Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Flow restrictors REG - Kobold
Optimal regulation at low cost.
The flow limiter type REG works without auxiliary power. It keeps the required flow rates constant with great accuracy, independent of pressure fluctuations caused by switching consumers on and off. An impressively simple but unique principle is used, which is based on the use of spring plates.
Kobold model REG flow restrictors serve to keep constant quantities of liquids in pipework systems.
The flow limiter type REG works without auxiliary power. It keeps the required flow rates constant with great accuracy, independent of pressure fluctuations caused by switching consumers on and off. An impressively simple but unique principle is used, which is based on the use of spring plates.
Kobold model REG flow restrictors serve to keep constant quantities of liquids in pipework systems.
Flowmeter and counter for liquids and gases BGN - kobold
The Kobold BGN meter is suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit in time.
The Kobold BGN Series variable area flowmeter functions by the fluid flowing from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each position of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flowmeter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the position of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.
The Kobold BGN Series variable area flowmeter functions by the fluid flowing from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each position of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flowmeter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the position of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.
Flowmeter and counter for liquids and gases KDS – Kobold
Your process in your hand.
Whether for gaseous or liquid media, this robust device transmits a float position through a pointer or via an analog output. Through the use of a magnetic tracking system, it performs the monitoring and process control tasks reliably.
Whether for gaseous or liquid media, this robust device transmits a float position through a pointer or via an analog output. Through the use of a magnetic tracking system, it performs the monitoring and process control tasks reliably.
Flowmeter of liquids and gases, viscous and corrosive HPC – Kobold
The HPC flowmeter is unique in the world, as it has a Coriolis measuring tubes revolutionary and innovative design, providing a high dynamic performance, being able to work at higher frequencies without external vibrations interference.
The HPC is precise and resistant, ideal for applications with very low flow, it gives simultaneous measurement of mass flow, density and temperature, also calculating the volume flow.
The HPC is precise and resistant, ideal for applications with very low flow, it gives simultaneous measurement of mass flow, density and temperature, also calculating the volume flow.
Flue gas analyzer portable - testo 340
Flue gas analyzer for use in industry.
Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
Precise technology: That’s what you want to be able to rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer ticks all these boxes.
The testo 340 combustion analyzer. For industrial emission measurements and more.
Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
Precise technology: That’s what you want to be able to rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer ticks all these boxes.
The testo 340 combustion analyzer. For industrial emission measurements and more.
Flue gas analyzer T300 Longlife - Testo
Truly smart flue gas measurement on heating systems with the testo 300 flue gas analyzer. High-quality sensors, intuitive operation with smart-touch technology and smart features, such as efficient documentation and e-mailing of reports, will make your day-to-day work easier.
Fork sensor UFW - SICK
The UFW fork sensor from SICK makes non-contact web edge guiding possible. Thanks to ultrasonic technology, the UFW detects various materials with great precision and is therefore ideally suited for applications with transparent films or light-sensitive materials. The compact housing designs (30 mm and 60 mm fork width) allow space-saving installation. Calibration is simple to perform using a teach-in button. Three LEDs indicate immediately the position of the web material within the fork. Furthermore, the IO-Link communication interface opens numerous possibilities for fine adjustment, analyses, and monitoring.
Fork sensors WF, UF, WFM e WFS - SICK
Simplicity, flexibility, and precision – combined in a single fork sensor.
SICK fork sensors combine senders and receivers in a single housing, meaning that they can be adjusted quickly.
Thanks to the precise, focused light beam and the high detection accuracy, the sensors from SICK also detect very minor light attenuation differences. Many different fork sizes, straightforward mounting, and exceptionally high ambient light immunity are just some of the advantages of these fork sensors.
SICK fork sensors combine senders and receivers in a single housing, meaning that they can be adjusted quickly.
Thanks to the precise, focused light beam and the high detection accuracy, the sensors from SICK also detect very minor light attenuation differences. Many different fork sizes, straightforward mounting, and exceptionally high ambient light immunity are just some of the advantages of these fork sensors.
Fotocélula de segurança quadrada L27 - SICK
Single-beam photoelectric safety switches from SICK offer maximum safety performance. They comprise self-testing senders and receivers or testable senders and receivers combined with na evaluation unit. They have long ranges and come in a variety of types and sizes. They comply with Type 2 and/or Type 4 in acc. with EN 61496, and PL c and/ or PL e in acc. with EN ISO 13849. Applications include robots, processing machinery, machining centers, palletizers.
FR-A800 speed variable drive – Mitsubishi Electric
Maximum performance in both machines and factories!
These ultramodern units were especially developed to be integrated in factories and machines, at maximum performance, where the increase of efficiency and productivity are guaranteed. The FR-A800 variable drives are easily programable and offer numerous communication networks.
These ultramodern units were especially developed to be integrated in factories and machines, at maximum performance, where the increase of efficiency and productivity are guaranteed. The FR-A800 variable drives are easily programable and offer numerous communication networks.
Free chlorine sensor tecLine CL2 - JUMO
The tecLine CL2 from JUMO is a membrane-covered, amperometric sensor designed to precisely measure free chlorine concentrations in various water types, including drinking water, swimming pool water, industrial water, process water, and cooling water. This sensor can be directly interfaced with compatible display and control units.
Utilizing an amperometric measurement principle with a protective membrane, the sensor effectively detects free chlorine originating from inorganic disinfectants such as chlorine gas (Cl₂), electrolytically generated chlorine, sodium hypochlorite (NaOCl), calcium hypochlorite (Ca(OCl)₂), and chlorinated lime (Ca(OCl)Cl). It is not suitable for confirming the absence of free chlorine.
Utilizing an amperometric measurement principle with a protective membrane, the sensor effectively detects free chlorine originating from inorganic disinfectants such as chlorine gas (Cl₂), electrolytically generated chlorine, sodium hypochlorite (NaOCl), calcium hypochlorite (Ca(OCl)₂), and chlorinated lime (Ca(OCl)Cl). It is not suitable for confirming the absence of free chlorine.
Frequency inverter FR-F800 - Mitsubishi Electric
The FR-F800 inverter from Mitsubishi Electric brings even more reliability, intelligence and cost savings to pumps, fans and compressors.
False alarms and trips to unnecessary maintenance work due to disconnected pumps and fans are increasingly unacceptable as the industry drives for greater efficiency and operational readiness. The new FR-F800 drive provides a smart solution to this emerging need and represents the next generation of speed drives for pumps, fans and compressors.
The intrinsically intelligent FR-F800 inverter, from Mitsubishi Electric, virtually eliminates unnecessary maintenance travel, makes commissioning easier and can achieve 98% energy efficiency. It includes advanced features for specific applications such as waste water processing, compressors and HVAC (hot air ventilation and air conditioning).
False alarms and trips to unnecessary maintenance work due to disconnected pumps and fans are increasingly unacceptable as the industry drives for greater efficiency and operational readiness. The new FR-F800 drive provides a smart solution to this emerging need and represents the next generation of speed drives for pumps, fans and compressors.
The intrinsically intelligent FR-F800 inverter, from Mitsubishi Electric, virtually eliminates unnecessary maintenance travel, makes commissioning easier and can achieve 98% energy efficiency. It includes advanced features for specific applications such as waste water processing, compressors and HVAC (hot air ventilation and air conditioning).
Frequency inverters FR-CS80 - Mitsubishi Electric
FR-CS80 the most compact inverter from Mitsubihsi Electric!
Mitsubishi Electric presents the new ultra-compact FR-CS80 series, which is very easy to install, with high performance, ultra-compact design and extremely competitive.
Mitsubishi's new FR-CS80 drive has now emerged to complement the existing range of inverters. This inverter comes to compete in a more competitive way in the range of compact inverters, offering an excellent performance in a very compact body.
Mitsubishi Electric presents the new ultra-compact FR-CS80 series, which is very easy to install, with high performance, ultra-compact design and extremely competitive.
Mitsubishi's new FR-CS80 drive has now emerged to complement the existing range of inverters. This inverter comes to compete in a more competitive way in the range of compact inverters, offering an excellent performance in a very compact body.
Frequency inverters FR-D700 - Mitsubishi Electric
The micro-drive solution!
Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new Mitsubishi FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives.
Failure safety with self-diagnostics
This inverter actively monitors its own functional safety. If, for example, the fan rpm decreases to 50 %, a pre-alarm is triggered. An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation.
Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new Mitsubishi FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives.
Failure safety with self-diagnostics
This inverter actively monitors its own functional safety. If, for example, the fan rpm decreases to 50 %, a pre-alarm is triggered. An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation.
FTMg flow sensors with energy measurement - SICK
The FTMg energy consumption flow meter measures gas flow and temperature, as well as process pressure and energy consumption, with only one sensor – making it a cost-saving multi-talent.
With high measurement dynamics and reduced pressure loss, it measures non-corrosive gases – such as argon, helium, carbon dioxide and nitrogen – and compressed air with extreme efficiency.
With high measurement dynamics and reduced pressure loss, it measures non-corrosive gases – such as argon, helium, carbon dioxide and nitrogen – and compressed air with extreme efficiency.
Gas analyser PowerCEMS100 - Endress+Hauser
PowerCEMS100 - High-performance, future-proof CEMS for emission measurement.
The PowerCEMS100 continuous emission monitoring system (CEMS) is an economically and technically perfect solution for extractive measurement tasks. This all-in-one system comprises high-quality standard assemblies and components and can be adapted to the application-specific requirements thanks to its modular system design. Retrofitting analyzer modules or gas conditioners is easy and inexpensive. The innovative PowerCEMS100 system is certified according to European standards EN 15267-1/-3 and EN 14181, and offers future-proof solutions for emission measurement and process applications.
The PowerCEMS100 continuous emission monitoring system (CEMS) is an economically and technically perfect solution for extractive measurement tasks. This all-in-one system comprises high-quality standard assemblies and components and can be adapted to the application-specific requirements thanks to its modular system design. Retrofitting analyzer modules or gas conditioners is easy and inexpensive. The innovative PowerCEMS100 system is certified according to European standards EN 15267-1/-3 and EN 14181, and offers future-proof solutions for emission measurement and process applications.
Gas detection - SePem 100_150 – Sewerin
Noise logger for monitoring water pipe networks: sturdy – convenient – reliable.
Detect water losses early
Leaks in water pipe networks can result in significant water losses. Thanks to systematic monitoring of the network with SePem® data loggers, you can reliably identify existing leaks and catch new ones early on – much faster than with conventional methods.
Detect water losses early
Leaks in water pipe networks can result in significant water losses. Thanks to systematic monitoring of the network with SePem® data loggers, you can reliably identify existing leaks and catch new ones early on – much faster than with conventional methods.
Gas detection service with iNet® Exchange – Industrial Scientific – Industrial Scientific
It can be difficult to know when there is an issue with your monitors and what the issue is. iNet® Exchange is a gas detection service keeps track and replaces your monitor whenever issues arise.
Simplify all aspects of your gas detection program with iNet® Exchange—a subscription service that automatically notifies users that gas monitors need to be evaluated for replacement, before the user even knows there's a problem.
And now you can access service iNet Exchange from within your iNet Control software.
Simplify all aspects of your gas detection program with iNet® Exchange—a subscription service that automatically notifies users that gas monitors need to be evaluated for replacement, before the user even knows there's a problem.
And now you can access service iNet Exchange from within your iNet Control software.
Gas flow analyzer in atmospheric emissions Flowsic100 - Endress+Hauser
Volume flow measuring devices for continuous emission monitoring.
With diverse volume flow measuring devices Endress+Hauser provides solutions for a wide variety of measuring tasks - from calculating volume flows in processes, custody transfer applications in natural gas industry, environmental monitoring of plants, on test stands in automotive industry and many others.
The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
With diverse volume flow measuring devices Endress+Hauser provides solutions for a wide variety of measuring tasks - from calculating volume flows in processes, custody transfer applications in natural gas industry, environmental monitoring of plants, on test stands in automotive industry and many others.
The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
Gas flow analyzer in Flowsic 200 tunnels - Endress+Hauser
The FLOWSIC200 from Endress+Hauser is used for the contact-free and accurate measurement of flow velocity and flow direction inside tunnels or exhaust ventilation ducts.
Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
Gas leak detector for indoor installations EX-TEC SNOOPER 4 - Sewerin
Explosion-proof gas leak detector with integrated gas database.
The EX-TEC SNOOPER 4 is a gas leak detector for detecting the smallest leaks in installation lines and at connection points.
The modular device concept allows users to choose either a basic device without a pump (diffusion device) or a device with integrated pump.
The EX-TEC SNOOPER 4 is a gas leak detector for detecting the smallest leaks in installation lines and at connection points.
The modular device concept allows users to choose either a basic device without a pump (diffusion device) or a device with integrated pump.
Gas leak detector – Snooper mini - Sewerin
The SNOOPER mini is a robust gas leak detector and is suitable for checking accessible gas lines for external leak tightness. Leaks are determined based on detection at connection points, e.g. fittings, flanges, threaded connections and gas regulator fittings. The gas concentration is displayed in the ppm range. House lead-ins and concealed gas lines in enclosed spaces at air outlets can also be checked.
SEWERIN's SNOOPER mini is a sturdy gas leak detector for inspecting accessible gas lines. Overall, gas leak detectors have a decisive advantage over the leak detection sprays that are still commonly used, in that they not only indicate the presence of a leak, but also the concentration at the leak site.
SEWERIN's SNOOPER mini is a sturdy gas leak detector for inspecting accessible gas lines. Overall, gas leak detectors have a decisive advantage over the leak detection sprays that are still commonly used, in that they not only indicate the presence of a leak, but also the concentration at the leak site.
Gateway Access Point Anybus® - HMS
Anybus® Access Point expand your Wi-Fi network indoors or outdoors (IP67) connectivity.
Anybus® Access Point from HMS enables you to connect industrial machines and devices to a wireless connectivity at high data rates. Developed for indoor and outdoor industrial settings and with wireless mesh, the Anybus Wireless LAN access points ensure a highly reliable network setup.
With really simple and intuitive configuration tool on na webrowser with your laptop, tablet or smartphone.
The Anybus get all kind of acessories for mouting installation in pole or wall mouning.
Anybus® Access Point from HMS enables you to connect industrial machines and devices to a wireless connectivity at high data rates. Developed for indoor and outdoor industrial settings and with wireless mesh, the Anybus Wireless LAN access points ensure a highly reliable network setup.
With really simple and intuitive configuration tool on na webrowser with your laptop, tablet or smartphone.
The Anybus get all kind of acessories for mouting installation in pole or wall mouning.
Gateway de diagnóstico Cube 67 - Murrelektronik
Gateway for IO-Link SIG200 device integration – SICK
The SIG200 Sensor Integration Gateway is an IO-Link master for integrating IO-Link devices into common PLC environments and enterprise level systems. With the SIG200, digital inputs, digital outputs or IO-Link signals of several devices can be detected, combined, evaluated and transmitted via various fieldbus protocols.
Gateway industrial PC UNO-2271G - Advantech
The World’s Smallest Fanless industrial PC!
Advantech's new generation UNO-2000 series of Embedded Automation Computers are fanless and have a highly ruggedized and embedded operation system. New UNO-2000 series implement Universal, Customized and Domain idea into a modular design concept, which provides flexible and time-to-market support in a variety of applications.
It also includes iDoor technology which supports automation feature-extensions such as Multiple I/O Peripheral, Industrial Fieldbus, Smart I/O Communication and Signal Communication. New UNO-2000 series includes Pocket, Small, and Regular-size Form-Factors, with indicated market segments in terms of different kinds of smart factory application categories, such as Equipment Connectivity (EC), Process Visualization (PV), Environment Management (EM) and Dispatch Management (DM) solution. New compact industrial PC UNO-2271G enables smart factory and fulfils all applications.
Advantech's new generation UNO-2000 series of Embedded Automation Computers are fanless and have a highly ruggedized and embedded operation system. New UNO-2000 series implement Universal, Customized and Domain idea into a modular design concept, which provides flexible and time-to-market support in a variety of applications.
It also includes iDoor technology which supports automation feature-extensions such as Multiple I/O Peripheral, Industrial Fieldbus, Smart I/O Communication and Signal Communication. New UNO-2000 series includes Pocket, Small, and Regular-size Form-Factors, with indicated market segments in terms of different kinds of smart factory application categories, such as Equipment Connectivity (EC), Process Visualization (PV), Environment Management (EM) and Dispatch Management (DM) solution. New compact industrial PC UNO-2271G enables smart factory and fulfils all applications.
Gateway industrial PC UNO-2271G V2 - Advantech
Advantech’s UNO-2000 series of embedded automation computers are highly rugged, fanless systems. The modular design offers strong computing performance and flexible scalability
with various I/O ports for IoT Connectivity.
The UNO-2271G V2 are designed as IoT edge gateways. Their pocket size design features versatile I/O ports and expansion options to support wire/wireless communication, and AI accelerators for IoT edge data analysis and processing. UNO-2271G V2 IoT edge gateways enable various industrial applications across multiple industries.
with various I/O ports for IoT Connectivity.
The UNO-2271G V2 are designed as IoT edge gateways. Their pocket size design features versatile I/O ports and expansion options to support wire/wireless communication, and AI accelerators for IoT edge data analysis and processing. UNO-2271G V2 IoT edge gateways enable various industrial applications across multiple industries.
Gateway RGX® - Industrial Scientific
Gateways and gas-detection instruments from Industrial Scientific can communicate with one another using the company’s LENS™ Wireless (Linked Equipment Network for Safety) feature.
LENS communications can be transmitted by RGX to iNet® Now—the Industrial Scientific live-monitoring application for cloud connected safety. The customer sets the RGX to communicate with iNet using the desired transmission options: cellular (if supported), wi-fi, or Ethernet.
The Gateway RGX can also be used in “repeater mode”, to simply repeat communications it receives without transmitting them to iNet Now. When strategically placed, repeaters fill a distance gap or can bridge would-be obstructed connections among LENS peers.
LENS communications can be transmitted by RGX to iNet® Now—the Industrial Scientific live-monitoring application for cloud connected safety. The customer sets the RGX to communicate with iNet using the desired transmission options: cellular (if supported), wi-fi, or Ethernet.
The Gateway RGX can also be used in “repeater mode”, to simply repeat communications it receives without transmitting them to iNet Now. When strategically placed, repeaters fill a distance gap or can bridge would-be obstructed connections among LENS peers.
Gateway wireless AirGate Modbus - Novus
AirGate Modbus is a gateway specially designed to build a wireless sensor network.
The AirGate Modbus can be used as a Modbus RS485 network extender, offering flexibility and scalability for various networks.
The AirGate Modbus can be used as a Modbus RS485 network extender, offering flexibility and scalability for various networks.
Gateway Wireless Bolt - Anybus® - HMS
Wireless connector giving a machine or cabinet wireless access via Bluetooth® or Wireless LAN (WLAN).
Gateway wireless bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).
On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as TCP/IP and UDP.
Gateway wireless bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).
On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as TCP/IP and UDP.
Gateway Wireless Bolt IoT- Anybus® - HMS
Anybus Wireless Bolt IoT allows industrial machines, electrical panels and even vehicles to connect to a wireless network.
Anybus Wireless Bolt IoT from Anybus® - HMS is an access point, to be mounted on machines, vehicles or electrical panels, designed to allow access to wireless networks using mobile data. This access makes it possible to configure the system were the Bolt is connected through a laptop, tablet, smartphone or any service in the cloud.
Anybus Wireless Bolt IoT from Anybus® - HMS is an access point, to be mounted on machines, vehicles or electrical panels, designed to allow access to wireless networks using mobile data. This access makes it possible to configure the system were the Bolt is connected through a laptop, tablet, smartphone or any service in the cloud.
Gateway Wireless Bridge II Anybus® - HMS
New possibilities for industrial wireless solutions.
HMS features a new and updated version of the popular Anybus Wireless Bridge. The Anybus Wireless Bridge II supports reliable wireless communications, up to 400 meters and can communicate via Bluetooth or WLAN. It is ideal for replacing Ethernet cabling in locations that are difficult to access, dangerous or where it is impossible to install.
HMS features a new and updated version of the popular Anybus Wireless Bridge. The Anybus Wireless Bridge II supports reliable wireless communications, up to 400 meters and can communicate via Bluetooth or WLAN. It is ideal for replacing Ethernet cabling in locations that are difficult to access, dangerous or where it is impossible to install.
Gateways for HVAC interface Intesis® 700 AIR series – HMS
The 700 Series Air is our common platform for HVAC integration.
This concept enables multiple connectivity options that are available from the same gateway platform.
700 Series Air gateway solutions.
Having different HVAC brands and protocols available on the same hardware enables multiple possibilities for integration. Each combination is defined as an application.
With the configuration tool MAPS, users can define the AC brand and protocol integration according to the project's needs.
This concept enables multiple connectivity options that are available from the same gateway platform.
700 Series Air gateway solutions.
Having different HVAC brands and protocols available on the same hardware enables multiple possibilities for integration. Each combination is defined as an application.
With the configuration tool MAPS, users can define the AC brand and protocol integration according to the project's needs.
Gateways for Intesis Cloud solutions - HMS
Intesis ST Cloud Solution.
Cloud-based control of building installations which enables easy monitoring and control of any BACnet or Modbus device from mobile phone apps and computer web interfaces.
Cloud-based control of building installations which enables easy monitoring and control of any BACnet or Modbus device from mobile phone apps and computer web interfaces.
Gateways for remote access Ewon Cosy+ 4G EU - HMS
Efective and sustainable support of machines.
Capitalizing on the success of the Cosy 131, the Ewon Cosy+ is the new generation of industrial gateway for remote access, resulting from the implementation of the most advanced security technologies in hardware devices.
Capitalizing on the success of the Cosy 131, the Ewon Cosy+ is the new generation of industrial gateway for remote access, resulting from the implementation of the most advanced security technologies in hardware devices.
Gateways for remote access Ewon Cosy+ ETH - HMS
Efective and sustainable support of machines.
Capitalizing on the success of the Cosy 131, the Cosy+ is the new generation of industrial gateway for remote access, resulting from the implementation of the most advanced security technologies in hardware devices.
Capitalizing on the success of the Cosy 131, the Cosy+ is the new generation of industrial gateway for remote access, resulting from the implementation of the most advanced security technologies in hardware devices.
Gateways for remote access Ewon Cosy+ Wi-Fi - HMS
Capitalizing on the success of the Cosy 131, the Cosy+ is the new generation of industrial gateway for remote access, resulting from the implementation of the most advanced security technologies in hardware devices.
Gateways for remote access Ewon Flexy 205 - HMS
The Ewon Flexy family, from HMS, is a range of industrial modular gateways that allows universal communication with varied field equipment regardless of the protocol used.
It is possible to configure data acquisition & data logging, routing and more, all requirements for digitalization in one unit.
It is possible to configure data acquisition & data logging, routing and more, all requirements for digitalization in one unit.
Gateways protocol translators Intesis - HMS
The protocol translator gateways has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of your building automation projects.
Gateways protocol translators Intesis® 700 series – HMS
HMS Networks present Intesis® 700 series for protocol translation, a new concept that breaks the old reliance between hardware and software.
This concept enables interfaces for multiple Building Automation protocols in the same hardware so, the user can pair the combination using Intesis MAPS. The process is called late configuration.
This concept enables interfaces for multiple Building Automation protocols in the same hardware so, the user can pair the combination using Intesis MAPS. The process is called late configuration.
GD10 gas detector – TELEDYNE Oldham
CO2 and explosive gases detection
These infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and construction is so stable that an ultra fast speed of response can be achieved while providing unparalleled service life.
The GD10 series optical block is so robust, reliable and stable that it comes with a 15 year warranty, saving on maintenance costs and calibration services.
These infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and construction is so stable that an ultra fast speed of response can be achieved while providing unparalleled service life.
The GD10 series optical block is so robust, reliable and stable that it comes with a 15 year warranty, saving on maintenance costs and calibration services.
gesis® indoor flat cable system NRG – Wieland Electric
The flexible busbar gesis® NRG functions as central supply line for efficient installations. The contact is through an insulation-penetrating connection technology. Five systems with different cross sections are available – regardless of whether you want to distribute power or signals.
The gesis® NRG flat cable system offers all the advantages of a modern electrical installation system. Once the cable is outspread, we can connect the distribution modules without having to sectioning the cable. Expansions or modification of the electrical installations can be done in a very little time with a great money saving. The connection to the conductor is done by specific screws that drill the cable.
The gesis® NRG flat cable system offers all the advantages of a modern electrical installation system. Once the cable is outspread, we can connect the distribution modules without having to sectioning the cable. Expansions or modification of the electrical installations can be done in a very little time with a great money saving. The connection to the conductor is done by specific screws that drill the cable.
gesis® Indoor – GST08 MICRO series – Wieland Electric
gesis® MICRO makes the electrical installation invisible.
Because is so small, all you need is a drilled hole to run the lines through.
The gesis® MICRO connector system connects your light showcases and on shelves in places where no one else can reach. And it does so in the simplest way imaginable.
Because gesis® MICRO comes as a pre-assembled cable, you do not have to connect the plugs manually, it is all Plug&Play.
This makes the electrical installation inside your furniture invisible from the outside, so that nothing distracts the eye from the things that matter.
Because is so small, all you need is a drilled hole to run the lines through.
The gesis® MICRO connector system connects your light showcases and on shelves in places where no one else can reach. And it does so in the simplest way imaginable.
Because gesis® MICRO comes as a pre-assembled cable, you do not have to connect the plugs manually, it is all Plug&Play.
This makes the electrical installation inside your furniture invisible from the outside, so that nothing distracts the eye from the things that matter.
gesis® Indoor – GST15 MINI series – Wieland Electric
The MINI version of gesis® system is nearly the same has the GST18 series but with a compact design: pluggable electrical installation specially developed for confined spaces.
gesis® MINI meets both demands and combines minimum size with maximum flexibility.Thereby, this is the preferred system for stores, event tents and exhibitions, where a fast and flexible electrical installation is mandatory.
gesis® MINI also has on its strengths the interface for pre-assembling devices, as lighting equipment, office and laboratory furniture, among others …
gesis® MINI meets both demands and combines minimum size with maximum flexibility.Thereby, this is the preferred system for stores, event tents and exhibitions, where a fast and flexible electrical installation is mandatory.
gesis® MINI also has on its strengths the interface for pre-assembling devices, as lighting equipment, office and laboratory furniture, among others …
gesis® Indoor – GST18® series – Wieland Electric
Plug and play – everything can be connected!
A breakthrough idea has emerged at Wieland which revolutionizes electrical installation: the gesis® installation system. Highest-grade quality and long-lasting components along with a convincing 70% time and 30% cost savings!
The individual gesis® product groups complement each other perfectly and facilitate a simple and economical electrical installation, from distribution panels up to the load.
A breakthrough idea has emerged at Wieland which revolutionizes electrical installation: the gesis® installation system. Highest-grade quality and long-lasting components along with a convincing 70% time and 30% cost savings!
The individual gesis® product groups complement each other perfectly and facilitate a simple and economical electrical installation, from distribution panels up to the load.
gesis® outdoor RST® series – Wieland Electric
Requiring increased protection of electrical installations from environmental conditions are found everywhere. Experience and competence in designing and installing the electrical system always plays a decisive role, but especially in this area. Difficult installation conditions and increased time pressure often lead to mistakes, loss of the environmental protection, and ultimately to failure of the system.
With just a few basic components, including connectors, panel-mount connectors, distribution units and cable assemblies, complex installations from the distribution panel up to each point of demand can be accomplished. This saves time and costs.
With just a few basic components, including connectors, panel-mount connectors, distribution units and cable assemblies, complex installations from the distribution panel up to each point of demand can be accomplished. This saves time and costs.
gesis® Outdoor RST® SOLAR – Wieland Electric
With the round connector system gesis® IP+, Wieland Electric offers the perfect solution for your photovoltaic system. Whether on the AC side with the product line RST®, or the DC side with the product line PST®, solar systems are installed quickly and without error. The result is clear savings in time and costs.
Pre-assembled components with an increased degree of protection ensure a quick and safe installation even under the most adverse conditions. The system includes distribution panels which are delivered in a pre-assembled design, and cable assemblies for the connection between the inverters and the distribution panels. The system is supplemented by connectors for assembly on site. Leading inverter manufacturers already preassemble their devices in the factory, with the relevant RST® connectors to interface the system.
Pre-assembled components with an increased degree of protection ensure a quick and safe installation even under the most adverse conditions. The system includes distribution panels which are delivered in a pre-assembled design, and cable assemblies for the connection between the inverters and the distribution panels. The system is supplemented by connectors for assembly on site. Leading inverter manufacturers already preassemble their devices in the factory, with the relevant RST® connectors to interface the system.
gesis® Outdoor – RST® MINI series – Wieland Electric
Smallest pluggable installation connector with highest IP rating, optimized for installation in confined spaces.
The new RST® MINI series marks a continuation of the story of the RST® installation system’s success and logically follows the trend towards compact designs. The 2 to 5 pole plug connectors and device connectors have been designed for 250/400V and 16A and are all available in the screw connection technology that electricians trust.
Customized distributors as well as pre-assembled cables round the system off perfectly and offer a huge range of different possible uses, not just in building automation or industry.
The new RST® MINI series marks a continuation of the story of the RST® installation system’s success and logically follows the trend towards compact designs. The 2 to 5 pole plug connectors and device connectors have been designed for 250/400V and 16A and are all available in the screw connection technology that electricians trust.
Customized distributors as well as pre-assembled cables round the system off perfectly and offer a huge range of different possible uses, not just in building automation or industry.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1