Cable drag chain systems EFK - Murrplastik

Murrplastik Systemtechnik GmbH are the specialists for cable protection conduit systems, cable entry systems and cable drag chain systems.

Murrplastik offers an all-around solution for several areas of application: Cable drag chains, guide channels, cables, strain relief plates and assembly. Our chains have been able to proof their quality and durability under the most extreme continuous loads and environmental conditions.

Online configurator: https://mympchain.com/

Cable drag chains EVOCHAIN® - Murrplastik

Murrplastik has developed the EVOLINE® concept. A unique and harmonized approach that integrates cable drag chains from the EVOCHAIN® series and flexible cables from the EVOCABLE® series. Together, to improve installation time and service life.

The EVOCHAIN® series combine the latest developments and proved qualities of previous energy chains. The available variants are predestined for long and gliding travel distances
with high dynamics and workload. These intelligent and powerful system solutions are outstanding in what concerns easy of assembly, durability and noise reduction.

Cable drag chains MP 45.2/MP 52.4/MP 52.5/MP 62.4 – Murrplastik

The new generation of cable drag chain system from Murrplastik offers an all-around solution for several areas of application: cable drag chains, guide channels, cables, strain relief plates and assembly. Murrplastik drag chains have been able to proof their quality and durability under the most extreme continuous loads and environmental conditions.

As a manufacturer of cable drag chains for over 30 years, Murrplastik has numerous patents for innovative products and great product diversity off-the-shelf.
The Murrplastik has been setting industry standards in cable drag chains for years especially with regards to ease of assembly and maintenance. The comprehensive portfolio of Murrplastik cable drag chains offers a range of inner widths from 6 to 546 mm. Murrplastik cable drag chains are used all over the world and meet the highest demands on durability and robustness.

Cable entry system KDL/C and KDL/D - Murrplastik

Ready for the toughest jobs.!
A product first: Murrplastik Systemtechnik now offers a separable cable entry for pre-assembled cables compatible with protection class IP65.

With KDL/C and KDL/D, Murrplastik Systemtechnik (Oppenweiler) presents two new cable entry plates for ultra-durable deployment in extremely tough industrial environments. Everywhere, in fact, where high mechanical stresses, moisture, acids, lyes, alcohols, mineral oils, fuels, greases and dust make life truly difficult for any piece of plant or system component. Although KDL/C already satisfies protection class IP54, Murrplastik goes even further with the KDL/D model: protection class IP65 is now also possible as a retrofit option even for completely separable systems. Both cable entry plates can be deployed at temperatures ranging from -30 °C to +100 °C.

Cable entry system, type KDL/E+ - Murrplastik

The KDL/E+ represents the 3rd generation of Murrplastik cable entry system, being the perfection of KDL/E. During the development, are significantly improved the protection class, flexibility and stability. With the consistent expansion of sizes and accessories.

KDL/E+ is a completely splittable, stackable and stable cable entry system with high density and good strain relief for cables with connectors.

Cable entry systems KDH – Murrplastik

Murrplastik is well known by the innovative cable entry systems. The different available solutions enables the quick and simple installation of cables with or without connector.
Is possible to use a cable entry system designed for inserting pre-assembled cables and electrical conduits in divider walls, junction boxes, control cabinets, etc. For other application, the cable insertion panel is a routing and fastening system for cables without plugs or pneumatic hoses.

Cable fitting - plastic version – Murrplastik

Murrplastik cable fittings in various versions. In plastic and metal.

For EMC applications and for explosive areas. Multi-inserts make the fittings even more versatile. With metric, Pg and NPT threads.

Cable fitting – metallic version – Murrplastik

Murrplastik cable fittings in various versions. In plastic and metal.
For EMC applications and for explosive areas.

Multi-inserts make the fittings even more versatile. With metric, Pg and NPT threads.

Cable Fixation - Cable entry membranes, type KDM - Murrplastik

The Murrplastik cable entry membranes are produced of polyethylene and thermoplastic elastomer respectively EPDM.

They are useful for electrical cables and pneumatic hoses used in control cabinets, systems and mechanical engineering. Wherever quick mounting is required with high packing density and cables must be protected, the single-cable en-tries are used.

KDM is a cable entry system for cables without connectors. The various sizes fit to metrical cut-outs from M16 to M32.

Cable Protection - R-Tec Box - Murrplastik

Length-compensating energy supply for industrial robots.

Murrplastik Systemtechnik GmbH are the specialists for cable protection conduit systems, cable entry systems, labelling systems and cable drag chain systems.
Right from the beginning priority was given to a systematic approach. That is still the case today. These systematic approaches have formed the basis for continuous expansion:
Since 2006, we have expanded our range of services to include products and services for automation and robotic equipment systems.

Cabos compensados – F.Fonseca

The compensated cables allow the correct connection of thermocouples and thermoresistences to the reading and control equipment.
The compensated cables are identified by the composition of the materials that constitute them. The most commonly used are type K, J, S, R, B, T and N. They can be distinguished by the color of the outer coating and F.Fonseca uses the IEC standard in the color coding of the cables that it sells. The compensated cables can be extension or compensation, according to the specific need. The outer coating may vary between the metallic braid, the PVC, the silicone, or the teflon.
F.Fonseca also provides cables for RTD's, which can be 2, 3, 4 or 6 wires. With the coating option vary between metal braid, silicone or Teflon.

Calibration software PCAL - Additel

The Additel PCal pressure calibration software is used with the 681 pressure gauges, 672 calibrators, and any of the 9XX pumps.

Cameras with external processing - midiCam - SICK

Rugged, industry-grade digital cameras with GigE interface.
Streaming cameras provide continuous data acquisition for external image processing on a PC. With a variety of data generation options, including 2D and 3D images, they offer maximum flexibility.

With IP67 enclosure rating, the midiCam streaming camera family is ideally suited to use in harsh industrial environments. This is why the midiCam has an M12 GigE interface – the standard for industrial image processing – as well as industry-grade M12 connections for the voltage supply and trigger signals. As an alternative, it is also possible to operate it with just one cable measuring up to 100 m in length using Power over Ethernet (PoE).

Capacitive Level Limit Switch NSC - KOBOLD

The KOBOLD level monitor devices model NSC are used for the monitoring of minimum and maximum levels in silos and depots. They are working on the capacitive principle and can be supplied in two different designs. They are suitable for various installation conditions. The level monitoring device NSC-R is supplied with a rigid stainless-steel probe with a PTFE coating.

This model is mostly used for monitoring the maximum level. For small silos and low bulk densities the short version can also be installed on the side for controlling of the minimum level. The level monitor device NSC-C consists of a stainless-steel probe body, which is connected to the connection box by means of a steel cable coated with polypropylene.

Capacitive proximity sensors CM – SICK

Capacitive proximity sensors from SICK can detect all powdery, granulated, liquid, and solid materials – even through plastic or glass walls.
Sick’s capacitive proximity sensors feature extremely high electromagnetic compatibility (EMC), which prevents false switches and sensor failure.

Capacitive proximity sensors CQF - SICK

The SICK CQF capacitive level sensor detects liquids through container walls and through direct contact with the liquids. The measurement principle compensates for foam, moisture and deposits. This ensures that the CQF only detects the liquid in the container - nothing else.

For standard applications, the sensor is ready for operation without additional settings. For challenging applications, it can be taught-in quickly and easily using the cable. The mounting set offers different installation options, making the CQF is well-suited for countless customer applications.

Capacitive temperature humidity CO₂ probe – Jumo

The Jumo capacitive humidity probes have been designed for the most common heating, air-conditioning and ventilation applications. They are particularly distinguished by high measurement accuracy, excellent long-term stability and good chemical resistance.

The modern design allows a low cost of installation and offers the greatest possible protection against pollutants and condensation. These factors, in turn, contribute to smooth and trouble-free continuous use.

Capacitive temperature humidity probe - Jumo

The Jumo capacitive humidity probes have been designed for the most common heating, air-conditioning and ventilation applications. They are particularly distinguished by high measurement accuracy, excellent long-term stability and good chemical resistance.

The modern design allows a low cost of installation and offers the greatest possible protection against pollutants and condensation. These factors, in turn, contribute to smooth and trouble-free continuous use.

The CO2 measuring probes use infrared technology, proven to measure the concentration of carbon dioxide. The NDIR procedure has a patented automatic calibration function, eliminates the effects of aging and as a result, allows accurate measurement of CO2 values with long term stability.

Carbon monoxide (CO) meter for measuring T317-3 - Testo

Carbon monoxide (CO) is a colourless, odourless and taste-free gas, but also poisonous. Its sources include the incomplete combustion of substances containing carbon (oil, gas and solid fuels, etc.).

Cast aluminium enclosures GA - Rittal

Small enclosures. This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes.

With: Fibreglass-reinforced polycarbonate: Cast aluminium; Sheet steel with high-quality coating; Stainless steel.
Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.

Ceramic tubes and insulators - Sensor components – F.Fonseca

The ceramic tubes and insulators allow the protection and isolate the thermocouples and wires from the temperature sensors.
Ceramic tubes, from F.Fonseca, exhibit greater or lesser dynamic resistance depending on the amount of alumina used in their composition. The DIN 610 ceramic tubes contain 60% alumina in their composition and can be used at temperatures up to 1500°C. The DIN 799 ceramic tubes contain 99.7% alumina and can be used at temperatures up to 1800°C.
The DIN 799 tubes offer better shock resistance when compared to DIN 610.
In the insulators we have the same distinction of typology according to its composition. Insulators can have 1, 2 or 4 holes and their internal and external diameters are several depending on the thermocouples / wires to be used.

Certified power automation rack computer ECU-579 - Advantech

Advantech, a global leader in Industrial IoT technology, was one of the first enterprises to demonstrate virtualised environments for electrical substations. They recently showcased an electrical substation system that combined both virtual communications and virtual automation based on an Advantech ECU-579 2U power automation server platform optimized for virtualization. ECU-579 supports high performance and long system lifecycles required by the industry.

Circular connector system for Industry – gesis® RST POWER – Wieland Electric

Whether one single connection or a complex system, the task presented is the same: a system’s components must be quickly and reliably connected with each other. Even for expansions, periodic maintenance work, or exchange of defective equipment, operational downtimes are reduced to a minimum.

The new RST®POWER series, from Wieland Electric, is particularly designed for device engineering. With a current-carrying capability of 50 A combined with an extremely compact design, the connector fits almost everywhere. The 4-pole connector is based on the 5-pole variation, with one pole left empty.
With just a few basic components, including connectors, panel mount connectors, distribution units and cable assemblies, complex installations from the distribution panel up to each point of demand can be accomplished. This saves time and costs.

Clamp meter with Bluetooth® testo 770-3

The testo 770-3 clamp meter is the ideal clamp amperemeter for demanding measuring tasks in tight application environments. The movable pincer arm can be fully retracted into the instrument. This enables the instrument to grab tightly packed cables in a particularly accurate way.

Login

MyFFonseca

If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!