Home
Online store
Probe configurator
Contacts

News

Filter
Page 3 of 8
View
16 September 2019

Electrical tester MI 3108 from Metrel

F.Fonseca presents electrical tester MI 3108 from Metrel Combined photovoltaic tester and electrical installations safety tester model MI 3108 Eurotest PV. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. The instrument allows all the tests as required by EN 62446, but also includes I - U characteristic, calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety, the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time. 
read more
16 September 2019

System for localization of parts PLOC2D from SICK

F.Fonseca presents system for localization of parts PLOC2D from SICK   The PLOC2D is a vision sensor system for localization of parts in 2D. The system is equipped with a high quality imager combined with high performance localization algorithm for reliable and fast part localization. The sensor system is self-contained in the IP 65 housing and connects directly to the robot controller or PLC and is out of the box ready to use. The user interface is designed and tailored for easy setup and maintenance in the production line.   With its intuitive and innovative user interface, the PLOC2D’s functionality can easily be tailored for use in any part localization application. With the PLOC2D, a new application can be configured in as little as five minutes, using the intuitive user interface and the EasyTeach function. The precise and rapid calibration and alignment functions ensure swift cloning and/or replacement of sensors, as configuration data can be re-used between devices.
read more
16 September 2019

IoT LTE Router RUT955 da Teltonika

F.Fonseca presents IoT LTE Router RUT955 from Teltonika In the IoT era there are several applications that normally require an internet access point, especially when they are remotely located without any infrastructure, usually outdoor. On the other hand certain machines may also need this type of equipment such as electric vehicle chargers, multimedia kiosks, etc ... RUT955 is a highly reliable and secure LTE router with I/O, GNSS and RS232/RS485 for professional applications. This router delivers high performance, mission-critical cellular communication and GPS location capabilities. RUT955 is equipped with connectivity redundancy through dual SIM failover. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.  
read more
16 September 2019

Electrical tester MI 3325 MultiServicer XD from Metrel

F.Fonseca presents electrical tester MI 3325 MultiServicer XD from Metrel The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must.   In Metrel range of the instruments it is introduced as a successor of MI 3321 MultiServicerXA. The new platform integrated in the MI 3325 MultiServicerXD features support for colour touch screen technology, advanced memory organizer including large SD memory card storage media and state of the art AUTOSEQUENCE®s.
read more
16 September 2019

Area Protection Solutions Safe Robotics from SICK

F.Fonseca presents area Protection Solutions Safe Robotics from SICK Flexible and efficient hazardous area protection for robots. Robots have become an indispensable part of modern industry. They make it possible to flexibly adapt to changing production conditions while keeping product quality at a consistently high level. To optimally enhance the performance of humans and to increase the productivity of plants, the robotic system should ideally be freely accessible. At the same time this must not pose any risk to the health or life of the employees. Safety is essential for the cooperation between humans and machines. SICK offers Safe Robotics Area Protection Solutions to enable free and safe access of the worker to the robot work area. These tailored complete solutions include hardware and engineering services: from planning to implementation through commissioning. The objective is to optimize the robotics applications by protecting hazardous areas in accordance with international standards. SICK safety solutions increase productivity, enable ergonomic processes and save time and money. Safe Robotics Area Protection Solutions prevent unnecessary robot stops. An automated restart can be implemented depending on the robot application.
read more
16 September 2019

Solutions Safe Entry Exit from SICK

F.Fonseca presents solutions Safe Entry Exit - SICK   Muting is now even easier. When it comes to the protection of machines and systems in the field of pallet conveyor technology, reliable and efficient differentiation between humans and materials is indispensable for maintaining productivity. Classic systems which detect these muting functions often need a large amount of mounting space and are very vulnerable to sensor displacement due to the protruding brackets for muting sensors. Safe Entry Exit from Sick is the TÜV-certified alternative to these safety solutions.   The Safe Entry Exit safety system is the alternative to the classic muting solution: Safe human-material differentiation which works without additional signal sensor technology and only needs one signal from the process control. As soon as the transport goods have passed the protective device, it is immediately ready again to protect humans from hazards. Safe Entry Exit is based on the proven Flexi Soft safety controller combined with every type 4 electro-sensitive protective device (ESPE) from Sick and is therefore very flexible and easy to adapt. A Flexi Soft safety controller assesses up to four material gates protected with Safe Entry Exit.
read more
11 September 2019

Techman Robot and F.Fonseca strengthen partnership

F.Fonseca presents the strengthen partnership between Techman Robot and F.Fonseca On March 25 and 26, 2019, we hosted Techman Robot, one of the world's largest manufacturers of collaborative robots and a partner of F.Fonseca in Portugal. This working visit focused on the knowledge of the potential of the Portuguese industry and the next technical developments of the TM robot family. Techman Robot thinks, creates and produces collaborative robots equipped with a unique vision system, being the first collaborative robots in the world with integrated artificial vision! Representing Techman Robot were the commercial director Judy Chang, the responsible for Europe Jim Lin and one of the responsible technicians Jennifer Lee. Techman Robot's stay in Portugal was used to visit some companies, which allowed them to get to know part of the reality of the Portuguese industry. After this visit, the F.Fonseca and Techman Robot partnership was further strengthened, with the prospect of increasing the use of TM collaborative robots in Portugal.  
read more
11 September 2019

Robotiq na F.Fonseca para formação técnica e comercial

A F.Fonseca apresenta a Robotiq nas suas instalações para formação técnica e comercial Nos dias 16 e 17 de abril de 2019 acolhemos nas nossas instalações o líder mundial e nosso novo parceiro na área da robótica a empresa Canadiana Robotiq. Esta ação pretendeu dar formação técnica e comercial aos nossos colaboradores.   A Robotiq cria e produz soluções plug&play para robôs colaborativos, como por exemplo, pinças e sensores de força. É o líder mundial nesta área e desenvolveu soluções plug&play específicas para a gama de robôs TM da Techman Robot.   A formação comercial ficou a cargo do Responsável Comercial para Europa Stéphane Vigot e a formação técnica pelo Técnico Alain Trudel. Foi uma formação extremamente interessante em que foram abordados, entre outros assuntos, os produtos que compõem o portfólio da Robotiq e as aplicações tipo para cada uma dessas soluções. Um dos aspetos abordados foram os vários casos reais desenvolvidos em conjunto com os nossos parceiros e Clientes.   Como conclusão, foi uma jornada intensiva e cheia de boas novidades, a qual permitirá progredirmos mais e melhor nas soluções robóticas colaborativas que disponibilizamos na era da Indústria 4.0.
read more
24 July 2019

F.Fonseca Day - Technology, Innovation, Future

F.Fonseca promotes the 2nd edition of F.Fonseca Day - october 8th   After the success of the first edition in 2015, F.Fonseca holds, in commemoration of its 40th anniversary, the second edition of F.Fonseca Day. This event will take place on october 8th at the Montebelo Vista Alegre hotel in Ílhavo .   Showing the best and most innovative things to promote and do at F.Fonseca and the Portuguese industry, always with a look to the future, remains F.Fonseca Day's main motive and goal. Technology, integration and value creation always!   In addition to today's professionals, F.Fonseca Day opens its doors for the first time to tomorrow's professionals! During the morning of october 9th, students from schools and universities will have the opportunity to get to know the high tech and knowledge that F.Fonseca promotes daily.   It's time to challenge ourselves, we count on your presence! Visit the event page and register!  
read more
18 July 2019

Safety laser scanner outdoorScan3 from SICK

F.Fonseca presents safety laser scanner outdoorScan3 from SICK The safety laser scanner for outdoor automation. With the outdoorScan3, SICK is once again underscoring its sustainable innovation and technology leadership. The world’s first safety laser scanner for outdoor use that is certified according to IEC 62998 facilitates simple and safe outdoor automation in entirely new dimensions. Whether in production and logistics processes, for monitoring hazardous areas, in mechanical engineering or docking passenger boarding bridges, outdoorScan3 ensures people are always kept safe. It works with the same level of reliability and efficiency as our customers have come to expect from our indoor laser scanners. Disruptive weather influences such as rain, snow, sunlight and fog are filtered out with ease by the safety laser scanner. As a result, it offers virtually limitless potential for increasing productivity and opening up new business fields. And as for how to handle it, this is no different to what you are already used to from our microScan3.   The outdoorScan3 safety laser scanner protects people in a wide range of mobile and stationary outdoor applications. Thanks to intelligent algorithms and the outdoor safeHDDM® scanning technology, operation is reliable even in harsh weather conditions, which considerably increases your productivity. The outdoorScan3 stands out thanks to the rugged housing, smart connectivity and advanced diagnostic functions. The Safety Designer configuration software from SICK also enables easy and intuitive operation.
read more
18 July 2019

Industrial touch monitor TPC-200/500 from Advantech

F.Fonseca presents industrial touch monitor TPC-200/500 from Advantech The flexible modularized technology design allows users to change the monitor size or computer CPU performance according to their usage demands.   Industrial touch monitor TPC-200 and TPC-500 computing box modules are powered by 6th Gen Intel® Core™/Celeron® processors combined with an industrial-grade LED LCD module, providing compact and fanless control panel solutions that support high-performance computing. With a flexible modular design, they allow users to inter change video interfaces such as FPM 7000 industrial monitors, which can be used as an interface of two controllers simultaneously via the PiP (Picture-in-Picture) feature, or expand the signal transmission distance to 100m via iLINK technology.
read more
18 July 2019

Techman Robot TM-M Mobile Series

F.Fonseca presents the ideal solution for integration in AGVs and other mobile vehicles from Techman Robot   Techman Robot's TM-M mobile series, comprising the versions TM5M-700, TM5M-900, TM12M-1300 and TM14M-1100, are powered at 20-60V DC, making them compatible with most brands of AGVs and others mobile vehicles. Through the use of “TM - Landmark”, mobile robots can orient themselves in a 3D space, as an automatic data sequence, to serve several machines. This allows the TM-M to operate between two or more positions without problems. With the commitment to this mobile series, with integrated vision system, Techman offers customers a complete solution that allows greater versatility and provides high performance automation solutions for industrial production. The main features of this series are the DC power supply from 20VDC to 60VDC, the integrated vision that, through the use of the “TM - Landmark”, allows the robot to orient itself in a 3D space, being available in the TM5M-700, TM5M-900 versions, TM12M-1300 and TM14M-1100. Simplicity, intelligence and security are the absolute advantages of this solution. Simplicity at the level of revolutionary user interface system and easy to implement, intelligence with the integrated vision system (master in robotic vision) and the security adequate to the requirements of ISO10218-1 & ISO / TS15066. The TM-M mobile series from Techman Robot is suitable for different applications that include, among others, logistics, handling, palletizing, deburring and the electronics industry.      
read more
16 July 2019

TMFlow programming software from Techman Robot

F.Fonseca presents TMFlow programming software from Techman Robot   There is no need to learn a new programming language! TMflow is an innovative fully graphical robot programming software based on flow diagrams. TMflow allows the user, even those without programming experience, to simply and intuitively program the robot using a tablet or computer. Each function is presented as an icon, which makes programming as simple as drag & drop (drag and drop) to generate new code. TMflow has also incorporated standard function blocks for vision that allows the robot to be easily implemented in several applications and to reduce the investment in terms of costs and hours in programming for vision systems. Techman Robot's TMFlow programming software is ideal for applications in logistics, handling, palletizing, deburring and electronics applications.
read more
26 June 2019

Training catalog 2019

F.Fonseca presents new training catalog 2019   The challenge is annual and extremely motivating: create a training plan that is perfectly adapted and geared to the current needs of trainees and at the same time prepared to respond to the demands and trends of current and future industry!   It is incredible the responsibility we assume. What we do can and should have a positive impact on productivity, profitability and performance of professionals and companies. Fortunately we have achieved it. Essentially thanks to the knowledge and differentiator of our trainers.   More than trainers, our team is made up of professionals of excellence and specialists in each of the areas in which they work. We believe in specialization and above all we believe in the importance of the "real" experience of those who teach. Nothing else has the value of experience and experience on the ground. This is what adds value to those who look for us and trust in our work.   The 2019 training plan is based exactly on the above mentioned principles. Preparation and innovation based on experienced and specialized knowledge.   This is a plan for the present but prepared for the here comes. Proof of this is the inclusion of new actions in the field of robotics, industry 4.0 and industrial automation. Safety is timeless and always has a prominent presence in our training offer.   The basic electrical and mechanical training and other cross-industry (and not only) areas complete our plan, guaranteeing its richness and diversity.   In the end we are proud to present a little more than 30% of new actions, thus proving the vitality and restlessness that we are both proud to have and promote.   This is also a result of the collaboration of our trainees and their organizations, who, through the needs they are registering and the requests they are making, help us decisively to build and complete our training offer.   We are all grateful for the contribution and preference! Ask for your catalog free of charge via email formacao@ffonseca.com or download the digital version.  
read more
14 June 2019

Power distribution podis® CON – Wieland Electric

F.Fonseca presents power distribution podis® CON from Wieland Electric podis®con is is a pluggable, modular power bus system for remote power supply. Because of the simple, non-interrupted maintenance and service possibilities, podis®con guarantees the highest system availability. With it, many functions such as power distribution, illumination, or active components can be directly mounted to the power bus without requiring additional fastenings. With the podis®con plug, as many additional devices as needed can be connected and flexibly positioned.   The podis® power bus system is ideal for decentralized power distribution in machines and systems with large dimensions. The power bus portfolio has now been extended to include a new variant for high currents. Significantly higher loads can now be supplied on a flat cable section. This means that the main distribution for a conveyor line, for example, can be installed very easily. Supply lines and main distribution cabinets can mostly be avoided or can be reduced in numbers and decreased in size. The podis® tray cable power bus is suitable for conveyor systems at airports and in warehouses, in logistics centers for parcel & post, and in production facilities for instance in the automotive industry or for supplying manufacturing facilities. The connection modules are designed for higher current and for higher voltage. At the same load the voltage drop is reduced in installations with very long cable lengths. podis® does convince its users especially by its fast and safe installation, thanks to the piercing technology without any dismantling or uninsulation. So the systems provides highest flexibility during set-up of a plant, as well as in extensions or rearrangement afterwards. The modular system podis® provides feed-in modules, tap-off modules, distribution modules, disconnector switches, fixed and pluggable tap-offs, pre-manufactured cable harnesses and a useful range of accessories.
read more
17 May 2019

A F.Fonseca celebrou o seu aniversário no Palácio da Borralha.

40 anos de sucesso e aprendizagem, que venham os próximos 40! A F.Fonseca fez 40 anos de existência, a 27 de dezembro de 2018. Embora essa data tenha sido comemorada de forma intensa, no próprio dia de aniversário, nas instalações da empresa, a celebração junto de colaboradores, clientes, fornecedores, parceiros e amigos aconteceu no passado dia 27 de maio, no Palácio da Borralha, em Águeda. A festa contou com mais de 250 convidados que desfrutaram de uma noite muito especial, repleta de glamour, surpresas e emoções fortes!   A gala foi apresentada pela dupla de modelos, Pedro e Ricardo Guedes, que contaminaram todos os presentes com o seu humor e boa disposição.   O discurso do Presidente do Conselho de Administração, Carlos Gonçalves, marcou a abertura do jantar de gala onde foram referidos diferentes marcos e histórias destes já 40 anos de existência. Carlos Gonçalves, em forma de resumo, deixou a seguinte ideia chave “desde a nossa fundação tivemos a habilidade de transformar as adversidades em oportunidades. Foi assim que nascemos e foi assim que crescemos. A perseverança é um traço vincado na nossa identidade que, sem dúvida alguma, contribuiu de forma determinante para o sucesso do nosso percurso. Sempre tivemos a vontade de adquirir as competências necessárias e de estar perto de quem precisa de nós. Diz-se que ao marinheiro sem rumo qualquer vento é favorável. Nós sempre nos preocupámos em definir o nosso caminho.” Sendo a última ideia, que fez questão de destacar, a da importância das pessoas certas e o agradecimento a todos os players envolvidos!   Logo de seguida foi convidada a subir ao palco a Presidente da Junta de Freguesia de Esgueira, Dr.ª Angela Almeida, que felicitou a F.Fonseca pelo seu percurso e por ser um exemplo a seguir das empresas sediadas na freguesia sob a sua gestão. Terminou destacando o espírito que se vive na F.Fonseca e desejando que este sucesso se prolongue, pelo menos, por mais 40 anos.   Após as intervenções iniciais deu-se lugar ao jantar e música ao vivo prosseguido pela continuação das apresentações e muitas surpresas. A primeira das quais foi para o próprio Carlos Gonçalves que recebeu, em nome de todos os colaboradores, uma pintura a óleo com o seu retrato, autoria da colaboradora, e também filha, Paula Gonçalves. Entre a emoção do momento e um tom de brincadeira disse que, desta forma, o estariam a convence-lo a ficar ainda mais uns anos na empresa, nem que fosse “omnipresente”. Peça de arte Ainda no ramo das artes plásticas, seguiu-se uma surpresa para todas as entidades convidadas. A artista plástica Rute Rosas criou uma peça exclusiva, numerada e assinada, para homenagear o 40º aniversário da F. Fonseca. Inspirada na cidade de Aveiro e nas relações interpessoais desenvolveu uma escultura estilizada de um moliceiro envolvido por um corpo de água, intitulada “Da lembrança… uma trajetória”. Durante a sua apresentação mostrou, através de um vídeo, toda a minucia e singularidade da peça, e do processo criativo, que impressionou todos os presentes.   O segundo momento da gala foi marcado pela homenagem às marcas, clientes e colaboradores que estiveram com a F.Fonseca desde sempre.   Marcas mais antigas Na primeira categoria, a das marcas mais antigas, foram distinguidas as primeiras marcas da F.Fonseca presentes nesta cerimónia e reconhecidas entre as principais líderes mundiais, nas suas áreas de negócio. Para receber o prémio da marca mais antiga foi chamado ao palco o Diretor Geral da Steinel, Martin Frechen, que recebeu a devida homenagem, fruto de uma parceria iniciada há 39 anos, em 1980. A segunda marca mais antiga chamada ao palco, reconhecida pela qualidade inquestionável dos seus equipamentos, foi a Sick com 31 anos de parceria iniciados em 1988. Para receber esta distinção subiu ao palco o Diretor Geral da Sick Espanha, Lluis Martinez. Last but not least… para receber o galardão da 3ª marca mais antiga foi chamado ao palco o Division Manager da Mitsubishi Electric Europe, Alex Agelet, que se juntou à F.Fonseca em 1992, traduzindo-se em 27 anos de parceria. Prémio clientes mais antigos Os negócios não se fazem sem clientes e a F.Fonseca orgulha-se dos seus. Grande parte deles acompanha a empresa há largos anos e nunca é demais agradecer a sua fidelidade. Estes clientes sabem que é para eles que a F.Fonseca trabalha, inova e procura incansavelmente fazer mais e melhor. Estando presentes alguns destes clientes, que acompanham a F.Fonseca quase desde o início, foi dado o mote à categoria de clientes mais antigos. Para proceder à entrega foi chamado ao palco o colaborador responsável pela área comercial da F.Fonseca, o Gestor de Negócios Helder Lemos, que homenageou os representantes dos três clientes mais antigos, das 3 áreas comerciais da F.Fonseca. Na área de negócio de automação industrial a distinção foi para a The Navigator Company, em processo instrumentação e ambiente a distinção foi para a Diferencial e, por fim, na área de negócio de tecnologia de edifícios foi premiado o Grupo Rolear que também celebra, este ano, o seu 40º aniversário!   Colaborador mais antigo  “É a excelência das pessoas que trabalham connosco que garante o sucesso da nossa empresa”. Palavras de Carlos Gonçalves, Presidente do Conselho de Administração. A F.Fonseca tem como missão trabalhar cada vez mais e melhor, não apenas para clientes e fornecedores mas também para os seus colaboradores, onde tudo começa. Eles dão a cara pela empresa todos os dias e espelham o que é a F.Fonseca. Os colaboradores mais antigos da F.Fonseca são os irmãos Carlos e Óscar Gonçalves, mas esta empresa tem um historial riquíssimo de antiguidade, o que significa que as pessoas são verdadeiramente felizes. Chegado ao momento da última distinção da noite, a categoria de colaborador mais antigo, foi convidado a subir ao palco outro membro da administração, Sr. Óscar Gonçalves, que entregou o prémio ao colaborador Hernâni Rodrigues, que entrou para a F.Fonseca no dia 12 de janeiro de 1987, há 32 anos. Parabenizou-o por todos estes anos de dedicação e reconheceu-o como uma pessoa detentora de um conhecimento notável, que cresceu e fez crescer a F.Fonseca.   Corte do bolo Vividas emoções e recordações, próprias destes momentos, seguiu-se o momento mais simbólico e aguardado de qualquer aniversário, o corte do bolo! Mas este momento não veio só! Irromperam pelo salão de jantar as bailarinas ledwings que incentivaram os os convidados a segui-las para um espetáculo no exterior do palácio. A este espetáculo de bailado seguiu-se um outro cheio de luz e cor com a apresentação da empresa passada, através de videomapping, no bolo de aniversário! Uma surpresa para todos os presentes finalizada com um brinde e fogo de artificio.   A tenda iluminada sobre o lago foi o cenário perfeito para a festa que decorria no seu interior. Entre dj, músicos, fotografias instantâneas e muita animação, os convidados mais resistentes alongaram-se pela noite dentro neste convívio proporcionando um ótimo ambiente e refletindo o verdadeiro espírito de alegria que se vive na F.Fonseca.   Parafraseando novamente as palavras do Presidente do conselho de administração da F.Fonseca “à excelência da nossa equipa gostaria de destacar a excelência e importância dos nossos Parceiros, Clientes, Fornecedores e demais parceiros da sociedade civil que são absolutamente cruciais para a existência e crescimento da nossa organização. A todos quero agradecer sincera e vivamente por toda a confiança, exigência e profissionalismo que nos tornam mais fortes, bastante mais notáveis e reconhecidos.   Obrigado, a todos, por fazerem parte na nossa História!” Nos dias seguintes muitas foram as mensagens de agradecimento que chegaram à F.Fonseca, a estas, de forma sentida, a resposta continuou a ser a mesma: Um agradecimento genuíno e a promessa de fazer cada vez mais e melhor sempre em prol do crescimento de todos os envolvidos.
read more
24 May 2019

Electrical safety tester for electrical vehicle battery chargers from Metrel

F.Fonseca presents electrical safety tester for electrical vehicle battery chargers from Metrel   The A 1532 EVSE adapter is a special accessory intended for testing Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers. It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. If used together with the MI 3152 EurotestXC’s AUTO SEQUENCE®, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.
read more
24 May 2019

Compact industrial PC UNO-2362G from Advantech

F.Fonseca presents compact industrial PC UNO-2362G from Advantech   It’s a computer with great performance due to its 1.0GHz Dual Core CPU and RAM to its 2GB memory. Still offers 2 Ethernet interfaces, HDMI port, RS-232 and RS-485 port.   It is a fanless machine that allows operation at temperatures from -20 º C to 60 º C under vibration up to 5Grms and against shock up to 50G. Moreover this computer has a video card AMD Radeon DirectX 11 with 2D/3D accelerator to meet the most demanding graphic applications.  One of the great advantages of UNO-2362G, considering its small dimensions, is the idoor that consists of two full-size 2.0 mPCIe which may optionally bear several options which include mSATA slot, SIM card for communication 3G/GPS/WiFi, FieldBus card / Profibus / CANopen additional RS-232/422/485 ports on DB9 or DB37 and a card with 16DI acquisition and 8DO.
read more
13 May 2019

WISE-4220 Wi-Fi IoT WSN with built in temperature and humidity sensors from Advantech

F.Fonseca presents WISE-4220 Wi-Fi IoT WSN with built in temperature and humidity sensors from Advantech The WISE-4220 series is an Ethernet-based wireless IoT device, integrated with IoT data acquisition, processing, and publishing functions.   As well as various I/O and sensor types, the WISE-4220 series provides data pre-scaling, data logic, and data logger functions. These data can be accessed via mobile devices and be published to the cloud with security at anytime and anywhere.
read more
24 May 2019

New ADT 286 multifunction reference thermometer from Additel

F.Fonseca presents new ADT 286 multifunction reference thermometer from Additel   The ADT 286 is industry-first. Additel combined for the first time a high-capacity benchmark thermometer with 8.5-digit multimeter functionality. The ADT 286 can read and record 82 temperature channels at 10 channels per second. The user can easily configure the equipment to perform field calibrations or uniformity tests, as well as a precision laboratory thermometer or 8.5-digit multimeter. The base unit comes with two precision reading channels that can be used to measure SPRT. Modules capable of measuring 10 RTD's, PRT's or thermistors and 20 thermocouples each can be added. The expansion can be made up to 82 channels.
read more
13 May 2019

Switching automation light grids FlexChain from SICK

F.Fonseca presents switching automation light grids FlexChain from SICK The flexible and efficient detection system in one chain. The FlexChain is a flexibly configurable light grid thanks to the sequential connection of several sensors. There is no need for long connection cables or complex wiring.   By pressing a button on the FlexChain Host, the sensors can be addressed and taught-in automatically, meaning the system is immediately ready for use. Different sensor technologies can be combined and freely arranged: Through-beam photoelectric sensors, photoelectric sensors. The raw sensor data is evaluated via the FlexChain Host with integrated logic modules or forwarded directly via IO-Link, CANopen, RS-485 or I/O signals. Detailed diagnostic information ensures optimum process stability and measurement certainty during operation.
read more
13 May 2019

Anybus PROFINET to .NET gateway - Anybus® from HMS

F.Fonseca presents anybus PROFINET to .NET gateway - Anybus® from HMS The Anybus PROFINET to .NET gateway enables factory-floor data from PROFINET to be presented to .NET applications. As a .NET programmer, you can get data directly from a PLC system and use this data in applications for statistics, analysis or maintenance. The gateway can be used with a wide range of use cases, from simple transfer of KPI values, advanced messages with structured data types, or ultra-fast transfer of I/O data for “big data.” The KPI mode is designed for sending a limited set of parameters (typically KPI values) from the PLC to the .NET/C# environment. Everything is pre-configured and with a minimum of steps it is possible to start receiving KPI data values from the PLC. The Structured Data Event Mode, the structured data types (such as recipes) are sent to and from the PLC and presented to the C# programmer as events or post methods. The programmers agree on a list of parameters (names, direction and datatypes) and the system automatically generates a high level C# interface and PLC configuration files. The information exchange between the Operational Technlogy (OT) side and the Information Technology (IT) side is defined in a spreadsheet template. The HMS code generator will then automatically create a customized high level C# API (events and Post methods) that is easy to integrate directly into your .NET application. At the same time, a customized GSDML file is created that simplifies the integration in the PLC. 
read more
7 May 2019

Fixed gas oxigen analyser IN SITU ZIRKOR200 from SICK

F.Fonseca presents fixed gas oxigen analyser IN SITU ZIRKOR200 from SICK Already has the innovation in the cells!   SICK'S ZIRKOR200 gas analyzer provides very robust, reliable, and suitability-tested oxygen measurement for small and large combustion plants. The ZIRKOR200 is characterized by a measurement cell with a particularly long service life. The long-life technology employed for this purpose increases the resistance of the measurement cell in corrosive and reducing conditions in particular. The integrated measurement cell monitoring system and fully automated adjustment significantly reduce the maintenance effort. The ZIRKOR remote app allows you to wirelessly access the analyzer quickly and easily. The ZIRKOR200 provides a low-maintenance, simple oxygen measurement system for incineration optimization. Thanks to its suitability test as per EN 15267, it is also suitable for emission monitoring.
read more
17 April 2019

PME Excellence 5th consecutive year!

F.Fonseca distinguished as PME Excellence for the fifth consecutive year!   Once again the bearer of the SME Excellence certificate, F.Fonseca renews its status as a year of celebration of its 40th anniversary. The key to success for this growth is a strong focus on employee qualification and commitment, relationships with suppliers and customer loyalty. This is only possible if there is also quality in products and services and of course financial soundness. There are other complementary factors, but these are the ones we consider central to success. Allied to these principles, F.Fonseca also carries the quality assurance system, in accordance with the NP EN ISO 9001: 2015 standard granted by APCER.  
read more
12 April 2019

New dry well calibrator ADT875-155 from Additel

F.Fonseca presents new dry well calibrator ADT875-155 from Additel With this calibrator Additel enters in the temperature calibration world. It combines excellent stability, radial and axial uniformity, quickly. With the PC option we add the 3-channel temperature reading capabilities with a process calibrator. The calibrator has a range of use of -40 to 155ºC, resolution of 0,01ºC, precision of ± 0,18ºC and stability of ± 0,01ºC in full scale. The Process Calibrator (PC) option combines the many functions of a HART Process Calibrator with a Temperature Calibrator. With this option we have the ability to read a reference RTD plus 2 channels of signal mA, V, switch, RTD or thermocouple. In addition, the calibrator allows you to create tasks and HART communication. Let’s you capture screen images for future needs with the one touch of a button. Using a reference RTD it is possible to control the calibrator by the reference probe or the internal probe. Calibration tasks can be programmed and recorded to facilitate the field calibration work, and the calibrator can be controlled remotely.  
read more
Page 3 of 8
View
  • 0
  • 1
We use our own and third-party cookies to offer you a better experience and service. To know which cookies we use and how to disable them, read the cookies policy.
By ignoring or closing this message, and unless you have disabled cookies, you agree to its use on this device.