Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Stand-Alone Relay Module REL04SA - Qbus
This module with 4 outputs and 5 inputs is the base of the Qbus Stand-Alone range and functions both autonomously - so without controller, without external power supply and without any configuration - but can also be connected to a controller to become part of a full-fleged Qbus installation.
Input 1 to 4 control respectively output 1 to 4. Input 5 (A) is a scene-input which executes an ALL off scene when pushing for 0,7 seconds, or a panic scene, all outputs on when pushing the button for 3 seconds.
Input 1 to 4 control respectively output 1 to 4. Input 5 (A) is a scene-input which executes an ALL off scene when pushing for 0,7 seconds, or a panic scene, all outputs on when pushing the button for 3 seconds.
Support arm systems TK045/TK060/TK120 - Teknokol
Industrial computers and operator control panels with HMIs are very important tools for machines and production lines. Together with control panels, Teknokol suspension support arms systems provide cost efficient, quick lead time, modular assembly and customizable solutions. Teknokol Support arms are designed for loads up to 120kg.
Teknokol offers a diverse selection of components to build support arm systems, always using a modular and easy to customize concept.
Teknokol offers a diverse selection of components to build support arm systems, always using a modular and easy to customize concept.
Support arm systems – CP 40/60/120/180 – Rittal
From different lines of sight to the machine to smaller or taller operators working from a seated or standing position – with the support arm systems from Rittal, the interaction between observing and controlling has never been better.
The Rittal support arm systems are available in 4 cross-sections for different load capacities. With a sleek and functional design, they offer a high degree of stability for all load levels up to 180Kg. The many modular components allow different possibilities for the configuration of the support arm system and the design of solutions adapted to each need.
The Rittal support arm systems are available in 4 cross-sections for different load capacities. With a sleek and functional design, they offer a high degree of stability for all load levels up to 180Kg. The many modular components allow different possibilities for the configuration of the support arm system and the design of solutions adapted to each need.
Switch Gigabit XELITY 10 TX IP67 - Murrelektronik
Decentralized networking made easy!
The Xelity 10 TX IP67 switch from Murrelektronik opens up smart, decentralized data
management for IIoT. With the IP67 rated Xelity 10 TX managed switch, fail-safe networks
can be implemented under the most difficult conditions in the most diverse application
scenarios – including fast data flow rates of up to 10 x Gigabit in one switch. The biggest
benefit is the availability of 10 ports in an enormously small, but very robust, metal
housing.
The Xelity 10 TX IP67 switch from Murrelektronik opens up smart, decentralized data
management for IIoT. With the IP67 rated Xelity 10 TX managed switch, fail-safe networks
can be implemented under the most difficult conditions in the most diverse application
scenarios – including fast data flow rates of up to 10 x Gigabit in one switch. The biggest
benefit is the availability of 10 ports in an enormously small, but very robust, metal
housing.
Switching automation light grids - SICK
Switching light grids from SICK for a variety of applications.
Switching light grids from SICK are equipped with various technologies and can be used in a variety of applications: the detection and counting of irregular objects, presence and protrusion monitoring, and all this in very different installation situations or environmental conditions. Whether the application requires small beam separations, high ambient light immunity, large ranges, varying monitoring heights or very thin housing dimensions, the switching light grids will meet your requirements.
Switching light grids from SICK are equipped with various technologies and can be used in a variety of applications: the detection and counting of irregular objects, presence and protrusion monitoring, and all this in very different installation situations or environmental conditions. Whether the application requires small beam separations, high ambient light immunity, large ranges, varying monitoring heights or very thin housing dimensions, the switching light grids will meet your requirements.
Switching automation light grids FlexChain - SICK
The flexible and efficient detection system in one chain.
The FlexChain is a flexibly configurable light grid thanks to the sequential connection of several sensors. There is no need for long connection cables or complex wiring.
By pressing a button on the FlexChain Host, the sensors can be addressed and taught-in automatically, meaning the system is immediately ready for use. Different sensor technologies can be combined and freely arranged: Through-beam photoelectric sensors, photoelectric sensors. The raw sensor data is evaluated via the FlexChain Host with integrated logic modules or forwarded directly via IO-Link, CANopen, RS-485 or I/O signals. Detailed diagnostic information ensures optimum process stability and measurement certainty during operation.
The FlexChain is a flexibly configurable light grid thanks to the sequential connection of several sensors. There is no need for long connection cables or complex wiring.
By pressing a button on the FlexChain Host, the sensors can be addressed and taught-in automatically, meaning the system is immediately ready for use. Different sensor technologies can be combined and freely arranged: Through-beam photoelectric sensors, photoelectric sensors. The raw sensor data is evaluated via the FlexChain Host with integrated logic modules or forwarded directly via IO-Link, CANopen, RS-485 or I/O signals. Detailed diagnostic information ensures optimum process stability and measurement certainty during operation.
Switching automation light grids SLG-2– SICK
The SLG-2 is an automation light grid for various detection and measuring tasks. It features two optics variants: One with frontal and one with side light emission. They allow for the narrow light grid housing to be integrated into almost any application.
The SLG-2 has no blind zones and is available with detection heights from 100 mm to 2,400 mm.
Thanks to the 9x cross-beam function, the light grid achieves very high resolution and reliably detects even very thin objects. The Smart Tasks and the powerful IO-Link COM3 interface make processing of measurement data in the device possible. The detailed diagnostic information of the SLG-2 can be used for condition-based device maintenance.
The SLG-2 has no blind zones and is available with detection heights from 100 mm to 2,400 mm.
Thanks to the 9x cross-beam function, the light grid achieves very high resolution and reliably detects even very thin objects. The Smart Tasks and the powerful IO-Link COM3 interface make processing of measurement data in the device possible. The detailed diagnostic information of the SLG-2 can be used for condition-based device maintenance.
System for localization of parts PLOC2D - SICK
The PLOC2D is a vision sensor system for localization of parts in 2D. The system is equipped with a high quality imager combined with high performance localization algorithm for reliable and fast part localization. The sensor system is self-contained in the IP 65 housing and connects directly to the robot controller or PLC and is out of the box ready to use. The user interface is designed and tailored for easy setup and maintenance in the production line.
SZM Bypass level indicator - Kobold
As an indicator of levels in small and medium-sized, upright or horizontal, round vessels, the SZM is particularly recommended for use in the food industry, water treatment and the pharmaceutical and chemical industries.
The SZM type glass tube level indicator is applicable for the indication of liquid level in small and middle-sized, standing or lying round containers used in food, pharmaceutical and chemical industries. The loads occurring at the installation are absorbed by the outer armature, thus the glass tube is protected against breaking.
The SZM type glass tube level indicator is applicable for the indication of liquid level in small and middle-sized, standing or lying round containers used in food, pharmaceutical and chemical industries. The loads occurring at the installation are absorbed by the outer armature, thus the glass tube is protected against breaking.
T40 II Rattler™ Portable Single Gas Monitor and T-Dock™ - Industrial Scientific
Protect workers in hazardous environments with the T40 II Rattler™. The T40 II Rattler™, from Industrial Scientific, is a compact, lightweight, and robust Portable Single Gas Monitor with rapid sensor response time so workers can better take action during dangerous situations. And the available T-Dock™ accessory offers automated management and ultra-fast bump testing for 8 instruments simultaneously.
Tag-based localization LOCU - SICK
Process optimization thanks to full data transparency
Logistics processes in warehousing and manufacturing are subject to a constant striving for efficiency. The objective is to reduce costs and increase the quality of the sequential processes.
For optimal planning and problem-free execution of downstream processes, it is essential to be able to accurately localize goods and items. This is the only way, for example, to reduce unnecessary machine downtimes through knowledge of the incoming products.
SICK’s LOCU range of hardware components for indoor localization provide full transparency in intralogistic processes. LOCU employs ultra-wideband technology (UWB) based localization tags and antennas for receiving and evaluating telemetry data, to localize tagged objects in the covered logistic and manufacturing areas.
Logistics processes in warehousing and manufacturing are subject to a constant striving for efficiency. The objective is to reduce costs and increase the quality of the sequential processes.
For optimal planning and problem-free execution of downstream processes, it is essential to be able to accurately localize goods and items. This is the only way, for example, to reduce unnecessary machine downtimes through knowledge of the incoming products.
SICK’s LOCU range of hardware components for indoor localization provide full transparency in intralogistic processes. LOCU employs ultra-wideband technology (UWB) based localization tags and antennas for receiving and evaluating telemetry data, to localize tagged objects in the covered logistic and manufacturing areas.
Talk2M Easy Setup - HMS
Simplified connectivity for the automation engineer.
HMS Networks now announces Talk2M® Ewon's easy and secure industrial cloud
Talk2m industrial cloud is a reliable and efficient solution for remote connectivity, based on a global and redundant server infrastructure.
Thanks to the combination of Talk2m and Ewon gateways, you can remotely access your machines and monitor their performance.
HMS Networks now announces Talk2M® Ewon's easy and secure industrial cloud
Talk2m industrial cloud is a reliable and efficient solution for remote connectivity, based on a global and redundant server infrastructure.
Thanks to the combination of Talk2m and Ewon gateways, you can remotely access your machines and monitor their performance.
Tango TX2 two-gas detector – Industrial Scientific
Increase site safety with the Tango TX2, the most accurate two-gas monitor on the market.
The new Tango TX2, two-gas monitor increases site safety by allowing users to detect two gases with one small, reliable monitor.
With individual sensors for each gas, the Tango TX2 is the most accurate two-gas monitor on the market.
The new Tango TX2, two-gas monitor increases site safety by allowing users to detect two gases with one small, reliable monitor.
With individual sensors for each gas, the Tango TX2 is the most accurate two-gas monitor on the market.
Temperature and pressure sensors with IO-Link – Jumo
The long stopping times belong to the past. The new JUMO temperature and pressure sensors with IO-Link use the integrated diagnostic function to better plan the availability or exchange of sensors.
Flexibility, production process optimization and remote maintenance are important performance parameters for machines or manufacturing facilities. The sensors with IO-Link give the operator access to the most basic field level. The effort to recover information, parameterization and diagnosis of the sensors is minimal, so that the evaluation of the conditions of the equipment is ideal.
The efficient IO-Link point-to-point communication is based on the well-known three-wire sensor connection. The IO-Link is a serial and bidirectional point-to-point connection for signal transmission and power supply in any number of networks, field or support.
Flexibility, production process optimization and remote maintenance are important performance parameters for machines or manufacturing facilities. The sensors with IO-Link give the operator access to the most basic field level. The effort to recover information, parameterization and diagnosis of the sensors is minimal, so that the evaluation of the conditions of the equipment is ideal.
The efficient IO-Link point-to-point communication is based on the well-known three-wire sensor connection. The IO-Link is a serial and bidirectional point-to-point connection for signal transmission and power supply in any number of networks, field or support.
Temperature controller N1030 – Novus
N1030 is the most compact temperature controller in the market.
Easy to install and configure, the N1030 fits perfectly into the most distinct panels, including small ones. It can be configured to accept thermocouples type J, K and T, and also Pt100.
Easy to install and configure, the N1030 fits perfectly into the most distinct panels, including small ones. It can be configured to accept thermocouples type J, K and T, and also Pt100.
Temperature sensor TBS – SICK
The TBS temperature switch is easy to use and has a rugged design. It is designed for temperature measurement and monitoring of operating liquids, such as hydraulic oils, coolant lubricants and cleaning liquids in machine building and manufacturing.
With up to two binary outputs and one analog output, it can be used in many applications. A large, well legible display and three pushbuttons facilitate setup. The intuitive menu navigation and display use familiar and standardized features and programming. The switching state of the binary outputs is displayed by highly visible LEDs. During installation, the TBS is uniquely flexible due to its two rotation locations. It is possible to rotate the display and the process connection independently of the sensor body, ensuring both clean cable layout and that the display is facing the user. Temperature measurement is done using a Pt1000 element that is located in the tip of the stainless steel probe.
With up to two binary outputs and one analog output, it can be used in many applications. A large, well legible display and three pushbuttons facilitate setup. The intuitive menu navigation and display use familiar and standardized features and programming. The switching state of the binary outputs is displayed by highly visible LEDs. During installation, the TBS is uniquely flexible due to its two rotation locations. It is possible to rotate the display and the process connection independently of the sensor body, ensuring both clean cable layout and that the display is facing the user. Temperature measurement is done using a Pt1000 element that is located in the tip of the stainless steel probe.
Temperature sensor TBT – SICK
The TBT is a universal purpose Pt100 resistance thermometer with a splash-proof die-cast aluminum housing for the temperature measurement in liquids and gases. It can be adapted to specific applications through its various available process connections and insertion lengths.
The TBT is available with various connection threads, with or without compression fittings. Wetted parts are made from high-grade stainless steel 1.4571. Besides its Pt100 output signal, the TBT is available with an integrated transmitter with output signal 4 mA ... 20 mA.
The TBT is available with various connection threads, with or without compression fittings. Wetted parts are made from high-grade stainless steel 1.4571. Besides its Pt100 output signal, the TBT is available with an integrated transmitter with output signal 4 mA ... 20 mA.
Temperature sensor TSP - SICK
The TSP is a universal purpose platinum insertion thermometer for the temperature measurement in liquids and gases. It can be adapted to specific applications through its available connection threads and insertion lengths.
Wetted parts are made from stainless steel 1.4305. The platinum resistor (Pt100 or Pt1000, accuracy class B according to IEC 60751) is located inside the tip of the probe. It is electrically connected by an M12 x 1 circular connector. Therefore, the device is compact and well suited for narrow installation spaces.
Wetted parts are made from stainless steel 1.4305. The platinum resistor (Pt100 or Pt1000, accuracy class B according to IEC 60751) is located inside the tip of the probe. It is electrically connected by an M12 x 1 circular connector. Therefore, the device is compact and well suited for narrow installation spaces.
Temperature sensor with IO-Link dTRANS T1000 - Jumo
The temperature sensor is used for temperature measurement and monitoring. The effect of the temperature on a resistance RTD temperature probe generates a signal, which is amplified, digitalized and processed. The temperature sensor is equipped with an IO-Link interface as per specification 1.1. IO-Link supports bidirectional communication and is used to exchange the process data, parameters, diagnostic information and status messages.
Temperature sensors type K - Marshall
Marshall thermocouple sensors are suitable for temperature measurement in liquid metals up to a maximum of 1350 ° C.
K Marshall thermocouples are robust and reliable sensors for measurement in aluminum, bronze, brass and copper (alloy) castings. Constructed in steel coated with a thin layer of graphite, they can be used directly in the liquid metal without preheating.
K Marshall thermocouples are robust and reliable sensors for measurement in aluminum, bronze, brass and copper (alloy) castings. Constructed in steel coated with a thin layer of graphite, they can be used directly in the liquid metal without preheating.
Temperature sensors with wireless technology – F.Fonseca
The need to measure temperature in remote or hard-to-reach places created the need to use wireless technology to overcome physical obstacles. By incorporating the Jumo Wtrans B transmitter into F.Fonseca sensors, we have brought down the physical barriers that have hitherto prevented the measurement of temperature in remote, moving or hard-to-reach places.
Using the 868.4 MHz transmission frequency the Jumo Wtrans B transmitter allows F.Fonseca temperature sensors to integrate the transmitter and the antenna into the sensor itself. The programmable transmitter is universal and applicable in type B heads, having operating temperature between -30 ° to 85 ° C. The antenna with M20x1.5 connection will includes a 3.6V 2.2Ah lithium AA battery and has a maximum range of 300m in the open field.
Using the 868.4 MHz transmission frequency the Jumo Wtrans B transmitter allows F.Fonseca temperature sensors to integrate the transmitter and the antenna into the sensor itself. The programmable transmitter is universal and applicable in type B heads, having operating temperature between -30 ° to 85 ° C. The antenna with M20x1.5 connection will includes a 3.6V 2.2Ah lithium AA battery and has a maximum range of 300m in the open field.
Temperature switch-digital TDD - Kobold
Kobold temperature switches of model TDD are used for economical measurement and monitoring of temperature. They are suited for applications where temperature must be monitored with a high degree of switching accuracy.
A semiconductor, which outputs a digital signal to the evaluating electronics in 0.5 °C steps, serves as sensor element. The current measured value is displayed on a 3-digit LED display. Two switch points, on-/off-switching delay and hysteresis are adjustable within the measuring range.
A semiconductor, which outputs a digital signal to the evaluating electronics in 0.5 °C steps, serves as sensor element. The current measured value is displayed on a 3-digit LED display. Two switch points, on-/off-switching delay and hysteresis are adjustable within the measuring range.
Temperature transmitter dTRANS T01- Jumo
The dTRANS T01 Temperature Transmitter is a universal transmitter (RTD and Thermocouple), galvanically isolated, with 4 to 20 mA output and HART interface. Programmable by software.
The 2-wire transmitter, from Jumo, senses the temperature by means of a RTD temperature probe or a thermocouple. For RTD temperature probes, the probe can be connected in a 2, 3 or wire circuit. The probe type, connection type, and measurement range can be configured using a configuration program. The 4 to 20 mA or inverted 20 to 4 mA output signal is provided linearized (temperature-linear). The device is designed for industrial applications and complies with the respective European standards for electromagnetic compatibility (EMC). For potentially explosive atmospheres we have the dTRANS T01 Ex complies with the directives concerning the explosive areas according to the declaration of conformity.
The 2-wire transmitter, from Jumo, senses the temperature by means of a RTD temperature probe or a thermocouple. For RTD temperature probes, the probe can be connected in a 2, 3 or wire circuit. The probe type, connection type, and measurement range can be configured using a configuration program. The 4 to 20 mA or inverted 20 to 4 mA output signal is provided linearized (temperature-linear). The device is designed for industrial applications and complies with the respective European standards for electromagnetic compatibility (EMC). For potentially explosive atmospheres we have the dTRANS T01 Ex complies with the directives concerning the explosive areas according to the declaration of conformity.
Temperature transmitter dTRANS T06 Ex – Jumo
The dTRANS T06 Ex, is the new multifunctional 4-wire signal transmitter for applications that demand a high level of security.
This multifunctional unit makes it possible to establish safe measurement chains (SIL 2 or SIL 3), allowing temperature probes to be used in EX 0 zones. The dTRANS T06 Ex can be used with RTD temperature probes, thermocouples, potentiometers, voltage and current signals. The transmitter converts these input signals into outputs signal 0(2) at 10V or 0(4) at 20mA.
This multifunctional unit makes it possible to establish safe measurement chains (SIL 2 or SIL 3), allowing temperature probes to be used in EX 0 zones. The dTRANS T06 Ex can be used with RTD temperature probes, thermocouples, potentiometers, voltage and current signals. The transmitter converts these input signals into outputs signal 0(2) at 10V or 0(4) at 20mA.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1