Products

Page 3 of 37
View

Baying systems TS8 - Rittal

TS 8, the Top enclosure system, a system platform for individual tasks. 
Every enclosure, with all-round accessibility, is a specialist - however particular the task in hand. 

BIOGAS analyser Multitec 545 - Sewerin

Multi-gas measuring device with infrared sensors and extended measuring range for hydrogen sulphide.

With the Multitec 545, up to five gases can be measured simultaneously. The very high H2S concentrations in wastewater treatment plants and palm oil factories, for example, place special demands on the measuring instrument. With its rugged design and wide H2S measuring range, the Multitec 545 is ideal for this use.

BIOGAS analyzer Multitec® BioControl 2 - Sewerin

The entry-level model for individual process optimization.

The BIOGAS analyser Multitec® BioControl2 da Sewerin is a unique measuring system comprising a fixed stationary unit and a mobile gas measuring device. It is used in small to medium-sized BIOGAS plants, landfills, wastewater treatment plants and composting plants.
 

BIOGAS measuring analyser Multitec 540 – Sewerin

Combined stationary measuring device with mobile gas meter.

The Multitec® BioControl is a combined measuring device consisting of the Multitec® BioControl fixed installation and a mobile gas measuring device, namely the Multitec® 540.

Depending on the version of Multitec® BioControl, the gas composition and volume can be automatically measured and monitored at up to eight measurement locations. The Multitec® 540 measures the values at the individual measurement locations sequentially. The values are transferred to the Multitec® BioControl via an interface.

The mobile gas measuring device must be regularly maintained to guarantee accurate measuring results. The Multitec® BioControl allows easy maintenance for the versions with four and eight measurement locations as standard, with automatic calibration and adjustment with test gas.

BM25 transportable multi gas monitor - TELEDYNE Oldham

Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument.

The BM25 packs the benefits of a fixed system area monitor into a rugged, user-friendly and transportable instrument. It was designed to detect one to five gases for mobile or temporary work applications, team protection, area surveillance or places where fixed detection systems are not suitable.
 

Bourdon tube pressure gauges MAN-Q e MAN-R – Kobold

These Kobold pressure gauges can be used for all applications where accuracy, repeatability and long-term stability are of special importance.
 
They can be used for liquid or gaseous substances which do not crystallize, are not highly viscous and do not corrode brass.
The extensive range of options allows the user to adapt the instruments to his own special requirements.
 

Bulkscan® LMS511 sensor - SICK

Non-contact and maintenance-free measurement of volume flow.
The Bulkscan® LMS511 uses time-of-flight laser technology to provide non-contact volume flow measurements on conveyor belts. No matter what kind of bulk materials are involved or how bad weather conditions are, the multi-echo technology allows the Bulkscan® LMS511 sensor, from SICK, to generate a reliable volume flow signal using the laser's time of flight and the belt speed.
 

Bus enclosures BG - Rittal

Small enclosures.
This is application-oriented diversity: 6 enclosure types in 4 materials and more than 100 sizes. 

With: Fibreglass-reinforced polycarbonate;  Cast aluminium;  Sheet steel with high-quality coating;  Stainless steel. Every aspect of your requirements is met. It goes without saying that all this is achieved in Rittal's familiar high quality, and to suit every security requirement.  

Bus-capable connection digiLine - Jumo

Intelligent, bus-capable connection system for digital sensors in liquid analysis.

With JUMO digiLine, JUMO presents a bus-compatible connection system for digital sensors in liquid analysis which also offers Plug and Play functionality. 

JUMO digiLine Opens the Door to Sensor Technology 4.0
JUMO digiLine enables simple construction of sensor networks in which sensors are connected to each other in a star or tree structure. A single shared signal line is used for communication with the next evaluation unit or controller. This way plants in which several parameters need to be measured at the same time in different places can be wired efficiently and quickly.

Bypass level indicator NBK - Kobold

Kobold bypass level indicators are used for continuous measurement, display and monitoring of liquid levels. The bypass tube is attached onto the side wall of the vessel. According to the law of communicating tubes, the level in the bypass tube equals the level in the vessel. A float with embedded circular magnets that is inside the bypass tube follows the liquid level and transfers that information, in a non-contacting manner, to a display fitted outside the tube or to a monitoring device.
 

Cable drag chain MP 560 EVOCHAIN® - Murrplastik

Murrplastik has developed a new energy chain series type EVOLINE that is unique and exclusive.
 
It combines the latest developments and proven qualities of previous energy chains. It is predestined for self-supporting, gliding, hanging and standing applications, as well as for long and gliding travel distances for high dynamics and workload. This intelligent and powerful system solution is outstanding in ease of assembly, durability and noise reduction.
 

Cable drag chain systems EFK - Murrplastik

Murrplastik Systemtechnik GmbH are the specialists for cable protection conduit systems, cable entry systems and cable drag chain systems.
 
Murrplastik offers an all-around solution for several areas of application: Cable drag chains, guide channels, cables, strain relief plates and assembly. Our chains have been able to proof their quality and durability under the most extreme continuous loads and environmental conditions.

Online configurator: https://mympchain.com/
 

Cable drag chains EVOCHAIN® - Murrplastik

Murrplastik has developed the EVOLINE® concept. A unique and harmonized approach that integrates cable drag chains from the EVOCHAIN® series and flexible cables from the EVOCABLE® series. Together, to improve installation time and service life.

The EVOCHAIN® series combine the latest developments and proved qualities of previous energy chains. The available variants are predestined for long and gliding travel distances
with high dynamics and workload. These intelligent and powerful system solutions are outstanding in what concerns easy of assembly, durability and noise reduction.
 

Cable drag chains MP 45.2/MP 52.4/MP 52.5/MP 62.4 – Murrplastik

The new generation of cable drag chain system from Murrplastik offers an all-around solution for several areas of application: cable drag chains, guide channels, cables, strain relief plates and assembly. Murrplastik drag chains have been able to proof their quality and durability under the most extreme continuous loads and environmental conditions.
 
As a manufacturer of cable drag chains for over 30 years, Murrplastik has numerous patents for innovative products and great product diversity off-the-shelf.
The Murrplastik has been setting industry standards in cable drag chains for years especially with regards to ease of assembly and maintenance. The comprehensive portfolio of Murrplastik cable drag chains offers a range of inner widths from 6 to 546 mm. Murrplastik cable drag chains are used all over the world and meet the highest demands on durability and robustness.
 

Cable entry system KDL/C and KDL/D - Murrplastik

Ready for the toughest jobs.!
A product first: Murrplastik Systemtechnik now offers a separable cable entry for pre-assembled cables compatible with protection class IP65. 

With KDL/C and KDL/D, Murrplastik Systemtechnik (Oppenweiler) presents two new cable entry plates for ultra-durable deployment in extremely tough industrial environments. Everywhere, in fact, where high mechanical stresses, moisture, acids, lyes, alcohols, mineral oils, fuels, greases and dust make life truly difficult for any piece of plant or system component. Although KDL/C already satisfies protection class IP54, Murrplastik goes even further with the KDL/D model: protection class IP65 is now also possible as a retrofit option even for completely separable systems. Both cable entry plates can be deployed at temperatures ranging from -30 °C to +100 °C.

Cable entry systems KDH – Murrplastik

Murrplastik is well known by the innovative cable entry systems. The different available solutions enables the quick and simple installation of cables with or without connector.
Is possible to use a cable entry system designed for inserting pre-assembled cables and electrical conduits in divider walls, junction boxes, control cabinets, etc. For other application, the cable insertion panel is a routing and fastening system for cables without plugs or pneumatic hoses.
 

Cable fitting - plastic version – Murrplastik

Murrplastik cable fittings in various versions. In plastic and metal. 

For EMC applications and for explosive areas. Multi-inserts make the fittings even more versatile. With metric, Pg and NPT threads.

Cable fitting – metallic version – Murrplastik

Murrplastik cable fittings in various versions. In plastic and metal.
For EMC applications and for explosive areas.
 
Multi-inserts make the fittings even more versatile. With metric, Pg and NPT threads.
 

Cable Fixation - Cable entry membranes, type KDM - Murrplastik

The Murrplastik cable entry membranes are produced of polyethylene and thermoplastic elastomer respectively EPDM. 

They are useful for electrical cables and pneumatic hoses used in control cabinets, systems and mechanical engineering. Wherever quick mounting is required with high packing density and cables must be protected, the single-cable en-tries are used.

KDM is a cable entry system for cables without connectors. The various sizes fit to metrical cut-outs from M16 to M32.

Cable Protection - R-Tec Box - Murrplastik

Length-compensating energy supply for industrial robots.

Murrplastik Systemtechnik GmbH are the specialists for cable protection conduit systems, cable entry systems, labelling systems and cable drag chain systems. 
Right from the beginning priority was given to a systematic approach. That is still the case today. These systematic approaches have formed the basis for continuous expansion: 
Since 2006, we have expanded our range of services to include products and services for automation and robotic equipment systems.

 

Cabos compensados – F.Fonseca

The compensated cables allow the correct connection of thermocouples and thermoresistences to the reading and control equipment.
The compensated cables are identified by the composition of the materials that constitute them. The most commonly used are type K, J, S, R, B, T and N. They can be distinguished by the color of the outer coating and F.Fonseca uses the IEC standard in the color coding of the cables that it sells. The compensated cables can be extension or compensation, according to the specific need. The outer coating may vary between the metallic braid, the PVC, the silicone, or the teflon.
F.Fonseca also provides cables for RTD's, which can be 2, 3, 4 or 6 wires. With the coating option vary between metal braid, silicone or Teflon.


 

Calibration software PCAL - Additel

The Additel PCal pressure calibration software is used with the 681 pressure gauges, 672 calibrators, and any of the 9XX pumps.
 

Cameras with external processing - midiCam - SICK

Rugged, industry-grade digital cameras with GigE interface.
Streaming cameras provide continuous data acquisition for external image processing on a PC. With a variety of data generation options, including 2D and 3D images, they offer maximum flexibility.

With IP67 enclosure rating, the midiCam streaming camera family is ideally suited to use in harsh industrial environments. This is why the midiCam has an M12 GigE interface – the standard for industrial image processing – as well as industry-grade M12 connections for the voltage supply and trigger signals. As an alternative, it is also possible to operate it with just one cable measuring up to 100 m in length using Power over Ethernet (PoE).

 

Capacitive proximity sensors CM – Sick

Capacitive proximity sensors from Sick can detect all powdery, granulated, liquid, and solid materials – even through plastic or glass walls.
Sick’s capacitive proximity sensors feature extremely high electromagnetic compatibility (EMC), which prevents false switches and sensor failure.
Page 3 of 37
View
  • 0
  • 1