Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Driver assistance systems Backup Assistance System - SICK
The Backup Assistance System (BAS) from SICK minimizes the risk of collisions for manned forklift trucks. It monitors areas of the vehicle which are obstructed from view of the driver.
The BAS gives real-time feedback via visual and audible warnings when the forklift truck comes near a stationary or moving object. The compact system is based on a TiM3xx 2D LiDAR sensor that is engaged only when the forklift truck is in reverse, thereby eliminating false alarms when moving forward. The monitored area can be scaled up by adding an additional sensor.
The BAS gives real-time feedback via visual and audible warnings when the forklift truck comes near a stationary or moving object. The compact system is based on a TiM3xx 2D LiDAR sensor that is engaged only when the forklift truck is in reverse, thereby eliminating false alarms when moving forward. The monitored area can be scaled up by adding an additional sensor.
Dry Block Calibrator TA-650P - Presys
The TA-650P calibrator performs functions where three different instruments are required: dry block thermal bath, standard thermometer and calibrator for TCs, RTDs, mA, mV, ohms and thermostats. Besides these functions, they have HART® communication protocol, data logger mode, Ethernet interface and USB.
The new advanced line temperature calibrators are the result of more than 20 years of experience in the manufacture of dry block gauges.
Sensor calibration has never been easier thanks to the user-friendly touch-screen display. Enables rapid calibration test report retrieval without the need for specific software installation.
The new advanced line temperature calibrators are the result of more than 20 years of experience in the manufacture of dry block gauges.
Sensor calibration has never been easier thanks to the user-friendly touch-screen display. Enables rapid calibration test report retrieval without the need for specific software installation.
Dry block calibrator TE-1200P- Presys
The Presys TE-1200P dry-block calibrator shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from 50ºC to 1200ºC, with an accuracy of ±3.8ºC, stability of ±0.3ºC and resolution of 0.01ºC.
Dry block calibrator TE-350P- Presys
The Presys TE-350P dry block calibrator shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from room temperature to 350ºC, with an accuracy of ±0.131ºC + 0.13% reading, stability of ±0.05ºC and resolution of 0.01ºC.
Dry block calibrator TE-650P- Presys
The TE-650P block calibrator from Presys shows that excellent performance at a reduced cost is possible, offering features that can only be found in competing models of much higher cost. Robust and compact, it generates temperatures from room temperature to 650ºC, with an accuracy of ±0.13ºC + 0.13% of reading, stability of ± 0.1ºC and resolution of 0.01ºC.
Dry well calibrator ADT875-1210 - Additel
ADT875-1210 is the new dry block calibrator from Additel for temperatures up to 1210ºC. With this calibrator, Additel reinforces its line of dry block calibrators. It combines excellent stability, radial and axial uniformity, with speed. With the PC option was added the ability to read 4 temperature channels with a process calibrator. In the higher precision
ADT878 series, the values of axial and radial accuracy and uniformity improve in order to obtain reference performances in the calibration of thermocouples.
ADT878 series, the values of axial and radial accuracy and uniformity improve in order to obtain reference performances in the calibration of thermocouples.
Dry well calibrator ADT875-155 - Additel
The ADT875-155 is the new dry block calibrator from Additel. With this calibrator Additel enters in the temperature calibration world. It combines excellent stability, radial and axial uniformity, quickly. With the PC option we add the 3-channel temperature reading capabilities with a process calibrator.
Dual-channel reference thermometer ADT282 - Additel
Additel’s ADT282 reference thermometer readout delivers the best possible accuracies and features in the palm of your hand!
With precision capability on par with laboratory thermometers, the ADT282 is capable of handling the most demanding measurements. The dual-channel analog design makes it easy to compare ultra-accurate measurements and meets all your temperature measurement needs.
The easy-to-use touch screen makes navigating between menus very fast, providing a very pleasant user experience. Lemo-style smart plugs ensure that all calibration information for your probes is always available.
With precision capability on par with laboratory thermometers, the ADT282 is capable of handling the most demanding measurements. The dual-channel analog design makes it easy to compare ultra-accurate measurements and meets all your temperature measurement needs.
The easy-to-use touch screen makes navigating between menus very fast, providing a very pleasant user experience. Lemo-style smart plugs ensure that all calibration information for your probes is always available.
Dust monitor in wet flue gas FWE200DH - SICK
Reliable dust measurement in wet gases.
The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a sampling probe and heated above dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables even very low dust concentrations to be measured.
The FWE200DH meets the requirements of EN 14181 and EN 15267.
The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a sampling probe and heated above dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables even very low dust concentrations to be measured.
The FWE200DH meets the requirements of EN 14181 and EN 15267.
Dust monitor with two measuring principles DUSTHUNTER SP100 - SICK
Exhaust gases from cement production or similar applications are usually loaded with dust particles. Environmental protection legislation requires that the dust is removed before the gas is released into the atmosphere.
The SICK dust monitor DUSTHUNTER SP100 measures even low dust concentrations and thus detects any filter errors. An automatic zero and reference point check is integrated to reduce the need for maintenance.
The SICK dust monitor DUSTHUNTER SP100 measures even low dust concentrations and thus detects any filter errors. An automatic zero and reference point check is integrated to reduce the need for maintenance.
DVH – Vortex Flowmeter
Our fully welded "all in one design" DVH flowmeter measures volumetric flows of fluids. Integrated temperature and pressure sensors allow to measure temperature, density, pressure and mass flow. Furthermore, the evaluation of steam thermal energy, hot or chilled water application can be implemented.
Electro-acoustic water leak detection - Aquaphon® A200 - Sewerin
The Aquaphon A200 from Sewerin is an advanced leak locator allowing the operator to finely filter leak audio frequencies and save leak audio recordings in memory. The A200 also works as a non-metallic pipe locator when used in combination with the CombiPhon noise generator.
Ideal for detecting leaks in water pipe networks
When it comes to detecting leaks in water pipes by electro-acoustic means, the hearing and experience of the user are paramount. The AQUAPHON® system supports and simplifies this detection process thanks to the outstanding quality of its microphone and measuring technology, intelligent analysis functions and the practical, visual representation of results on the display.
Ideal for detecting leaks in water pipe networks
When it comes to detecting leaks in water pipes by electro-acoustic means, the hearing and experience of the user are paramount. The AQUAPHON® system supports and simplifies this detection process thanks to the outstanding quality of its microphone and measuring technology, intelligent analysis functions and the practical, visual representation of results on the display.
Electro-acoustic water leak detection Aquaphon® A200 GNSS – Sewerin
The AQUAPHON® family is Sewerin’s professional, flexible and intelligent system for detecting leaks in water pipes.
Designed to be modular, this family offers the best conditions for a quick, simple and safe water leak detection, its elements having been designed for universal use and adapting to all electroacoustic location requirements.
Designed to be modular, this family offers the best conditions for a quick, simple and safe water leak detection, its elements having been designed for universal use and adapting to all electroacoustic location requirements.
Electro-acoustic water leak detection outdoors - AquaTest T10 – Sewerin
Robust test rod for electro-acoustic water leak detection outdoors.
The AquaTest T10 is a test rod with innovative technology and ergonomic design. Its strength lies in the prelocation of leaks in water pipe networks.
The AquaTest T10 is the first test rod made by SEWERIN for which no additional receiver is required. The headphones are activated not by any common key but by a special sensor area. The noises that are picked up are visualised on a display incorporated in the handle.
In the product variant with the SDR radio module, the test rod can be used with radio headphones. This means no more cables to get in the way.
The AquaTest T10 is a test rod with innovative technology and ergonomic design. Its strength lies in the prelocation of leaks in water pipe networks.
The AquaTest T10 is the first test rod made by SEWERIN for which no additional receiver is required. The headphones are activated not by any common key but by a special sensor area. The noises that are picked up are visualised on a display incorporated in the handle.
In the product variant with the SDR radio module, the test rod can be used with radio headphones. This means no more cables to get in the way.
Electromagnetic flow meters FLONET FH20XX - Elis Plzen
Induction flow meters/ electromagnetic flow meters are intended for industrial measurements of electrically conductive liquids in different fields of industry. Induction flow meters meet most demanding requirements on accuracy, reliability and long-term stability of measurements. Liquid flow rate measurements in both directions of flow are possible.
The liquid flow is measured in a contactless manner; the flow meter has no moving mechanical parts and the hydrodynamic conditions at the measurement location in the pipe are absolutely unaffected.
The liquid flow is measured in a contactless manner; the flow meter has no moving mechanical parts and the hydrodynamic conditions at the measurement location in the pipe are absolutely unaffected.
Electromagnetic flowmeter all metal stainless steel MIM – Kobold
The new flowmeter MIM was developed for measuring and monitoring smaller and medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow.
Electromagnetic flowmeter compact for conductivity liquids MIK - kobold
The new compact type MIK magnetic-inductive flowmeters of Kobold Messring GmbH from Hofheim have a variety of measuring ranges and are available in an incomparable range of designs.
Measuring ranges start at 0.01 l/min and currently end at 700 l/min. Six different measuring tube sizes from G ½ male to G 2 ¾ male are perfect for users with small to larged-sized measuring ranges. This device series combines the largest measuring range spectrum and the most design options with the lowest market price.
Measuring ranges start at 0.01 l/min and currently end at 700 l/min. Six different measuring tube sizes from G ½ male to G 2 ¾ male are perfect for users with small to larged-sized measuring ranges. This device series combines the largest measuring range spectrum and the most design options with the lowest market price.
Electromagnetic flowmeter MIS - Kobold
The new flowmeter MIS from Kobold was developed for measuring and monitoring medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes, which are in contact with the measuring agent.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes, which are in contact with the measuring agent.
Electromagnetic flowmeter – AMF500 | AMF601 | AMF900 - ALIA
ALIA electromagnetic flowmeter series are ideal for conductive liquids. They come in a wide range of sizes from 10mm to 2000 mm.
The electromagnetic flowmeters are widely used for sewage, industrial waste, chemical, solvent, food & beverage, drinking water, pulp & paper and many other industrial fluid.
These flowmeter series could be used in a compact or remote model with the AMC Series converter of electromagnetic flowmeters.
The electromagnetic flowmeters are widely used for sewage, industrial waste, chemical, solvent, food & beverage, drinking water, pulp & paper and many other industrial fluid.
These flowmeter series could be used in a compact or remote model with the AMC Series converter of electromagnetic flowmeters.
Electronic pressure sensor PAC50 - SICK
Turns pressure into colors.
For improved monitoring of air pressure, the PAC50 electronic pressure switch from SICK offers more at a glance – the large bi-color display allows you to identify from a distance if the pressure falls within the target range. Three large function keys and intuitive menu navigation make operating the PAC50 easy.
For improved monitoring of air pressure, the PAC50 electronic pressure switch from SICK offers more at a glance – the large bi-color display allows you to identify from a distance if the pressure falls within the target range. Three large function keys and intuitive menu navigation make operating the PAC50 easy.
Electronic thermostat eTRON T100 - Jumo
The electronic thermostat for DIN-rail mounting Jumo eTRON T100 was especially designed for temperature control and monitoring. In addition to the input signals for RTD temperature probes and thermocouples, a 0(4) to 20 mA measurement input is available for connecting other process variables.
The Jumo eTRON T100 sets itself apart with its compact size and large functional range, including an integrated timer, data logger, service and operating hours counter, PhotoMOS output for additional limit value signalling and digital input. Digital control signals can be used to create logical connections (AND, OR, XOR) which are processed internally.
The device has UL approval and also meets the railway industry standards for category 1B.
The Jumo eTRON T100 sets itself apart with its compact size and large functional range, including an integrated timer, data logger, service and operating hours counter, PhotoMOS output for additional limit value signalling and digital input. Digital control signals can be used to create logical connections (AND, OR, XOR) which are processed internally.
The device has UL approval and also meets the railway industry standards for category 1B.
EM-A PM motor series - Mitsubishi Electric
EM-A Series from Mitsubishi Electric include newly developed Permanent Magnet (PM) motors using the patented salient-pole core.
The rotor consists of the salient-pole core and surface-mounted permanent magnet, and therefore the motor inductance changes depending on the rotational position. This change in inductance is applied to the sensorless control.
The combination of the newly developed salient-pole magnetic motor and Mitsubishi’s unique high-performance sensorless control technique realizes high precision speed control and positioning control without a sensor (encoder).
The rotor consists of the salient-pole core and surface-mounted permanent magnet, and therefore the motor inductance changes depending on the rotational position. This change in inductance is applied to the sensorless control.
The combination of the newly developed salient-pole magnetic motor and Mitsubishi’s unique high-performance sensorless control technique realizes high precision speed control and positioning control without a sensor (encoder).
EMC Filters - Murrelektronik
EMC filters are essential components that prevent interferences in machines and systems. They reduce the interference emissions while improving immunity from internal and external interferences. Murrelektronik offers a comprehensive range of filters.
Murrelektronik offers a wide range of products that will help you build an electromagnetically compatible structure for machines and systems: EMC filters, suppressors for contactors, motors and valves together with ground straps (grounding and equipotential bounding) are the perfect tools to reach optimum results with little effort!
Murrelektronik solves your interference problems and is the right suppress ion for all standard inductive loads (contactors, motors and valves).
Murrelektronik offers a wide range of products that will help you build an electromagnetically compatible structure for machines and systems: EMC filters, suppressors for contactors, motors and valves together with ground straps (grounding and equipotential bounding) are the perfect tools to reach optimum results with little effort!
Murrelektronik solves your interference problems and is the right suppress ion for all standard inductive loads (contactors, motors and valves).
EMC Suppressors - Murrelektronik
When installing a machine or a system that has to meet the safety-related requirements of category 2 of ISO EN-13849, you have to respect CCF (chapter 6.2.5). CCF means "Common Cause Failure" and describes failures with a common cause.
Murrelektronik offers a wide range of products that will help you build an electromagnetically compatible structure for machines and systems: EMC filters, suppressors for contactors, motors and valves together with ground straps (grounding and equipotential bounding) are the perfect tools to reach optimum results with little effort!
Murrelektronik solves your interference problems and is the right suppress ion for all standard inductive loads (contactors, motors and valves).
Murrelektronik offers a wide range of products that will help you build an electromagnetically compatible structure for machines and systems: EMC filters, suppressors for contactors, motors and valves together with ground straps (grounding and equipotential bounding) are the perfect tools to reach optimum results with little effort!
Murrelektronik solves your interference problems and is the right suppress ion for all standard inductive loads (contactors, motors and valves).
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1