Test, measurement & calibration

Dry block calibrator TE-1200P- Presys

The Presys TE-1200P dry-block calibrator shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from 50ºC to 1200ºC, with an accuracy of ±3.8ºC, stability of ±0.3ºC and resolution of 0.01ºC.
 

Dry block calibrator TE-350P- Presys

The Presys TE-350P dry block calibrator shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from room temperature to 350ºC, with an accuracy of ±0.131ºC + 0.13% reading, stability of ±0.05ºC and resolution of 0.01ºC.
 
 

Dry block calibrator TE-650P- Presys

The TE-650P block calibrator from Presys shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from room temperature to 650ºC, with an accuracy of ±0.13ºC + 0.13% of reading, stability of ± 0.1ºC and resolution of 0.01ºC.
 

Dry well calibrator ADT875-1210 - Additel

ADT875-1210 is the new dry block calibrator from Additel for temperatures up to 1210ºC. With this calibrator, Additel reinforces its line of dry block calibrators. It combines excellent stability, radial and axial uniformity, with speed. With the PC option was added the ability to read 4 temperature channels with a process calibrator. In the higher precision
ADT878 series, the values of axial and radial accuracy and uniformity improve in order to obtain reference performances in the calibration of thermocouples.
 

Dry well calibrator ADT875-155 - Additel

The ADT875-155 is the new dry block calibrator from Additel. With this calibrator Additel enters in the temperature calibration world. It combines excellent stability, radial and axial uniformity, quickly. With the PC option we add the 3-channel temperature reading capabilities with a process calibrator.



 

Electrical installation safety tester MI 3152 Eurotest XC - Metrel

MI 3152 EurotestXC is an instrument from the new generation of Metrel’s multifunctional measuring instruments.
 
The already well known functions like complete installation safety testing according to IEC/EN 61557 and auto sequence testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large color touch screen display. A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement up to RCD tests, line and loop impedance tests and earth resistance measurements.
 

Electrical installation safety tester MI 3155 Eurotest XC – Metrel

Are you prepared for the mandatory inspection of electrical installations?

The Directive 2005/36/CE and 2006/123/CE were fundamental to create the new Portuguese law no. 96/2017 entered into force in January 2018, making it necessary to update many old electrical installations and inspect them, not only due to the new law, but also due to the deterioration of their quality and safety.

For this purpose F.Fonseca sells instruments from Metrel as the new model MI 3155, which allows carrying out all the required tests by the directive.  

Electrical photovoltaic (PV) tester MI 3109 - Metrel

Metrel MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations.
 
This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.
 

Electrical safety tester for electrical vehicle battery chargers - Metrel

The A 1532 EVSE adapter is a special accessory intended for testing Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers.

It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. If used together with the MI 3152 EurotestXC’s AUTO SEQUENCE®, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.
 

Electrical safety tester MI 3110 - Metrel

The best tool for IT earthing systems with the MI 3110.
The IT earth systems are used in places where ground faults cannot disconnect power to the equipment, such as operating rooms, medical transportation, fire trucks, among others.
 
Two of the most common faults in electrical circuits are overheating of conductors due to excessive heat dissipation or even by insulation faults in system components and very high voltage in existing conductive parts of the equipment.
When there are faults detected in the earth IT systems one device IMD (" Insulation Monitoring Device") only triggers an alarm which allows corrective maintenance to be done when the system can be switched off outside the normal period of use.
This maintenance can be done with the MI 3110, specifically developed to solve this type of faults with various optional accessories.
 

Electrical tester EurotestXE MI3102 - Metrel

EurotestXE is a typical representative from a new line of Metrel´s installation safety testers.
 
Key advantages like a lightweight design and small dimensions are completed with extensive measurement features.
This equipment for electrical installation safety tests has a clear, fast and easy user friendly interface.

 

Electrical tester MI 3105 - Metrel

Multi-function test instrument, model MI 3105 EUROTEST XA.
The fifth generation of Metrel’s multifunction installation testers brought know-how in the testing procedures to reality.
 
Because of the need to be efficient, faster and competitive but still responsible and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE ®, rotate around taking care about testing procedures itself.
 

Electrical tester MI 3108 - Metrel

Combined photovoltaic tester and electrical installations safety tester model MI 3108 Eurotest PV.
It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations.
 
The instrument allows all the tests as required by EN 62446, but also includes I - U characteristic, calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety, the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.
 

Electrical tester MI 3125 BT EurotestCOMBO - Metrel

MI 3125 Eurotest Combo from Metrel is the appropriate instrument for the installation safety testing on TT and TN systems.
The bright graphic display with backlight ensures that results, indications, measurement parameters and messages are clear, visible and easy to read. The red and green
LEDs on either side of the display provide a clear PASS / FAIL evaluation of test results. The Electrical tester MI-3125 Eurotest Combo contains integrated characteristics of fuses and RCDs for the automatic evaluation of the line / loop impedance results.
 
The handling of the instrument is designed to be as simple and clear as possible. Each test has its own individual help screen describing how to connect the instrument into the installation and how to perform a measurement.
 

 

Electrical tester MI 3325 MultiServicer XD - Metrel

The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must.
 
In Metrel range of the instruments it is introduced as a successor of MI 3321 MultiServicerXA. The new platform integrated in the MI 3325 MultiServicerXD features support for colour touch screen technology, advanced memory organizer including large SD memory card storage media and state of the art AUTOSEQUENCE®s.
 

Electrical tester MI 3394 CE MultiTester XA - Metrel

The MI 3394 CE MultiTesterXA from Metrel is a portable instrument intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during the production.
 
The PC software MES-Manager enables the upload of automated test sequences, projects, downloading of test results to the PC, automatic data storage into a file and printing of test reports. Due to selected test functions, durable construction and accompanying PC SW package CE MultiTesterXA is the perfect instrument for electrical safety testing in the most demanding environments like laboratories, automated production lines or specialized workshops.
 

High temperature furnace TA-1200PLAB - Presys

The TA-1200PLAB is a high-temperature, high-volume laboratory furnace. With above-class uniformity and stability, it will dramatically reduce uncertainty in your thermocouple calibrations.
 
The TA-1200PLAB has 3 control zones. This segmentation makes this furnace a reference in terms of precision and homogeneity. With this control, we have better temperature distribution across the block and thus ensure uniform radial and axial uniformity throughout the 100mm measuring zone.

Hydraulic pressure calibration pump (oil-free) ADT938 - Additel

The 938 hydraulic high pressure test pump is specially designed for calibrating oil-free pressure measuring instruments in the range of 85% vacuum to 15,000 psi (1,000 bar). All parts used in the pump have been carefully cleaned to remove oil.
 
The pump uses water as the media. With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly. A specially designed shut-off valve makes the pressure as stable as possible during calibration. With no check valve (non-returning valve), the 938 avoids the troublesome leakage issues that is usually experienced with hand pumps and allows for minimal maintenance. Three hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 938 is an ideal comparison test pump for calibrating oil-free pressure measuring instruments such as test gauges, indicators or transducers in the laboratory.
 

Hydraulic pressure test pump 927 - Additel

Additel 927 Hydraulic Pressure Test Pump Oil/Water: -12.5 psi to 10,000 psi.
The 927 hydraulic pressure test pump from Additel, is a hand operated pressure pump designed to generate pressure from 85% vacuum to 10,000 psi (700bar).
 
With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly. With no check valve (non-returning valve), the hydraulic pressure test pump from Additel avoids the troublesome leakage issues that is usually experienced with most hand pumps and allows for minimal maintenance. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 927 is an ideal comparison test pump for calibrating pressure measuring instruments such as test gauges, indicators or transducers in the field or laboratory.
 

Hydraulic ultra-high pressure calibration pump ADT949 - Additel

Nowadays almost industries have pressure manometers, transducers and switchs that need to be calibrated or verified. For this purpose we need high accuracy standards to compare with and register the deviation. These standards can be used in the field handheld or in the lab bench.

The 949 hydraulic ultra-high pressure test pump is a hand operated pressure pump designed to generate pressure up to 40,000 psi (2,800 bar).
A specially designed shut-off valve makes the pressure as stable as possible during calibration. The 949 is an ideal comparison test pump for calibrating ultra-high pressure measuring instruments such as test gauges, indicators or transducers in the laboratory.
 

Infrared calibator T-500PIR - Presys

The T-500PIR is the ideal tool for the calibration of infrared sensors. 
With a temperature range from ambiente to 500ºC, teh T-500PIR alows you to test and calibrate of most ifrared thermometers in the industry.
The large 80mm target, with excelente temperature uniformity on the whole surface, garantees the necessary area for calibrations.
 

Infrared thermometer calibrator T-30NIR-H- Presys

The T-30NIR-H calibrator is the ideal tool for the calibration of infrared sensors for measuring body temperature.
 
With a temperature range of 20º to 45ºC, the T-30NIR-H facilitates the calibration of infrared thermometers, given that the temperatures generated are close to the temperature of the human body. You have the possibility to work with an external sensor, which allows you to change the accuracy from ± 0.1ºC to ± 0.05ºC and thus add accuracy to your calibrations. The resolution is ± 0.01ºC and the stability is ± 0.1ºC. The 80mm target guarantees an emissivity of 0.98 (± 0.01).
 

Laboratory calibration furnace ADT850-1200 - Additel

The Additel ADT850-1200 thermocouple calibration furnace, with a temperature range from 300°C to 1200°C, is the answer for anyone looking to save time, costs and space in their calibration laboratory.
 
The demands of thermocouple calibration and the number of equipment required led to the development of the ADT850-1200, which combines the functionality of 3 furnaces in one piece of equipment. The user can choose optimized settings for short probes, longer probes and even for annealing purposes.

 
Page 2 of 4
View
  • 0
  • 1