Home
Online store
Probe configurator
Contacts

Magnetic level sensors for liquids, Series M - Kobold

Magnetic level sensors are used for the monitoring and control of liquid levels in vessels and manufactured according to every customer specification.
 
Kobold magnetic float sensors are fitted with a hermetically sealed contact which is situated in the tube;
The float sliding on the tube contains a whose magnetic field sensor the sealed contact in a non-contacting fashion. The sealed contacts are available as N/O, N/C or changeover contacts;

The float sliding up and down on the liquid is the only moving part in the Kobold magnetic float sensors.
 
View detail

Mass flowmeter-thermal KMT - Kobold

The flowmeter of the series KMT, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of compressed air and gases in pipes with sizes from DN 15 ... DN 700. Measurement of for instance the usage of compressed air, nitrogen, CO 2 or other non-corrosive gases. The KMT is setting new standards in terms of measurement accuracy and reproducibility thanks to its application specific adjustment during production.
 
This flowmeter is adjusted under a pressure of 7 bar (abs) (DN 15 ... DN 50) or 9 bar (abs) (DN 65 ... DN 700). Adjusting the device specifically for its application has the advantage of keeping the actual flow speed in the pipeline low even with very large flow quantities. Thanks to the more stable flow profile, this low flow speed facilitates a much better degree of reproducibility and accuracy than if the device were adjusted conventionally under normal pressure, as flow speeds up to 200 Nm/s can often no longer be controlled under conventional adjustment pressures.
 
View detail

Multichannel process controller / Program controller IMAGO 500 - Jumo

The Jumo IMAGO 500 is a process controller and programmer with up to 8 control channels or 4 programming channels.
 
The IMAGO 500 is built for the 144x130mm format for a standard panel cut of 92x92mm and a mounting depth of 170mm.
The 5-inch touch-screen display has 27 colors. The layout of the display models can be adjusted individually. Two freely configurable display models allow to be customized for text placement, process values, background images and icons.

The controller has up to 8 analog inputs and 6 logic inputs as well as 6 expansion slots for analogue or switched outputs. Four of these slots can be used alternately for analog inputs or outputs.
 
View detail

Orifice plate and Orifice flange KPL - Kobold

If a pipeline (through which a medium flows) is reduced at a particular point by a cross-sectional constriction, the flow speed of the measured medium is increased at that point. According to Bernoulli’s energy equation and the law of continuity, the total flow head (dynamic velocity head and static pressure head) is constant. The increase in speed at the constriction causes a reduction in the static head.
 
The resulting pressure drop is called the differential pressure head; it is a measure of the flow (volume per unit of time or mass per unit of time). The flow rate q is given by: q = c√∆p The flow rate (q) is a function of the square root of the differential pressure head (∆p), where c is the coefficient of flow rate determined by the shape of the differential  pressure transducer and the operating data. The pipeline may be constricted with orifice plates.
 
View detail

Oval wheel flowmeter for low and high viscous liquids DON - Kobold

Needing minimum space.
The robust oval gear flow meter of DON series from Kobold is optimally designed for measuring flow rates of viscous fluids. It is used to monitor or dose lubricants, pastes, or oils, as well as measure flow rates of water, various chemicals, and even fuel. It covers a viscosity range of 0 to 1000 cP as standard.
 
The oval wheel meters are positive displacement flowmeters where the passage of liquid causes two oval gears to rotate within a precision measuring chamber and with each rotation a fixed volume of liquid passes through the meter. Magnets embedded within the gears initiate a high resolution pulse train output. The pulse output can be wired directly to process control and monitoring equipment or can be used as an input to instruments supplied with or fitted directly onto the meter.
 
View detail

Paperless recorder logoscreen 600 with touch screen – Jumo

The Jumo logoscreen 600 paperless recorder features a resistive touchscreen and an intuitive, icon-based operation and visualization concept that makes it very easy to use.
 
Paperless recorder logoscreen 600 with touch screen from Jumo has six measuring inputs (universal analog inputs), two analog outputs, 12 digital inputs and 12 individually switchable digital inputs/outputs. Logoscreen 600 can display data using the default visualizations, such as curve diagram (vertical or horizontal), bar graph, text image (numerical), or digital diagram. In addition, users can create up to six individual process screens with up to 100 objects per process screen to fit their requirements using the setup program.


 
View detail

Paperless recorder Logoscreen NT/FD - Jumo

Logoscreen nt represents a new generation of Jumo paperless recorders.
 
Jumo Logoscreen NT/FD from Jumo represents a new generation of Jumo paperless recorders. They are characterized by their modular concept for measured data recording (3 to 18 measuring inputs are possible internally), by their innovative operating concept, as well as by their high standard of safety with regard to access control and protection of the saved data against tampering. In the Logoscreen NT data can be visualized as a measured value curve, as a bar graph, or in alphanumerical form on process screens. High-performance PC programs are available to evaluate archived data and to configure the Logoscreen NT.

 
View detail

Plastic level switch for liquids NKP - Kobold

The plastic level switch NKP is designed for economical control of liquids in vessels. Many industrial applications can be realized with two different plastic versions each with three different mountings. The switch is remarkable for its maintenance-free design, small dimensions and reed contacts with high switch capacity.
 
The switch is mounted on the side of the vessel. A hinged plastic float with a magnet floats up and down through the liquid level. The encapsulated reed contact is operated by the magnet. The switching function (N/O contact / N/C contact) is determined by the installation position. The switching function is reversed by simply rotating the switch through 180°.
 
View detail

Portable measuring system thermoCOR - Jumo

thermoCOR is Jumo’s new portable temperature measurement system for the AMS2750 and CQI-9 standards.
 
thermoCOR is a portable temperature measurement system designed for the execution of SAT (System Accuracy Tests) and TUS (Temperature Uniformity Surveys) tests, according to the AMS2750 (aeronautical industry) and CQI-9 (automotive industry). The thermoCOR is DAkkS certified.

At its core is a high precision cold junction, the equipment has up to 12 configurable inputs for thermocouple and 4 universal inputs that allow the connection of RTD probes or pressure sensors.
 
View detail

Pressure transmitter DELOS HP - Jumo

The DELOS HP is Jumo’s precision pressure transmitter with switching contacts and display.
 
The DELOS HP high-precision electronic pressure switch with analogue output is predestined for use on test benches, with laboratory equipment, and for construction of special machines. These areas frequently demand precise measurement and a configuration adapted to the measurement task.

The stainless steel sensor welded to the process connection features a high burst safety, which is in part as much as 5x the measuring range. Consequently, the plant is reliably protected against medium leaks in the event of a malfunction.
 
View detail

Pressure transmitter Midas C08 - Jumo

Basic OEM pressure transmitter.
The new pressure transmitter Midas C08, is the standard sensor, designed to correspond almost all industrial aplications, like machines, compressors, pneumatics and industrial system applications.

The main requirement of OEM pressure measuring instruments like this is unlimited functionality and availability over many years and decades, without the need for maintenance. Outstanding long-term stability is a highly significant factor in justifying this claim. Thanks to its new, patented sensor technology, JUMO has been able to improve by 100 % the customary long-term stability of comparable market products.

The exceptional vibration performance – 2.5 times as high as the industry standard – also makes sure that the product will be ready to use for many years to come. The temperature compensation range is a remarkable –20 to +100 °C, thus ensuring outstanding measuring accuracy in the operative temperature range of –30 to +125 °C.
The diagnostic functions integrated in the circuit provide safe error detection within the system.

 
View detail

Pressure transmitter with ceramic element SEN-96 - kobold

The Kobold SEN-96 standard model is an electronic transmitter with ceramic sensor for air, industrial, technical gases, water and oil, designed to be installed in gas distribution plants, on bottles, on refrigerators, on compressors, on vacuum pumps and hydraulics and water high pressure plants.
 
The Kobold SEN-96 Series pressure transmitters combine the reliability of a solid-state ceramic sensor with a very economical price. These pressure transmitters are available in an accuracy class of ≤ ±1.0% of range with a standard 4-20 mA, 2-wire analog output, allowing the SEN-96 pressure transmitter to interface with most modern control systems. Optional voltage outputs are available. The heart of the SEN-96 pressure transmitter is a ceramic piezoresistive pressure-sensing element.
View detail

Process Controler / Programer DICON touch - Jumo

Jumo's DICON touch is a two-channel universal processor and program controller that displays information on a vibrant screen. The device is easy to operate thanks to the touch screen display.
 
Both DICON touch control channels use the Jumo control algorithm with two possible optimization options. These allow simple and highly accurate initialization. Allows multiple zone control, cascade control or other complex control tasks.

Four analog universal inputs and up to eight external inputs can record a variety of measured physical values ​​with high accuracy. Actuators can be controlled directly on the device with an analog or digital configuration. These can be expanded through external digital outputs. Interfaces such as Modbus (master/ slave), PROFIBUS, PROFINET-RT or Ethernet with web server can be used for communication with higher order systems.

 
View detail

Process controller IMAGO F3000 - Jumo

IMAGO F3000 is a process controller specially developed for the control and regulation of the maturation, cooking, smoking and air conditioning process in the meat processing industry.

The IMAGO F300 are built to a modular design and are suitable for the control and regulation of cooking, smoking and climate-control installations, and all associated equipment such as smoke generators, catalyzers etc. They are available in both upright (portrait) and horizontal (landscape) formats.
View detail

Recorder Logoscreen 700 - Jumo

The Logoscreen 700 is the new highly scalable Jumo process recorder.
 
The Jumo Logoscreen 700 paperless recorder features an intuitive icon-based operation and visualization concept that makes operation easier. Several versions of Jumo Logoscreen 700 are available for process data recording. The high level of scalability allows a flexible adaptation to the various customer requirements: from the logger version without input (120 process values ​​via interface) to different versions of registers with up to 18 universal analogue inputs, 3 analogue outputs, 18 digital inputs, 24 individually selectable digital inputs/outputs and 7 relay outputs. The FDA compliant data recording version meets all requirements in accordance with 21 CFR Part 11.
 
View detail

Single-Phase thyristor power controller TYA-201 - Jumo

Jumo’s TYA 201 is a single-phase power controller for the control of resistive and inductive loads.
 
The Jumo TYA 201 represents the consistent development of power control technology.

All parameters of the control microprocessor are visible on the LCD display and can be accessed via the 4 front keys. TYA 201 thyristors for load currents up to 32A can be DIN rail mounted or wall mounted with appropriate mounting plate. Depending on the configuration in the program, the power controller thyristors operate in phase angle mode, with adjustable current limitation or in burst mode.
 
View detail

Temperature and pressure sensors with IO-Link – Jumo

The long stopping times belong to the past. The new JUMO temperature and pressure sensors with IO-Link use the integrated diagnostic function to better plan the availability or exchange of sensors.
 
Flexibility, production process optimization and remote maintenance are important performance parameters for machines or manufacturing facilities. The sensors with IO-Link give the operator access to the most basic field level. The effort to recover information, parameterization and diagnosis of the sensors is minimal, so that the evaluation of the conditions of the equipment is ideal.

The efficient IO-Link point-to-point communication is based on the well-known three-wire sensor connection. The IO-Link is a serial and bidirectional point-to-point connection for signal transmission and power supply in any number of networks, field or support.
 
View detail

Temperature/humidity transmitter for critical applications testo 6681

Industrial humidity measurement requires absolute professionalism in measuring and control technology. In industrial processes or in research-based business, the testo 6681 temperature and humidity transmitter is ideal wherever critical climatic values need to be maintained.
 
Precise measuring and control technology will help you to accurately optimize the climatic conditions in your rooms in order to prevent process disruptions and quality losses. Automation systems result in particularly efficient processes. The testo 6681 temperature and humidity transmitter can easily be integrated into individual automation systems because it features Ethernet, relay and analog outputs.
 
View detail

Three-Phase thyristor power controller TYA 203 - Jumo

The Jumo TYA 203 is the result of consistent development of Jumo power controller technology and switches resistive and resistive/inductive loads (transformer) via a three-wire circuit.
 
The TYA 203 enables the wiring of the load in a star connection (with and without N conductor) or a delta connection. An open delta connection (six-conductor connection) can also be implemented. The microprocessor controlled power controller displays all parameters in an LCD display with background lighting and it can be operated using the 4 keys at the front.

Thyristor power controllers are used where larger resistive and ohmic-inductive loads have to be switched (e.g. in industrial furnace construction and plastics processing). The thyristor power controller with a load current of 20 A can either be clipped to a 35 mm mounting rail or fitted to the wall on a mounting plate. Devices with a load current greater than 20 A can only be mounted on the wall.
 
View detail

Thyristor power switch - TYA 432 - Jumo

Thyristor power switches are required for contactless switching of alternating current consumers.
A typical application is the switching of ohmic-inductive loads at a high switching frequency.
Jumo presents an improved series of semiconductor contactors with a new look and compact design type, it is specially designed for use in smaller control cabinets.

This product applies especially to the industrial sector in areas such as the plastic packaging industry, air conditioning and heat technology and industrial furnace construction.
The control and power sections are galvanically isolated by optocouplers. The control signal area is compatible with the logic outputs of the JUMO controllers.
The input status is indicated by a green LED.
 
View detail

Titanium Level Probe MAERA S29 SW - Jumo

This latest innovation is especially sturdy and durable as it is designed primarily for use in salt water or water that contains chloride in maritime applications or in swimming pool technology. The device is also designed for potentially explosive areas.

The chemically high-resistant titanium design and the intrinsically safe ATEX approval allow the probe to be used in difficult environmental conditions.
The level probe has a medium-separated, piezo-resistive measuring system with front-flush membrane. It stands out due to its optimum moisture and vibration protection.
 
View detail

Ultrasonic flowmeters – Detectronic

Ultrasonic water Flow Meters that are easy to operate, built for durability and deliver top performance.

All liquids have different characteristics such as pressure, temperature, conductivity, composition and viscosity. There are several types of flow meter available including magnetic, vortex and Coriolis. Detectronic specialises in the development of Ultrasonic water flow meters.
 
View detail

Ultrasonic gas meter FLOWSIC500 - SICK

The cutting-edge technology for ultimate measurement accuracy: The new FLOWSIC500 ultrasonic compact gas meter from Sick enables highly accurate metering in natural gas distribution. In absence of mechanical moving parts, the FLOWSIC500 is a robust, fail-safe and low-maintenance device - allowing for a significant reduction in operating costs. It is overload-proof, accurate and is monitored by an intelligent diagnostics system.
 
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
 
View detail

Ultrasonic level and open channel flow meter NUS-4 - Kobold

The Kobold ultrasonic level meter, model NUS-4, is used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels. Level measurement technology based on the non-contacting ultrasonic principle is especially suited for applications where, for any reason, no physical contact can be established to the surface of the material to be measured.
 
Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials). The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to make a round trip from the sensor to the level to be measured and back.
 
View detail
Page 2 of 3
View
  • 0
  • 1
We use our own and third-party cookies to offer you a better experience and service. To know which cookies we use and how to disable them, read the cookies policy.
By ignoring or closing this message, and unless you have disabled cookies, you agree to its use on this device.