Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Compact turbine wheel flowmeter DRS - Kobold
Due to their compact design, the sturdy flow meters of the DRS type from Kobold, can be used even if little space is available.
The measurement method, which uses a sapphire-supported turbine wheel and is suitable for liquid media, is extremely low-wear, since the revolutions are sensed in a non-contact manner by magnets from outside. Based on the high repeatability of 0.1% of full-scale, this reliable measuring device with long term stability is highly qualified for batching tasks.
The measurement method, which uses a sapphire-supported turbine wheel and is suitable for liquid media, is extremely low-wear, since the revolutions are sensed in a non-contact manner by magnets from outside. Based on the high repeatability of 0.1% of full-scale, this reliable measuring device with long term stability is highly qualified for batching tasks.
Compressed air counter 645x - Testo
The testo 645X compressed air meter series enables you to carry out accurate compressed air consumption measurements, consumption and leak monitoring and flow measurements in your compressed air system.
In industrial companies, compressed air is an important source of energy which incurs high consumption costs. Testo compressed air meters allow a highly accurate measurement of compressed air consumption, enabling energy-saving potential to be identified and costs lowered.
In industrial companies, compressed air is an important source of energy which incurs high consumption costs. Testo compressed air meters allow a highly accurate measurement of compressed air consumption, enabling energy-saving potential to be identified and costs lowered.
Converter for electromagnetic flowmeter AMC3200 – ALIA
The ALIAMAG AMC3200 Series converter is a microprocessor based intelligent transmitter that can be paired with any of the Alia AMF series sensors. The unit features multiple display parameters including flow rate, flow total, diagnostics, programming and troubleshooting. It’s equiped with Bluetooth, HART and Modbus communication functions.
Converter for eletromagnetic flowmeter AMC 4000 – ALIA
The ALIAMThe ALIAMAG AMC4000 series converter is a microprocessor based inteligente transmitter that can be paired with any of the Alia AMF series converter. The unit features multiple display parameters including flow rate, flow total, diagnostics, programming and troubleshooting.
AG AMC4000 series converter is a microprocessor based inteligente transmitter that can be paired with any of the Alia AMF series converter. The unit features multiple display parameters including flow rate, flow total, diagnostics, programming and troubleshooting.
AG AMC4000 series converter is a microprocessor based inteligente transmitter that can be paired with any of the Alia AMF series converter. The unit features multiple display parameters including flow rate, flow total, diagnostics, programming and troubleshooting.
Coriolis mass flowmeter for hydrogen TMU-W - Kobold
For Hydrogen dispensing units up to 1000 bar.
The Mass Flow Meter model TMU utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric flow is additionally calculated with these parameters.
The Mass Flow Meter model TMU utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric flow is additionally calculated with these parameters.
Coriolis mass flowmeter for liquids and gases TMU - Kobold
The mass flow meter model TMU utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric flow is additionally calculated with these parameters.
The unit can be used to meter nearly all liquid or gaseous media and was especially designed to operate in many industrial applications. The TMU Series is also used for precise dosing as well as in loading and unloading applications. Approvals for service in custody transfer (fiscal metering) applications are also available.
The unit can be used to meter nearly all liquid or gaseous media and was especially designed to operate in many industrial applications. The TMU Series is also used for precise dosing as well as in loading and unloading applications. Approvals for service in custody transfer (fiscal metering) applications are also available.
Coriolis mass flowmeter TME/UMC4 - Kobold
High performance at an economical price.
The Kobold TME Series general purpose Coriolis mass flowmeter from KOBOLD Instruments is a very accurate, rugged design built for general purpose mass flow measurements of liquids and gases in most chemical, petrochemical, oil and gas applications.
Mass flow, density and temperature are simultaneously measured, and volumetric flow is computed from these parameters. The flowmeter’s wetted materials (flanges and measuring tubes) are available in 316L stainless steel. The measuring tubes and sensors are protected by a very rugged cast iron housing.
The Kobold TME Series general purpose Coriolis mass flowmeter from KOBOLD Instruments is a very accurate, rugged design built for general purpose mass flow measurements of liquids and gases in most chemical, petrochemical, oil and gas applications.
Mass flow, density and temperature are simultaneously measured, and volumetric flow is computed from these parameters. The flowmeter’s wetted materials (flanges and measuring tubes) are available in 316L stainless steel. The measuring tubes and sensors are protected by a very rugged cast iron housing.
Density meter DWF - Kobold
The displacer rod, which is attached to a measuring spring by a chain, immerses into the liquid and is subject to a buoyant force proportional to the mass of the displaced liquid.
Every change in the weight of the rod corresponds to a change in the length of the spring and is therefore a measure of the liquid level. The longitudinal expansion of the spring, i.e. the travel of the rod, will be transmitted from the measuring space to the indicator unit by means of a magnetic coupling. The basic version of the indicator consists of a scale with a pointer for displaying the liquid level. As an option, the indicator unit may be equipped with electrical transmitters for remote display or with limit switches.
Every change in the weight of the rod corresponds to a change in the length of the spring and is therefore a measure of the liquid level. The longitudinal expansion of the spring, i.e. the travel of the rod, will be transmitted from the measuring space to the indicator unit by means of a magnetic coupling. The basic version of the indicator consists of a scale with a pointer for displaying the liquid level. As an option, the indicator unit may be equipped with electrical transmitters for remote display or with limit switches.
Differential pressure flow meter/monitor – RCD - Kobold
The Kobold flow meter model RCD is used for measuring and monitoring liquid and gas flows. The device works on the well-known principle of the Venturi nozzle. A small pressure difference proportional to the flow is produced by the flowing medium at an orifice constriction (nozzle) in the device housing.
The shape of the nozzle is based on the flow, whereby the flow characteristic remains constant over the entire measuring range. Drill holes are located in the housing fitting to absorb the resulting differential pressure and transfer it to a differential-pressure measuring cell fitted in the housing.
The shape of the nozzle is based on the flow, whereby the flow characteristic remains constant over the entire measuring range. Drill holes are located in the housing fitting to absorb the resulting differential pressure and transfer it to a differential-pressure measuring cell fitted in the housing.
DVH – Vortex Flowmeter
Our fully welded "all in one design" DVH flowmeter measures volumetric flows of fluids. Integrated temperature and pressure sensors allow to measure temperature, density, pressure and mass flow. Furthermore, the evaluation of steam thermal energy, hot or chilled water application can be implemented.
Electromagnetic flow meters FLONET FH20XX - Elis Plzen
Induction flow meters/ electromagnetic flow meters are intended for industrial measurements of electrically conductive liquids in different fields of industry. Induction flow meters meet most demanding requirements on accuracy, reliability and long-term stability of measurements. Liquid flow rate measurements in both directions of flow are possible.
The liquid flow is measured in a contactless manner; the flow meter has no moving mechanical parts and the hydrodynamic conditions at the measurement location in the pipe are absolutely unaffected.
The liquid flow is measured in a contactless manner; the flow meter has no moving mechanical parts and the hydrodynamic conditions at the measurement location in the pipe are absolutely unaffected.
Electromagnetic flowmeter all metal stainless steel MIM – Kobold
The new flowmeter MIM was developed for measuring and monitoring smaller and medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow.
Electromagnetic flowmeter compact for conductivity liquids MIK - kobold
The new compact type MIK magnetic-inductive flowmeters of Kobold Messring GmbH from Hofheim have a variety of measuring ranges and are available in an incomparable range of designs.
Measuring ranges start at 0.01 l/min and currently end at 700 l/min. Six different measuring tube sizes from G ½ male to G 2 ¾ male are perfect for users with small to larged-sized measuring ranges. This device series combines the largest measuring range spectrum and the most design options with the lowest market price.
Measuring ranges start at 0.01 l/min and currently end at 700 l/min. Six different measuring tube sizes from G ½ male to G 2 ¾ male are perfect for users with small to larged-sized measuring ranges. This device series combines the largest measuring range spectrum and the most design options with the lowest market price.
Electromagnetic flowmeter MIS - Kobold
The new flowmeter MIS from Kobold was developed for measuring and monitoring medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes, which are in contact with the measuring agent.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes, which are in contact with the measuring agent.
Electromagnetic flowmeter – AMF500 | AMF601 | AMF900 - ALIA
ALIA electromagnetic flowmeter series are ideal for conductive liquids. They come in a wide range of sizes from 10mm to 2000 mm.
The electromagnetic flowmeters are widely used for sewage, industrial waste, chemical, solvent, food & beverage, drinking water, pulp & paper and many other industrial fluid.
These flowmeter series could be used in a compact or remote model with the AMC Series converter of electromagnetic flowmeters.
The electromagnetic flowmeters are widely used for sewage, industrial waste, chemical, solvent, food & beverage, drinking water, pulp & paper and many other industrial fluid.
These flowmeter series could be used in a compact or remote model with the AMC Series converter of electromagnetic flowmeters.
Flow indicators for liquids DAA – Kobold
To check the flow processes in pipeline systems and for insight into the interior of process pipes, many flow indicators are used in which the flowing medium sets a rotor turning and thus to a large extent visibly signals a flow. The particular thing with the special version Type DAA is that the rotor is housed in a glass cylinder.
This version ensures a functional flow check from two points of view. On the one hand its construction as a visible cylinder gives a relatively large and thus easily observed field of observation; in addition the rotary movement of the PTFE rotor permits reliable monitoring of cloudy or dark media due to its noticeably bright colouring. This type of device is already widely used and has proven itself in industrial use thanks to its functional reliability.
This version ensures a functional flow check from two points of view. On the one hand its construction as a visible cylinder gives a relatively large and thus easily observed field of observation; in addition the rotary movement of the PTFE rotor permits reliable monitoring of cloudy or dark media due to its noticeably bright colouring. This type of device is already widely used and has proven itself in industrial use thanks to its functional reliability.
Flow meter DTK for small quantities - Kobold
Inspired measurement technology for small volume flow.
With its new DTK impeller flow gauge for small quantities, Kobold-Messring GmbH offers a new versatile, efficient and very economic piece of equipment. This gauge was specially developed for use in low viscosity liquids. It’s very compact construction means it can be used in machines with restricted space as well as in industrial systems.
A special advantage of this gauge is its long term stability and robust construction.
In the DTK flow gauge the medium flows through a specially formed flow casing thus causing the impeller to rotate. Two magnets on the impeller generate electrical impulses in a Hall sensor. The frequency emitted by the electronics is then directly proportionate to the flow velocity.
Downline electronics can use these signals for measuring, monitoring and dosing.
With its new DTK impeller flow gauge for small quantities, Kobold-Messring GmbH offers a new versatile, efficient and very economic piece of equipment. This gauge was specially developed for use in low viscosity liquids. It’s very compact construction means it can be used in machines with restricted space as well as in industrial systems.
A special advantage of this gauge is its long term stability and robust construction.
In the DTK flow gauge the medium flows through a specially formed flow casing thus causing the impeller to rotate. Two magnets on the impeller generate electrical impulses in a Hall sensor. The frequency emitted by the electronics is then directly proportionate to the flow velocity.
Downline electronics can use these signals for measuring, monitoring and dosing.
Flow meter paddle torsional type DPT- kobold
The paddle torsional flow meter type DPT from kobold works with practically no wear and tear. A flat torsion spring fastening the paddle provides the elastic force, and forms the basis of the measuring principle. The deflection of the lever arm is transferred through a magnet to a Hall-effect sensor in a non-contacting fashion. This technology has important advantages: the devices operate independent of the operating pressure. Friction loss during paddle deflection causes no switching hysteresis.
Flow meter type DRH - kobold
The rotating vane flow meter type DRH from Kobold can measure flow rates of liquids of low viscosity – and even non-conducting liquids. Thanks to the extensive expertise and experience of Kobold in the field of industrial metrology and a comprehensive selection of specifications, excellent solutions can be provided for a whole range of tasks.
The ten measuring ranges extend from 0.2–0.8 l/min to 2.5–50 l/min. Seven different material combinations for case, cover and seal also provide suitable solutions for problematic media.
The brass and stainless steel models can operate at up to 100 bar service pressure and at a maximum temperature of 80°C.
The rotating vane flow meter DRH is ideally suited for service in refrigeration technology, in mechanical engineering and in printed-circuit board manufacturing.
The ten measuring ranges extend from 0.2–0.8 l/min to 2.5–50 l/min. Seven different material combinations for case, cover and seal also provide suitable solutions for problematic media.
The brass and stainless steel models can operate at up to 100 bar service pressure and at a maximum temperature of 80°C.
The rotating vane flow meter DRH is ideally suited for service in refrigeration technology, in mechanical engineering and in printed-circuit board manufacturing.
Flow restrictors REG - Kobold
Optimal regulation at low cost.
The flow limiter type REG works without auxiliary power. It keeps the required flow rates constant with great accuracy, independent of pressure fluctuations caused by switching consumers on and off. An impressively simple but unique principle is used, which is based on the use of spring plates.
Kobold model REG flow restrictors serve to keep constant quantities of liquids in pipework systems.
The flow limiter type REG works without auxiliary power. It keeps the required flow rates constant with great accuracy, independent of pressure fluctuations caused by switching consumers on and off. An impressively simple but unique principle is used, which is based on the use of spring plates.
Kobold model REG flow restrictors serve to keep constant quantities of liquids in pipework systems.
Flowmeter and counter for liquids and gases BGN - kobold
The Kobold BGN meter is suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit in time.
The Kobold BGN Series variable area flowmeter functions by the fluid flowing from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each position of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flowmeter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the position of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.
The Kobold BGN Series variable area flowmeter functions by the fluid flowing from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each position of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flowmeter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the position of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.
Flowmeter and counter for liquids and gases KDS – Kobold
Your process in your hand.
Whether for gaseous or liquid media, this robust device transmits a float position through a pointer or via an analog output. Through the use of a magnetic tracking system, it performs the monitoring and process control tasks reliably.
Whether for gaseous or liquid media, this robust device transmits a float position through a pointer or via an analog output. Through the use of a magnetic tracking system, it performs the monitoring and process control tasks reliably.
Flowmeter of liquids and gases, viscous and corrosive HPC – Kobold
The HPC flowmeter is unique in the world, as it has a Coriolis measuring tubes revolutionary and innovative design, providing a high dynamic performance, being able to work at higher frequencies without external vibrations interference.
The HPC is precise and resistant, ideal for applications with very low flow, it gives simultaneous measurement of mass flow, density and temperature, also calculating the volume flow.
The HPC is precise and resistant, ideal for applications with very low flow, it gives simultaneous measurement of mass flow, density and temperature, also calculating the volume flow.
Gas flow analyzer in atmospheric emissions Flowsic100 - Endress+Hauser
Volume flow measuring devices for continuous emission monitoring.
With diverse volume flow measuring devices Endress+Hauser provides solutions for a wide variety of measuring tasks - from calculating volume flows in processes, custody transfer applications in natural gas industry, environmental monitoring of plants, on test stands in automotive industry and many others.
The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
With diverse volume flow measuring devices Endress+Hauser provides solutions for a wide variety of measuring tasks - from calculating volume flows in processes, custody transfer applications in natural gas industry, environmental monitoring of plants, on test stands in automotive industry and many others.
The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
Inductive electromagnetic flowTRANS MAG H20 - JUMO
The flowTRANS MAG H20 from JUMO measures conductive media with high precision − even drop-by-drop.
The flowTRANS MAG H20 from JUMO is an electromagnetic flowmeter for industrial automation. Its compact design allows it to fit into the smallest plants (dosing systems, apparatus cooling) and to measure conductive media with a high degree of precision.
It can be used with flexibility in a wide range of processes. In addition to the flow measurement, the temperature is also measured.
The flowTRANS MAG H20 from JUMO is an electromagnetic flowmeter for industrial automation. Its compact design allows it to fit into the smallest plants (dosing systems, apparatus cooling) and to measure conductive media with a high degree of precision.
It can be used with flexibility in a wide range of processes. In addition to the flow measurement, the temperature is also measured.
Mass-thermal flowmeter for gases KET - Kobold
The newly developed KET combines modern digital interfaces to connect energy monitoring systems with a small, compact design. The KET is always used when many machines (compressed air consumers) are to be integrated into an energy monitoring network. Readout values in the display can be rotated by 180°, for example, for overhead installation. Display shows 2 values simultaneously: present flow in m³/h, l/min, etc.; total consumption (counter reading) in m³, l, kg; and temperature measurement.
Orifice plate and Orifice flange KPL - Kobold
If a pipeline (through which a medium flows) is reduced at a particular point by a cross-sectional constriction, the flow speed of the measured medium is increased at that point. According to Bernoulli’s energy equation and the law of continuity, the total flow head (dynamic velocity head and static pressure head) is constant. The increase in speed at the constriction causes a reduction in the static head.
The resulting pressure drop is called the differential pressure head; it is a measure of the flow (volume per unit of time or mass per unit of time). The flow rate q is given by: q = c√∆p The flow rate (q) is a function of the square root of the differential pressure head (∆p), where c is the coefficient of flow rate determined by the shape of the differential pressure transducer and the operating data. The pipeline may be constricted with orifice plates.
The resulting pressure drop is called the differential pressure head; it is a measure of the flow (volume per unit of time or mass per unit of time). The flow rate q is given by: q = c√∆p The flow rate (q) is a function of the square root of the differential pressure head (∆p), where c is the coefficient of flow rate determined by the shape of the differential pressure transducer and the operating data. The pipeline may be constricted with orifice plates.
Oval wheel flowmeter DOE - Kobold
Oval wheel flowmeter DOE – for low and high viscous liquids.
Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber.
With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be processed externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flowmeters.
Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber.
With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be processed externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flowmeters.
Oval wheel flowmeter for low and high viscous liquids DON - Kobold
Oval wheel flow meters for low and high viscous liquids
Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber. With each rotation, a constant volume of liquid is measured.
Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber. With each rotation, a constant volume of liquid is measured.
Paddle flow monitor for liquids PSE & PSR - Kobold
The Kobold flow monitor types PSE and PSR are simple, reasonably-priced and reliable monitors of fluid motions.
Depending on the flow velocity/flow throughput, the baffle plate is deflected and it moves, over the balance arm, the permanent magnet into the operating range of the reed contact, mounted outside the process fluid.
Depending on the flow velocity/flow throughput, the baffle plate is deflected and it moves, over the balance arm, the permanent magnet into the operating range of the reed contact, mounted outside the process fluid.
Portable ATEX multi-sensor area velocity flow meter MSFM S2.5T – Detectronic
Designed to monitor raw sewage, industrial effluent and storm waters, the MSFM S2.5T is a self-contained, battery-powered, insertion multi-sensor flow meter, suitable for applications in combined sewers, open channels and storm sewers. The MCERTS version is certified to deliver guaranteed flow measurement accuracy.
Portable ultrasonic flowmeter AUF610 - ALIA
The AUF610 series is a portable transit-time ultrasonic flowmeter with clamp-on transducers for non-invasive liquide measurement. Based on microprocessor and programmable flow measurement techniques, the process flow can be accurately measured without interrupting the flow and with low installation costs.
Sight glass flow indicator DAI - Kobold
Flow indicator for the observation of flowing media.
The new DAI flow indicator is suitable for horizontal and vertical installation. It is available in metal or plastic types matching process connections from DN 15 to DN 200. The plastic versions with sight glasses made of borosilicate glass withstand temperatures of up to +260 °C.
The new DAI flow indicator is suitable for horizontal and vertical installation. It is available in metal or plastic types matching process connections from DN 15 to DN 200. The plastic versions with sight glasses made of borosilicate glass withstand temperatures of up to +260 °C.
Thermal energy flowmeter for gas KEC - Kobold
The new flow sensors KEC work according to the calorimetric measuring principle. Therefore an additional temperature and pressure compensation is not necessary. Due to its robust design, the aluminium die cast housing, the robust sensor tip made from stainless steel 1.4571, new KEC are suitable for demanding industrial applications. Contrary to the previously used bridge circuit, the newly developed evaluation electronics records all measured values digitally. This allows very precise and fast measurements with a wide temperature range of up to 180 °C. The measuring span is 1... 1000 and enables therefore measurements in very low as well as very high flow speeds of up to 224 m/s.
Ultrasonic gas meter FLOWSIC500 - Endress+Hauser
The cutting-edge technology for ultimate measurement accuracy: The new FLOWSIC500 ultrasonic compact gas meter from Endress+Hauser enables highly accurate metering in natural gas distribution. In absence of mechanical moving parts, the FLOWSIC500 is a robust, fail-safe and low-maintenance device - allowing for a significant reduction in operating costs. It is overload-proof, accurate and is monitored by an intelligent diagnostics system.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Recalibration is simple and straightforward by replacing the cartridge. FLOWSIC500 can easily be integrated into existing measuring stations.
Ultrasonic gas meter FLOWSIC600 - Endress+Hauser
Every day natural gas flows in great quantities through pipelines or into storage facilities, thus changing owners. Precise gas quantity measurement is of the utmost importance, as even very small measurement errors could result in substantial economic loss. In addition, challenging ambient measurement conditions often play a decisive role. Moisture, ice, cold, heat and desert sand place great demands on the instruments in the field. This is why a gas flow meter is needed that is both accurate and reliable.
Ultrasonic gas meter FLOWSIC600-XT - Endress+Hauser
As the follow-up to the successful FLOWSIC600, the FLOWSIC600-XT ultrasonic gas flow measuring device is setting new standards in its market segment.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4 and 8 measurement paths to meet the requirements of every application, whether it’s being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600-XT meets the requirements of Class 0.5 and AGA9 in their entirety.
Ultrasonic portable and stationary flow meter for liquids DUC - Kobold
Clamp-On Ultrasonic Flow Measurement from DN 10 to DN 6000
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
The portable DUC-MP and the stationary DUC-MF (designed for continuous flow measurement), are very accurate and drift-free operating flowmeters for liquids in filled pipes. The devices operate absolutely hygienically and are leak proof. The monitoring of all aggressive and toxic liquids can be done without any problem.
Special advantage: The ultrasonic sensors are strapped from the outside on the pipe in the clamp-on method.
A cutting of the pipe is not required for installation. Similarly there is no requirement for process shutdown. In this way, the operating costs can be significantly reduced.
Ultrassonic flowmeter with IO-Link DUK - Kobold
Whether in the pharmaceutical industry, water treatment or food production: If non-conductive media flow in a chemical process, ultrasonic flow meters are usually installed for monitoring. For monitoring the measuring devices require short response times and a high degree of calibration freedom, otherwise incorrect metering or insufficient repeat accuracy will occur.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
The maintenance-free ultrasonic flowmeter type DUK with the newly developed C3T0 compact electronics from KOBOLD Messring GmbH provides a remedy here. Due to the extensive possibilities for on-site programming, the DUK is suitable for cross-industry use for diverse media.
Variable area flowmeter glass cone UVR/UTR - Kobold
The flow meters and switches model UVR and UTR for liquids and air operate on suspended float principle: that is, the installation position is vertical and the direction of flow is from bottom to top.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
The instruments have been designed as simple and thus economical measuring systems. The float for UVR and UTR is a bomb from float, whereby the indication point is the top of float. The appliance is available with or without needle valve as well.
Viscosity compensated flow meter VKM – KOBOLD
The KOBOLD flowmeters and switches model VKM have a spring-loaded float, which slides within a cylindrical measuring tube and has an integral orifice which is believed to be unique. This and other design features mean that it has for the first time become possible to create a flowmeter and switch which fully compensates for viscosity and to a large extent for density even with very low flows.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
The float of these patented devices contains a permanent magnet which actuates a potential free bistable reed contact mounted outside the flow thus ensuring hermetic separation between the medium and the electrical contact system. The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
VORTEX flow meter multivariable - Kobold
Flow with Integrated temperature and pressure measurement
With integrated temperature and pressure sensor, the DVH VORTEX flowmeter can measure mass, and can be used for energy consumption measurements.
With integrated temperature and pressure sensor, the DVH VORTEX flowmeter can measure mass, and can be used for energy consumption measurements.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1