Link point-to-point communication is based on the well-known three-wire sensor connection. The IO-Link is a serial and bidirectional point-to-point connection for signal transmission and power supply in any number of networks, field or support.
Temperature controller N1030 – Novus
N1030 is the most compact temperature controller in the market.
Easy to install and configure, the N1030 fits perfectly into the most distinct panels, including small ones. It can be configured to accept thermocouples type J, K and T, and also Pt100.
Easy to install and configure, the N1030 fits perfectly into the most distinct panels, including small ones. It can be configured to accept thermocouples type J, K and T, and also Pt100.
Temperature/humidity transmitter for critical applications testo 6681
Industrial humidity measurement requires absolute professionalism in measuring and control technology. In industrial processes or in research-based business, the testo 6681 temperature and humidity transmitter is ideal wherever critical climatic values need to be maintained.
Precise measuring and control technology will help you to accurately optimize the climatic conditions in your rooms in order to prevent process disruptions and quality losses. Automation systems result in particularly efficient processes. The testo 6681 temperature and humidity transmitter can easily be integrated into individual automation systems because it features Ethernet, relay and analog outputs.
Precise measuring and control technology will help you to accurately optimize the climatic conditions in your rooms in order to prevent process disruptions and quality losses. Automation systems result in particularly efficient processes. The testo 6681 temperature and humidity transmitter can easily be integrated into individual automation systems because it features Ethernet, relay and analog outputs.
Thermal energy flowmeter for gas KEC - Kobold
The new flow sensors KEC work according to the calorimetric measuring principle. Therefore an additional temperature and pressure compensation is not necessary. Due to its robust design, the aluminium die cast housing, the robust sensor tip made from stainless steel 1.4571, new KEC are suitable for demanding industrial applications. Contrary to the previously used bridge circuit, the newly developed evaluation electronics records all measured values digitally. This allows very precise and fast measurements with a wide temperature range of up to 180 °C. The measuring span is 1... 1000 and enables therefore measurements in very low as well as very high flow speeds of up to 224 m/s.
Three-Phase thyristor power controller TYA 203 - Jumo
The Jumo TYA 203 is the result of consistent development of Jumo power controller technology and switches resistive and resistive/inductive loads (transformer) via a three-wire circuit.
The TYA 203 enables the wiring of the load in a star connection (with and without N conductor) or a delta connection. An open delta connection (six-conductor connection) can also be implemented. The microprocessor controlled power controller displays all parameters in an LCD display with background lighting and it can be operated using the 4 keys at the front.
Thyristor power controllers are used where larger resistive and ohmic-inductive loads have to be switched (e.g. in industrial furnace construction and plastics processing). The thyristor power controller with a load current of 20 A can either be clipped to a 35 mm mounting rail or fitted to the wall on a mounting plate. Devices with a load current greater than 20 A can only be mounted on the wall.
The TYA 203 enables the wiring of the load in a star connection (with and without N conductor) or a delta connection. An open delta connection (six-conductor connection) can also be implemented. The microprocessor controlled power controller displays all parameters in an LCD display with background lighting and it can be operated using the 4 keys at the front.
Thyristor power controllers are used where larger resistive and ohmic-inductive loads have to be switched (e.g. in industrial furnace construction and plastics processing). The thyristor power controller with a load current of 20 A can either be clipped to a 35 mm mounting rail or fitted to the wall on a mounting plate. Devices with a load current greater than 20 A can only be mounted on the wall.
Thyristor power switch - TYA 432 - Jumo
Thyristor power switches are required for contactless switching of alternating current consumers.
A typical application is the switching of ohmic-inductive loads at a high switching frequency.
Jumo presents an improved series of semiconductor contactors with a new look and compact design type, it is specially designed for use in smaller control cabinets.
This product applies especially to the industrial sector in areas such as the plastic packaging industry, air conditioning and heat technology and industrial furnace construction.
The control and power sections are galvanically isolated by optocouplers. The control signal area is compatible with the logic outputs of the JUMO controllers.
The input status is indicated by a green LED.
A typical application is the switching of ohmic-inductive loads at a high switching frequency.
Jumo presents an improved series of semiconductor contactors with a new look and compact design type, it is specially designed for use in smaller control cabinets.
This product applies especially to the industrial sector in areas such as the plastic packaging industry, air conditioning and heat technology and industrial furnace construction.
The control and power sections are galvanically isolated by optocouplers. The control signal area is compatible with the logic outputs of the JUMO controllers.
The input status is indicated by a green LED.
Titanium Level Probe MAERA S29 SW - Jumo
This latest innovation is especially sturdy and durable as it is designed primarily for use in salt water or water that contains chloride in maritime applications or in swimming pool technology. The device is also designed for potentially explosive areas.
The chemically high-resistant titanium design and the intrinsically safe ATEX approval allow the probe to be used in difficult environmental conditions.
The level probe has a medium-separated, piezo-resistive measuring system with front-flush membrane. It stands out due to its optimum moisture and vibration protection.
The chemically high-resistant titanium design and the intrinsically safe ATEX approval allow the probe to be used in difficult environmental conditions.
The level probe has a medium-separated, piezo-resistive measuring system with front-flush membrane. It stands out due to its optimum moisture and vibration protection.
Ultrasonic gas meter FLOWSIC500 - SICK
The cutting-edge technology for ultimate measurement accuracy: The new FLOWSIC500 ultrasonic compact gas meter from Sick enables highly accurate metering in natural gas distribution. In absence of mechanical moving parts, the FLOWSIC500 is a robust, fail-safe and low-maintenance device - allowing for a significant reduction in operating costs. It is overload-proof, accurate and is monitored by an intelligent diagnostics system.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Ultrasonic gas meter FLOWSIC600 – SICK
Every day natural gas flows in great quantities through pipelines or into storage facilities, thus changing owners. Precise gas quantity measurement is of the utmost importance, as even very small measurement errors could result in substantial economic loss. In addition, challenging ambient measurement conditions often play a decisive role. Moisture, ice, cold, heat and desert sand place great demands on the instruments in the field. This is why a gas flow meter is needed that is both accurate and reliable.
Ultrasonic gas meter FLOWSIC600-XT – SICK
As the follow-up to the successful FLOWSIC600, the FLOWSIC600-XT ultrasonic gas flow measuring device is setting new standards in its market segment.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
Ultrasonic level and open channel flow meter NUS-4 - Kobold
The Kobold ultrasonic level meter, model NUS-4, is used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels. Level measurement technology based on the non-contacting ultrasonic principle is especially suited for applications where, for any reason, no physical contact can be established to the surface of the material to be measured.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
Ultrasonic level transmitter AUL730 series - ALIA
The AUL730 series is a fixed mounted ultrasonic level transmitter used for non-invasive measurement. The microprocessor based, user friendly, field programmable level measurement technique, allows no interruption of the process level and has low installation costs.
Ultrasonic portable and stationary flow meter for liquids DUC - Kobold
Clamp-On Ultrasonic Flow Measurement from DN 10 to DN 6000
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
Ultrassonic flowmeter with IO-Link DUK - Kobold
Whether in the pharmaceutical industry, water treatment or food production: If non-conductive media flow in a chemical process, ultrasonic flow meters are usually installed for monitoring. For monitoring the measuring devices require short response times and a high degree of calibration freedom, otherwise incorrect metering or insufficient repeat accuracy will occur.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
Ultrassonic level transmitter NUS-7 - Kobold
The NUS-7 is a liquid level transmitter, measuring by the non-contacting ultrassonic principle. Rugged, high performance ultrassonic level measurement transmitter, having transducer and processing electronics incorporated in one single housing.
Variable area flowmeter glass cone UVR/UTR - Kobold
The flow meters and switches model UVR and UTR for liquids and air operate on suspended float principle: that is, the installation position is vertical and the direction of flow is from bottom to top.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
variTRON 300 panel controller - Jumo
The variTRON 300 is the compact central processing unit for automating process systems.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
The basis for the development of this central processing unit was the new platform with a 792 MHz (single core) processor.
Given the scalability of hardware and software, we have available a modular, flexible and, above all, sustainable hardware platform, combined with a modern software architecture.
variTRON 500 panel controller - JUMO
The variTRON 500 from Jumo is a central processing unit for automation systems and is architected upon the modular platform Jumo Jupiter. This central processing unit, in conjunction with the proven input and output modules (including the controller module) of the Jumo mTRON T measuring, control, and automation system, constitutes a comprehensive automation solution and provides a PLC functionality based on CODESYS V3.5.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
The variTRON 500 incorporates a new hardware platform featuring an 800 MHz processor in a quad-core configuration, offering hardware and software scalability, resulting in a modular, flexible, and sustainable hardware platform integrated with a modern software architecture. Based on this new platform, innovative operating concepts can now be implemented using state-of-the-art display technologies.
Viscosity compensated flow meter VKM – KOBOLD
The KOBOLD flowmeters and switches model VKM have a spring-loaded float, which slides within a cylindrical measuring tube and has an integral orifice which is believed to be unique. This and other design features mean that it has for the first time become possible to create a flowmeter and switch which fully compensates for viscosity and to a large extent for density even with very low flows.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1