Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Login
MyFFonseca
If you do not have an account MyFFonseca, please register and get access to exclusive content to registered users!
Create registry
Power Supply Unit – Emparro - Murrelektronik
Emparro – Simply the Best!
The Power Supply Unit with Maximum Efficiency.
Murrelektronik presents Emparro, a highly innovative power supply unit with maximum efficiency and minimum power loss. The combination of the Power Boost function with a power limiter output allows large loads to be started easily. The wide input voltage range makes Emparro a global player.
Modern machine builders and users are paying attention to power consumption. Our new power supply units put the focus on efficiency because energy is a precious commodity and unused machine energy increases costs.
The Power Supply Unit with Maximum Efficiency.
Murrelektronik presents Emparro, a highly innovative power supply unit with maximum efficiency and minimum power loss. The combination of the Power Boost function with a power limiter output allows large loads to be started easily. The wide input voltage range makes Emparro a global player.
Modern machine builders and users are paying attention to power consumption. Our new power supply units put the focus on efficiency because energy is a precious commodity and unused machine energy increases costs.
Power Supply – Emparro® 3~ – Murrelektronik
Murrelektronik’s Emparro family has a new member. The newly developed Emparro 3-phase power supplies for 24V applications are important components in quality power management systems. They are extremely reliable, extraordinarily efficient and they don’t require much space in the cabinet.
Reliable power supplies are an essential component to ensure maximum availability of machines and systems. Therefore, reliability was a high priority during development of these new 3-phase units.
Achieving this MTBF is possible because of our high-quality components, the modern and slim circuit board design and the processor-controlled electronics.
An integrated gas discharge valve protects the power supply from interfering pulses up to 6kV. Therefore, overvoltage coming from the mains, EMC interference (as caused by frequency converters) or contact bounces cannot cause any damage.
Reliable power supplies are an essential component to ensure maximum availability of machines and systems. Therefore, reliability was a high priority during development of these new 3-phase units.
Achieving this MTBF is possible because of our high-quality components, the modern and slim circuit board design and the processor-controlled electronics.
An integrated gas discharge valve protects the power supply from interfering pulses up to 6kV. Therefore, overvoltage coming from the mains, EMC interference (as caused by frequency converters) or contact bounces cannot cause any damage.
Power Systems Smart Current Distribuition - Murrelektronik
MICO Electronic auxiliary circuit, 4 channels IN: 24VDC OUT: 24V/1-2-3-4ADC.
The power supply is the heart of every control cabinet. In past years, many advances have been made in this field. Rectified power supply units are more frequently replaced by primary switched power supply units. This provides many advantages, however, it also requires consistent and targeted protection of the systems.
MICO is the right solution for this problem. MICO, from Murrelektronik, is an intelligent power distribution system: It monitors currents, indicates when approaching the maximum load, and detects over-stress. This facilitates troubleshooting and secures machine availability. MICO is available in a 2-channel and 4-channel version – enabling an economic system structure.
The power supply is the heart of every control cabinet. In past years, many advances have been made in this field. Rectified power supply units are more frequently replaced by primary switched power supply units. This provides many advantages, however, it also requires consistent and targeted protection of the systems.
MICO is the right solution for this problem. MICO, from Murrelektronik, is an intelligent power distribution system: It monitors currents, indicates when approaching the maximum load, and detects over-stress. This facilitates troubleshooting and secures machine availability. MICO is available in a 2-channel and 4-channel version – enabling an economic system structure.
Power Systems Smart Current Distribution - MICO Fuse- Murrelektronik
Solutions for inteligente power distribution.
Complex power supply systems with many components require reliable load protection. Switch mode power supplies are the heart of these systems since they electronically monitor output voltage and output current. If there is a short circuit or an overload, protective devices downstream (for example circuit breakers) react slower than the power supply and do not ensure selectivity. This can cause critical situations like voltage drops or even cable fires.
Our compact MICO modules help to eliminate these effects: They are an essential component for protecting power supply systems!
Complex power supply systems with many components require reliable load protection. Switch mode power supplies are the heart of these systems since they electronically monitor output voltage and output current. If there is a short circuit or an overload, protective devices downstream (for example circuit breakers) react slower than the power supply and do not ensure selectivity. This can cause critical situations like voltage drops or even cable fires.
Our compact MICO modules help to eliminate these effects: They are an essential component for protecting power supply systems!
PowerProx MultiTask photoelectric sensors - Sick
The powerful PowerProx MultiTask photoelectric sensors offer all of the advantages of time-of-flight technology in the world's smallest sensor housing to date, giving maximum flexibility when designing machines.
Objects being conveyed at high speed, small and flat objects, and jet-black or shiny objects can now be reliably detected at sensing ranges between 5 cm and 4 m. PowerProx also provides stable detection results over a large detection angle. The “Distance”, “Speed”, “Precision”, “Small”, “Micro”, and “WTT280L” versions are designed to be used in different applications. This means that PowerProx always offers perfect solution – for empty bay detection via rapid counting right through to use in handling and assembly.
Objects being conveyed at high speed, small and flat objects, and jet-black or shiny objects can now be reliably detected at sensing ranges between 5 cm and 4 m. PowerProx also provides stable detection results over a large detection angle. The “Distance”, “Speed”, “Precision”, “Small”, “Micro”, and “WTT280L” versions are designed to be used in different applications. This means that PowerProx always offers perfect solution – for empty bay detection via rapid counting right through to use in handling and assembly.
Precision luminance meter MAVO-SPOT 2 USB - Gossen Metrawatt
The MAVO-SPOT 2 USB from Gossen Metrawatt is a high-precision luminance meter for spot measurements with a 1° measuring angle, Class B in accordance with: DIN 5032-7, DIN EN 13032-1 (Annex B) and ISO/CIE 19476 (CIE S 023).
The instrument measures the brightness effect of illuminated or luminous surfaces in cd/m² (candela per square metre) or foot-lambert (fL) with spectral sensitivity adapted to the photopic V(λ) response of the human eye.
Its precision optical system with SLR targeting enables accurate alignment of the defined 1° measuring field, ensuring reproducible results in laboratory and field environments.
The MAVO-SPOT 2 USB from Gossen Metrawatt is suitable for professional photometric applications including contrast analysis, luminance uniformity testing and compliance verification in regulated environments.
The instrument measures the brightness effect of illuminated or luminous surfaces in cd/m² (candela per square metre) or foot-lambert (fL) with spectral sensitivity adapted to the photopic V(λ) response of the human eye.
Its precision optical system with SLR targeting enables accurate alignment of the defined 1° measuring field, ensuring reproducible results in laboratory and field environments.
The MAVO-SPOT 2 USB from Gossen Metrawatt is suitable for professional photometric applications including contrast analysis, luminance uniformity testing and compliance verification in regulated environments.
Precision pressure indicator ADT715 - Additel
The ADT715 from Additel is a high-precision, multichannel benchtop pressure indicator engineered for calibration laboratories, production environments, and demanding process applications. It integrates internal precision pressure modules with optional external digital modules, enabling simultaneous measurement on up to five channels. The built-in barometric sensor supports switching between absolute and gauge reference modes.
The device combines high stability, wide range flexibility, and an intuitive touchscreen interface for efficient operation and integration.
The device combines high stability, wide range flexibility, and an intuitive touchscreen interface for efficient operation and integration.
Presence detector Dual HF – STEINEL
A corridor sensor that points the way. Both in technology and design.
Twice as vigilant! High-frequency corridor sensor Presence Control PRO Dual HF COM1 for indoors, ideal for passageways and long corridors, installation height up to 3.5 m, for switching light 'ON' and 'OFF', DUAL-HF technology for detecting radial movement over up to 20 m in two directions, detection regardless of temperature, HF-sensor technology detects movement through glass, wood and stud walls, switches light 'ON' almost instantly.
Twice as vigilant! High-frequency corridor sensor Presence Control PRO Dual HF COM1 for indoors, ideal for passageways and long corridors, installation height up to 3.5 m, for switching light 'ON' and 'OFF', DUAL-HF technology for detecting radial movement over up to 20 m in two directions, detection regardless of temperature, HF-sensor technology detects movement through glass, wood and stud walls, switches light 'ON' almost instantly.
Presence detector Dual US – STEINEL
Watches over the entire corridor. And can see around corners. DUAL US ultrasonic motion detector, ideal for corridors and passageways. Reliable detection within 20 m, envelops objects as opposed to penetrating them, detection regardless of temperature, electronically adjustable reach, COM1 for switching light ON and OFF.
Presence detector DualTech – STEINEL
The best of both worlds. Combined in one detector.
The best of both worlds. Combined in one detector. Ultrasonic presence detector DualTech, ideal for offices, conference rooms and class rooms. 36 sq.m. presence zone, ultrasonic technology provides reliable detection behind objects regardless of temperature, additional detection capability with PIR technology, electronic adjustment for ultrasonic reach, COM1 for switching light ON and OFF.
The best of both worlds. Combined in one detector. Ultrasonic presence detector DualTech, ideal for offices, conference rooms and class rooms. 36 sq.m. presence zone, ultrasonic technology provides reliable detection behind objects regardless of temperature, additional detection capability with PIR technology, electronic adjustment for ultrasonic reach, COM1 for switching light ON and OFF.
Presence detector HF 360 - STEINEL
You can hardly see it. But it sees everything.
Doesn't miss a thing. HF-presence detector Presence Control PRO HF 360 COM1 for indoors, ideal for WCs with toilet cubicles, changing rooms, stairwells, multi-storey car parks, kitchens, installation height up to 3.5 m, for switching light 'ON' and 'OFF', 1 – 12 m reach, reach is electronically adjustable and can be limited in two directions, detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls.
Doesn't miss a thing. HF-presence detector Presence Control PRO HF 360 COM1 for indoors, ideal for WCs with toilet cubicles, changing rooms, stairwells, multi-storey car parks, kitchens, installation height up to 3.5 m, for switching light 'ON' and 'OFF', 1 – 12 m reach, reach is electronically adjustable and can be limited in two directions, detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls.
Presence detector IR Quattro - STEINEL
More than a presence detector. Squaring the circle.
Infrared presence detector Presence Control PRO IR Quattro COM1 for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, installation height up to 8 m, for switching light 'ON' and 'OFF', 1760 switching zones for excellent detection quality, square presence detection zone covering 16 m2, mechanically scalable.
Infrared presence detector Presence Control PRO IR Quattro COM1 for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, installation height up to 8 m, for switching light 'ON' and 'OFF', 1760 switching zones for excellent detection quality, square presence detection zone covering 16 m2, mechanically scalable.
Presence detector IR Quattro HD DALI plus – STEINEL
The gateway to intelligent lighting control. Intelligent infrared presence detector IR Quattro HD DALI plus with a wide range of additional functions, ideal for classrooms, open-plan offices and multi-storey car parks, mounting height up to 10 m, with three lighting channels (DALI addressable) for up to 64 luminaires, easily set up via app. Additional floating relay, constant-lighting control and variable light-level functions, button interface for all 3 lighting channels for controlling and dimming the floating relay (lighting mode), remotely controllable via Smart Remote.
Presence detector IR Quattro HD – STEINEL
Fits on the ceiling. And sees what others dream of.
Detection no finer! Infrared presence detector Presence Control PRO IR Quattro HD COM1 for indoors, ideal for medium to large-size offices, conference and meeting rooms, classrooms and lecture theatres, sports halls and warehouses, installation height up to 10 m, for switching light 'ON' and 'OFF', 4800 switching zones for the ultimate in detection quality, presence detection over a true 64 m2, square detection zone, mechanically scalable.
Now also available in black.
Detection no finer! Infrared presence detector Presence Control PRO IR Quattro HD COM1 for indoors, ideal for medium to large-size offices, conference and meeting rooms, classrooms and lecture theatres, sports halls and warehouses, installation height up to 10 m, for switching light 'ON' and 'OFF', 4800 switching zones for the ultimate in detection quality, presence detection over a true 64 m2, square detection zone, mechanically scalable.
Now also available in black.
Presence detector IR Quattro MICRO - STEINEL
Small sensor. Great performance.
The IR Quattro MICRO meets the wish of many architects and planners for a sensor that's as inconspicuous as possible. It impresses with its compact size after installation, low overall height and a micro precision lens (15 x 15 mm). At the same time, the small 360° infrared presence puts on a great performance, covering 36 m². IP65 certification also makes it suitable for rooms exposed to moisture.
Now also available in black.
The IR Quattro MICRO meets the wish of many architects and planners for a sensor that's as inconspicuous as possible. It impresses with its compact size after installation, low overall height and a micro precision lens (15 x 15 mm). At the same time, the small 360° infrared presence puts on a great performance, covering 36 m². IP65 certification also makes it suitable for rooms exposed to moisture.
Now also available in black.
Presence detector IR Quattro SLIM - STEINEL
Genuine 16 m2 of presence detection concentrated on 4 mm. Control PRO IR Quattro SLIM COM1 presence detector for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, for mounting at a height of up to 4 m, for switching light ON and OFF, square presence detection zone covering 16m², high-quality retina lens.
Presence detector IR Quattro SLIM XS COM1 – STEINEL
Our slimmest presence detector. Now even smaller in concealed box format.
Noticeably Inconspicuous. IR Quattro SLIM XS, the extra-slim presence detector in concealed-box format. Fits into any standard concealed box. Overall height of just 6 mm. High-precision 360° infrared senor with globally unique retina lens and 16 sq.m square presence detection zone (4 x 4 m). Adjustment via remote control or Smart Remote.
Noticeably Inconspicuous. IR Quattro SLIM XS, the extra-slim presence detector in concealed-box format. Fits into any standard concealed box. Overall height of just 6 mm. High-precision 360° infrared senor with globally unique retina lens and 16 sq.m square presence detection zone (4 x 4 m). Adjustment via remote control or Smart Remote.
Presence detector PD-24 ECO - STEINEL
With the new motion and presence detectors of the Eco Plus series from, STEINEL, the most common sensor-based standard requirements and everyday scenarios in the contract sector can be successfully and easily implemented. The pragmatic entry-level models form a sound basis for intelligent, energy-saving and environmentally friendly light management, taking into account the prevailing daylight. The high-performance infrared sensors convince with reliable 360° detection that can be adapted as required by means of plug-in cover caps in matching colors.
Presence detector Single US - STEINEL
The ideal sensor for small corridors.
Single US ultrasonic motion detector, ideal for corridors, thoroughfares and stairwells as well as WC facilities, washrooms and store rooms. Detection within 10 m, both radially and tangentially, envelops objects as opposed to penetrating them, detection regardless of temperature, electronically adjustable reach, COM1 for switching light ON and OFF.
Single US ultrasonic motion detector, ideal for corridors, thoroughfares and stairwells as well as WC facilities, washrooms and store rooms. Detection within 10 m, both radially and tangentially, envelops objects as opposed to penetrating them, detection regardless of temperature, electronically adjustable reach, COM1 for switching light ON and OFF.
Presence detector True Presence® - STEINEL
The world's first true presence detector! No unnecessary stay-On times any more – no unnecessary electricity costs. Precision high-frequency measurement of the surrounding area provides 100% reliable detection. The True Presence® detector reliably identifies whether persons are present or absent over an area of 64 m² – on the basis of the body's micro movements as well as human vital functions, such as breathing in and out, or shoulder movement. The new standard in building automation.
The first true presence detector.
The first true presence detector.
Presence detector True Presence® multisensor - STEINEL
7 senses for intelligent buildings.
Besides human presence, True Presence® Multisensor KNX also makes it possible to measure brightness, room temperature, humidity, air quality, volatile organic compounds (VOC) and CO₂. Nothing remains hidden from the True Presence® Multisensor KNX. Result: better efficiency, better health, better safety and better comfort.
Besides human presence, True Presence® Multisensor KNX also makes it possible to measure brightness, room temperature, humidity, air quality, volatile organic compounds (VOC) and CO₂. Nothing remains hidden from the True Presence® Multisensor KNX. Result: better efficiency, better health, better safety and better comfort.
Presence detector US 360 COM1– STEINEL
Detects without obstructions. 360° ultrasonic presence detector US 360, ideal for offices, conference rooms, store rooms and class rooms. 36 sq.m. presence detection zone, immune to obstacles, envelops objects as opposed to penetrating them, detection regardless of temperature, electronically adjustable reach, COM1 for switching light ON and OFF.
Presence switch HF 180 - STEINEL
Reliably detects through partition walls. HF 180 presence switch. The high-frequency sensor system quickly detects any movement regardless of temperature – even through partition walls, e.g. offices, entrance rooms or toilet facilities. 180° angle of coverage, up to 8 m reach. Intelligent technology, high-calibre design, easy 3-wire installation.
Presence switch IR 180 - STEINEL
The new standard for infrared sensor switches.
The new benchmark. High-precision IR 180 infrared presence sensor with a reach of 20 m. Ideal for new builds. 180° angle of coverage. Fast and easy 3-wire installation. Attractive design. Integrated button for manual override. The KNX version also provides temperature and air humidity readings. Available in white or silver finish colours.
The new benchmark. High-precision IR 180 infrared presence sensor with a reach of 20 m. Ideal for new builds. 180° angle of coverage. Fast and easy 3-wire installation. Attractive design. Integrated button for manual override. The KNX version also provides temperature and air humidity readings. Available in white or silver finish colours.
Presence switch IR 180 UNIVERSAL - STEINEL
World first for modernisation and refurbishment. IR 180 UNIVERSAL 180° infrared presence switch in patented 2-wire design – perfect for LED lamps. Integrated SuperCap energy storage system for flawless functionality even in the event of a power cut. Zero-watt stand-by output. Absolutely flicker-free light from any lamp. Integrated switch for manual override. 20 m reach. In white or silver.
Pressure calibrator ADT760 - Additel
A portable automated pressure calibrator in the palm of your hand ADT760 from vacuum up to 20 bar.
The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display.
To generate pressure, simply key in the desired pressure and the Additel 760 will do the rest. Each unit has four channels: one internal pressure channel for source and measure pressures, two external pressure measurement channels, and one electronic measure and source channel. This series of calibrator has three standard models with the option of adding HART communications, documentation and data logging.
The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display.
To generate pressure, simply key in the desired pressure and the Additel 760 will do the rest. Each unit has four channels: one internal pressure channel for source and measure pressures, two external pressure measurement channels, and one electronic measure and source channel. This series of calibrator has three standard models with the option of adding HART communications, documentation and data logging.
Pressure calibrator ADT761A-1K - Additel
The new ADT761A series of pressure calibrators adds value and improvements to the Additel automatic pressure calibrator family. New calibration ranges up to 70bar (without external pressure), removable internal pressure modules, models with 0.01% FS accuracy range, faster readability of 2 external pressure modules, new display touch screen, WiFi, Bluetooth, Ethernet, double battery life, and more.
Pressure sensor PBT – SICK
A genuinely talented all-rounder!
The PBT is a universal electronic pressure transmitter used in general industrial applications for pressure measurement of liquid and gaseous fluids.
Suitable for standard measuring applications in machine and plant engineering, pressure control systems, hydraulics, pneumatics, etc., it supports a wide variety of configurations, and can thus provide the perfect match for individual customer requirements. Its precise and rugged measurement technology, compact dimensions, and quick and simple installation set the pressure sensor PBT, from SICK, apart as a genuinely talented all-rounder.
The PBT is a universal electronic pressure transmitter used in general industrial applications for pressure measurement of liquid and gaseous fluids.
Suitable for standard measuring applications in machine and plant engineering, pressure control systems, hydraulics, pneumatics, etc., it supports a wide variety of configurations, and can thus provide the perfect match for individual customer requirements. Its precise and rugged measurement technology, compact dimensions, and quick and simple installation set the pressure sensor PBT, from SICK, apart as a genuinely talented all-rounder.
Pressure sensor PFT – SICK
The flexible solution.
The PFT electronic pressure transmitter is used for the precision measurement of pressures in liquids and gases. Distinguished by its high-quality measurement technology, the device is well suited to solve demanding measurement tasks in industrial applications.
Designs with extended temperature range, enhanced measurement accuracy, or flush-mounted membrane open up a wide range of applications. Its vast configurability ensures the pressure sensor PFT from SICK can perfectly suit the most diverse customer requirements.
The PFT electronic pressure transmitter is used for the precision measurement of pressures in liquids and gases. Distinguished by its high-quality measurement technology, the device is well suited to solve demanding measurement tasks in industrial applications.
Designs with extended temperature range, enhanced measurement accuracy, or flush-mounted membrane open up a wide range of applications. Its vast configurability ensures the pressure sensor PFT from SICK can perfectly suit the most diverse customer requirements.
Pressure sensor with IO-Link dTRANS p35 - Jumo
dTRANS p35 is a pressure sensor that measures relative and absolute pressure, for monitoring liquids and gases, with IO-Link interface.
The dTRANS p35 is a sensor for Industry 4.0, as it benefits from the bi-directional IO-link 1.1 communication, which allows the exchange of process information, parameters, diagnostic information and status messages, optimizing processes down to the lowest field level. It allows the reduction of assembly and start-up times, as well as maintenance and service costs.
The dTRANS p35 is a sensor for Industry 4.0, as it benefits from the bi-directional IO-link 1.1 communication, which allows the exchange of process information, parameters, diagnostic information and status messages, optimizing processes down to the lowest field level. It allows the reduction of assembly and start-up times, as well as maintenance and service costs.
Pressure switch PBS Hygienic – SICK
The electronic pressure switch PBS Hygienic has been designed for use in the food and beverage industry.
The wetted parts are gap-free and have no dead spaces. Their high-quality stainless steel surfaces are smooth and easy to clean. The highly resistant stainless steel membrane is welded to the hygienic process connection without gaps or edges. The device is designed for CIP and SIP processes. This enables safe hygienic operation in conjunction with optimized system availability.
The wetted parts are gap-free and have no dead spaces. Their high-quality stainless steel surfaces are smooth and easy to clean. The highly resistant stainless steel membrane is welded to the hygienic process connection without gaps or edges. The device is designed for CIP and SIP processes. This enables safe hygienic operation in conjunction with optimized system availability.
Pressure transmitter DELOS HP - Jumo
The DELOS HP is Jumo’s precision pressure transmitter with switching contacts and display.
The DELOS HP high-precision electronic pressure switch with analogue output is predestined for use on test benches, with laboratory equipment, and for construction of special machines. These areas frequently demand precise measurement and a configuration adapted to the measurement task.
The stainless steel sensor welded to the process connection features a high burst safety, which is in part as much as 5x the measuring range. Consequently, the plant is reliably protected against medium leaks in the event of a malfunction.
The DELOS HP high-precision electronic pressure switch with analogue output is predestined for use on test benches, with laboratory equipment, and for construction of special machines. These areas frequently demand precise measurement and a configuration adapted to the measurement task.
The stainless steel sensor welded to the process connection features a high burst safety, which is in part as much as 5x the measuring range. Consequently, the plant is reliably protected against medium leaks in the event of a malfunction.
Pressure transmitter DELOS S02 - JUMO
The DELOS S02 from JUMO is a compact, reliable "powerhouse" − it is easy to configure and offers high process reliability as well as accuracy. In addition, the pressure transmitter is also available as an Ethernet-capable version and can be used in many industries.
The pressure transmitter is used to measure relative and absolute pressures in liquid and gaseous media. It offers a high degree of process reliability through maximum accuracy and long-term stability. Measuring ranges are from 0.1 to 60 bar relative or 0.4 to 60 bar absolute pressure.
The pressure transmitter is used to measure relative and absolute pressures in liquid and gaseous media. It offers a high degree of process reliability through maximum accuracy and long-term stability. Measuring ranges are from 0.1 to 60 bar relative or 0.4 to 60 bar absolute pressure.
Pressure transmitter MIDAS C08 - Jumo
Basic OEM pressure transmitter.
The pressure transmitter MIDAS C08, is the standard sensor, designed to correspond almost all industrial aplications, like machines, compressors, pneumatics and industrial system applications.
The main requirement of OEM pressure measuring instruments like this is unlimited functionality and availability over many years and decades, without the need for maintenance. Outstanding long-term stability is a highly significant factor in justifying this claim. Thanks to its new, patented sensor technology, JUMO has been able to improve by 100 % the customary long-term stability of comparable market products.
The exceptional vibration performance – 2.5 times as high as the industry standard – also makes sure that the product will be ready to use for many years to come. The temperature compensation range is a remarkable –20 to +100 °C, thus ensuring outstanding measuring accuracy in the operative temperature range of –30 to +125 °C.
The diagnostic functions integrated in the circuit provide safe error detection within the system.
The pressure transmitter MIDAS C08, is the standard sensor, designed to correspond almost all industrial aplications, like machines, compressors, pneumatics and industrial system applications.
The main requirement of OEM pressure measuring instruments like this is unlimited functionality and availability over many years and decades, without the need for maintenance. Outstanding long-term stability is a highly significant factor in justifying this claim. Thanks to its new, patented sensor technology, JUMO has been able to improve by 100 % the customary long-term stability of comparable market products.
The exceptional vibration performance – 2.5 times as high as the industry standard – also makes sure that the product will be ready to use for many years to come. The temperature compensation range is a remarkable –20 to +100 °C, thus ensuring outstanding measuring accuracy in the operative temperature range of –30 to +125 °C.
The diagnostic functions integrated in the circuit provide safe error detection within the system.
Pressure transmitter MIDAS S05 - Jumo
The MIDAS S05 is Jumo's small but versatile pressure sensor whose build quality allows it to be installed in most processes.
The high-quality stainless-steel construction and completely welded measuring system without seals allows the MIDAS S05 to be installed in virtually any environment, including the most aggressive.
The high-quality stainless-steel construction and completely welded measuring system without seals allows the MIDAS S05 to be installed in virtually any environment, including the most aggressive.
Pressure transmitter TAROS S47 P - Jumo
Jumo’s TAROS S47 P is the pressure transmitter for applications that require a high level of accuracy.
With analogue output, the TAROS S47 P has a pressure measuring cell with a silicon piezoresistive sensor. The transmitter for relative or absolute pressure can be used in liquid or gaseous media.
Pressure is converted into electrical current or voltage and different types of electrical connections can be chosen.
With analogue output, the TAROS S47 P has a pressure measuring cell with a silicon piezoresistive sensor. The transmitter for relative or absolute pressure can be used in liquid or gaseous media.
Pressure is converted into electrical current or voltage and different types of electrical connections can be chosen.
Pressure transmitter with ceramic element SEN-96 - kobold
The Kobold SEN-96 standard model is an electronic transmitter with ceramic sensor for air, industrial, technical gases, water and oil, designed to be installed in gas distribution plants, on bottles, on refrigerators, on compressors, on vacuum pumps and hydraulics and water high pressure plants.
The Kobold SEN-96 Series pressure transmitters combine the reliability of a solid-state ceramic sensor with a very economical price. These pressure transmitters are available in an accuracy class of ≤ ±1.0% of range with a standard 4-20 mA, 2-wire analog output, allowing the SEN-96 pressure transmitter to interface with most modern control systems. Optional voltage outputs are available. The heart of the SEN-96 pressure transmitter is a ceramic piezoresistive pressure-sensing element.
The Kobold SEN-96 Series pressure transmitters combine the reliability of a solid-state ceramic sensor with a very economical price. These pressure transmitters are available in an accuracy class of ≤ ±1.0% of range with a standard 4-20 mA, 2-wire analog output, allowing the SEN-96 pressure transmitter to interface with most modern control systems. Optional voltage outputs are available. The heart of the SEN-96 pressure transmitter is a ceramic piezoresistive pressure-sensing element.
Process Controler / Programer DICON touch - Jumo
Jumo's DICON touch is a two-channel universal processor and program controller that displays information on a vibrant screen. The device is easy to operate thanks to the touch screen display.
Both DICON touch control channels use the Jumo control algorithm with two possible optimization options. These allow simple and highly accurate initialization. Allows multiple zone control, cascade control or other complex control tasks.
Four analog universal inputs and up to eight external inputs can record a variety of measured physical values with high accuracy. Actuators can be controlled directly on the device with an analog or digital configuration. These can be expanded through external digital outputs. Interfaces such as Modbus (master/ slave), PROFIBUS, PROFINET-RT or Ethernet with web server can be used for communication with higher order systems.
Both DICON touch control channels use the Jumo control algorithm with two possible optimization options. These allow simple and highly accurate initialization. Allows multiple zone control, cascade control or other complex control tasks.
Four analog universal inputs and up to eight external inputs can record a variety of measured physical values with high accuracy. Actuators can be controlled directly on the device with an analog or digital configuration. These can be expanded through external digital outputs. Interfaces such as Modbus (master/ slave), PROFIBUS, PROFINET-RT or Ethernet with web server can be used for communication with higher order systems.
Professional PC correlation – Perfect results with completely digital technology - SeCorr 300 – Sewerin
With the SeCorr® 300, completely digital signal processing and transmission by and large eliminates the interference which so often causes problems in conventional correlators.
The digital radio eradicates the notorious hissing in transmission paths. Even the narrow bandwidth of analogue modules no longer poses a restriction. The noises recorded from the leak are already digitised in the microphone thus eliminating feedback via the cables. This produces significant advantages, particularly in plastic piping, where the noise emitted from the leak is, as a rule, very poorly transmitted and thus very quiet. The result is improved leak coverage in non-metallic piping, which is increasingly used nowadays in water pipe networks.
The digital radio eradicates the notorious hissing in transmission paths. Even the narrow bandwidth of analogue modules no longer poses a restriction. The noises recorded from the leak are already digitised in the microphone thus eliminating feedback via the cables. This produces significant advantages, particularly in plastic piping, where the noise emitted from the leak is, as a rule, very poorly transmitted and thus very quiet. The result is improved leak coverage in non-metallic piping, which is increasingly used nowadays in water pipe networks.
Profibus DP Master Card - L Series - Mitsubishi Electric
The new PROFIBUS DP master card creates a world of possibilities for Mitsubishi Electric L-Series PLCs.
It is still one of the most popular field networks in Europe, used in many industries, being the most successful fieldbus in the world with 43.8 million devices installed.
The Profibus network is one of the most used automation networks in Europe.
With a wide range of equipment compatible with this network and available in the market and already installed in the industry, the L series PLCs from Mitsubishi Electric are able to integrate any new or already installed automation system, when connecting in a communication network Fast and robust.
It is still one of the most popular field networks in Europe, used in many industries, being the most successful fieldbus in the world with 43.8 million devices installed.
The Profibus network is one of the most used automation networks in Europe.
With a wide range of equipment compatible with this network and available in the market and already installed in the industry, the L series PLCs from Mitsubishi Electric are able to integrate any new or already installed automation system, when connecting in a communication network Fast and robust.
PROFINET/PROFIsafe Fieldbus module MVK Fusion - Murrelektronik
What makes the MVK Fusion fieldbus module unique is its variety. It combines three basic functions: standard digital sensors and actuators, safety digital sensors and actuators and IO-Link. This combination is new and innovative. It enables unique and groundbreaking automation concepts to be realized. Installation becomes simpler and faster.
Programmable 3D camera TriSpectorP1000 - SICK
Tailor-made 3D solutions for flexible automation.
The TriSpectorP1000, from SICK, is a programmable 3D camera ready for Industry 4.0. Part of the SICK AppSpace eco-system, the 3D camera and the software tools that are included open up possibilities for tailor-made solutions – with easy commissioning and operation in areas such as quality control, robot handling, and profile verification. The TriSpectorP1000 operates stand-alone and contains imaging, lighting, and analysis in a single rugged housing. Laser triangulation technology provides color-independent, contrast-independent, and true object shape data in millimeters. The TriSpectorP1000 is the perfect choice for fully flexible, cost-efficient, in-line industry automation solutions.
The TriSpectorP1000, from SICK, is a programmable 3D camera ready for Industry 4.0. Part of the SICK AppSpace eco-system, the 3D camera and the software tools that are included open up possibilities for tailor-made solutions – with easy commissioning and operation in areas such as quality control, robot handling, and profile verification. The TriSpectorP1000 operates stand-alone and contains imaging, lighting, and analysis in a single rugged housing. Laser triangulation technology provides color-independent, contrast-independent, and true object shape data in millimeters. The TriSpectorP1000 is the perfect choice for fully flexible, cost-efficient, in-line industry automation solutions.
Programmable controllers MELSEC iQ-F Series FX5S – Mitsubishi Electric
All-in-one programmable controllers from stand-alone use to networked system applications.
Small IoT can be realized even with a simple model!
This series will bring your business to the next level of industry, designed based on the concepts of outstanding performance, superior drive control, compatibility with IoT, and user centric programming.
The FX5S is standard equipped with a built-in USB (Mini-B) connector and built-in Ethernet port.
This module is compact and condenses the high basic performance, such as the positioning and IoT functions, and ease of use.
Small IoT can be realized even with a simple model!
This series will bring your business to the next level of industry, designed based on the concepts of outstanding performance, superior drive control, compatibility with IoT, and user centric programming.
The FX5S is standard equipped with a built-in USB (Mini-B) connector and built-in Ethernet port.
This module is compact and condenses the high basic performance, such as the positioning and IoT functions, and ease of use.
Programmable controllers MELSEC iQ-R Series – Mitsubishi Electric
The core for next-generation automation environment.
To succeed in highly competitive markets, it's important to build automation systems that ensure high productivity and consistent product quality.
The MELSEC iQ-R Series, from Mitsubishi Electric, has been developed from the ground up based on common problems faced by customers and rationalizing them into seven key areas: Productivity, Engineering, Maintenance, Quality, Connectivity, Security and Compatibility.
MELSEC iQ-R, from Mitsubishi Electric, is taking a three-point approach to solving these problems: Reducing TCO (Total Cost of Ownership), increasing Reliability and Reuse of existing assets.
To succeed in highly competitive markets, it's important to build automation systems that ensure high productivity and consistent product quality.
The MELSEC iQ-R Series, from Mitsubishi Electric, has been developed from the ground up based on common problems faced by customers and rationalizing them into seven key areas: Productivity, Engineering, Maintenance, Quality, Connectivity, Security and Compatibility.
MELSEC iQ-R, from Mitsubishi Electric, is taking a three-point approach to solving these problems: Reducing TCO (Total Cost of Ownership), increasing Reliability and Reuse of existing assets.
Programmable incremental encoder DFS60 - SICK
The DFS60 is a high-resolution incremental encoder with a diameter of 60mm. It offers a wide variety of mechanical and electric interfaces and can also be programmed by the customer if required.
Programming of the output signal and zero pulse is a unique feature for the market. The high enclosure rating, wide temperature range and large ball bearing distance ensure extreme robustness, making the DFS60 the ideal encoder for industrial applications in harsh environments.
Programming of the output signal and zero pulse is a unique feature for the market. The high enclosure rating, wide temperature range and large ball bearing distance ensure extreme robustness, making the DFS60 the ideal encoder for industrial applications in harsh environments.
Programmable safety controller Flexi Soft – SICK
SICK's safety controllers provide a simple, flexible, and scalable solution to realize an intelligent machine design. Flexi safety controllers feature a modular hardware platform without the use of complex software. They are simple to operate and can be easily integrated with all safety control components. Their compact design makes these safety controllers ideal for a variety of applications.
The Flexi Soft is a software programmable, expandable, easy-to-commission safety controller that can be efficiently adapted to the requirements of a variety of safety applications.
The Flexi Soft is a software programmable, expandable, easy-to-commission safety controller that can be efficiently adapted to the requirements of a variety of safety applications.
Programming tool for PC PGT-8-S - SICK
The PGT-08-S is an intuitive programming tool that allows the configuration of the programmable encoders from SICK.
This tool has a low weight and compact dimensions, can be used to configure all the encoders from the F family, incremental and absolute.
This tool has a low weight and compact dimensions, can be used to configure all the encoders from the F family, incremental and absolute.
Programming tool with display for Incremental encoders PGT-10-Pro - SICK
The PGT-10-Pro is an intuitive programming tool that allows the configuration of the SICK programmable encoders.
This tool has a very low weight and compact dimensions, it’s easily movable and can be used anywhere, not needing a PC or any additional software.
This tool has a very low weight and compact dimensions, it’s easily movable and can be used anywhere, not needing a PC or any additional software.
Protocol converter gateways Intesis® 700 series – HMS
HMS Networks presents the Intesis® Series 700 protocol converter gateways, a new generation of protocol converters designed to simplify integration between automation systems.
By interconnecting devices, networks, and systems, communication can be established, and data can flow between different platforms. However, for this communication to be effective, all involved elements must speak the same language. This is precisely where Intesis® protocol converters come into play, ensuring translation and interoperability between different systems.
The Intesis® Series 700 gateways introduce a new architectural concept that removes the traditional dependency between hardware and software, allowing the same hardware to support multiple protocol combinations. Configuration is performed through the Intesis MAPS software, where users can easily select the protocols required for each application.
By interconnecting devices, networks, and systems, communication can be established, and data can flow between different platforms. However, for this communication to be effective, all involved elements must speak the same language. This is precisely where Intesis® protocol converters come into play, ensuring translation and interoperability between different systems.
The Intesis® Series 700 gateways introduce a new architectural concept that removes the traditional dependency between hardware and software, allowing the same hardware to support multiple protocol combinations. Configuration is performed through the Intesis MAPS software, where users can easily select the protocols required for each application.
Proximity inductive sensor IDF - SICK
Detecting double layers in film stack processes, e.g. in battery production, is a huge challenge. The new IDF double film sensors reliably detect whether a suction gripper has picked up one or several films and ensure that the unwanted double film is immediately sorted out.
Due to its small size, the sensor can be integrated directly into the gripper. In addition, in contrast to other solutions, the IDF does not need a receiver unit. It thus detects the films as soon as they are picked by the gripper, so only from one film side. This speeds up the process times.
Teaching-in different films is done in mere seconds, and can be performed either by teach-in via a cable or via IO-Link.
Due to its small size, the sensor can be integrated directly into the gripper. In addition, in contrast to other solutions, the IDF does not need a receiver unit. It thus detects the films as soon as they are picked by the gripper, so only from one film side. This speeds up the process times.
Teaching-in different films is done in mere seconds, and can be performed either by teach-in via a cable or via IO-Link.
Proximity inductive sensor IMA - SICK
Analog sensors with triple sensing range for use in industrial environments
The IMA inductive analog sensors give out a current or voltage signal which is in proportional relation to the distance from the sensor to the metal target.
They are therefore optimally suited for monitoring travel paths, positions or even differentiating between spaces and material variants. The proximity inductive sensors IMA, from SICK, are characterized by extremely large detection ranges up to 40 mm, high accuracy, precision and no blind areas.
The IMA inductive analog sensors give out a current or voltage signal which is in proportional relation to the distance from the sensor to the metal target.
They are therefore optimally suited for monitoring travel paths, positions or even differentiating between spaces and material variants. The proximity inductive sensors IMA, from SICK, are characterized by extremely large detection ranges up to 40 mm, high accuracy, precision and no blind areas.
Proximity inductive sensor IMC - SICK
The inductive, intelligent, and, thanks to IO-Link 1.1, communication-enabled IMC proximity sensors offer a whole host of new options to make handling applications easier and more reliable in every industry.
Up to four individual switching points or windows including the hysteresis can be set. Equipped with two freely programmable switching end stages, an IMC can therefore replace several conventional devices. Adjustable switch-on and switch-off delays help to reliably suppress unwanted switching pulses in harsh environments. The additional on-board functions, such as logic modules, temperature measurement, counters, or time measurement enable complex tasks to be completed with ease directly in the sensor.
Up to four individual switching points or windows including the hysteresis can be set. Equipped with two freely programmable switching end stages, an IMC can therefore replace several conventional devices. Adjustable switch-on and switch-off delays help to reliably suppress unwanted switching pulses in harsh environments. The additional on-board functions, such as logic modules, temperature measurement, counters, or time measurement enable complex tasks to be completed with ease directly in the sensor.
Proximity inductive sensor IME - SICK
The economic standard for use in industrial environments.
SICK´S inductive sensors offer precise detection, less downtime and a long service life. The proximity inductive IME sensors, from SICK, pack high technology into the smallest of spaces. The integrated ASIC chip enables digital adjustment after the end of the manufacturing process.
The saving of values in the ASIC ensures highly precise switching points and very high repeatability of values – for any number of production runs. IM sensors are completely encapsulated with hotmelt molding, which greatly increases shock and vibration resistance. The customer benefits from high positioning accuracy in the machine and long-term reliability.
SICK´S inductive sensors offer precise detection, less downtime and a long service life. The proximity inductive IME sensors, from SICK, pack high technology into the smallest of spaces. The integrated ASIC chip enables digital adjustment after the end of the manufacturing process.
The saving of values in the ASIC ensures highly precise switching points and very high repeatability of values – for any number of production runs. IM sensors are completely encapsulated with hotmelt molding, which greatly increases shock and vibration resistance. The customer benefits from high positioning accuracy in the machine and long-term reliability.
Proximity inductive sensor IMF - SICK
The economic standard for use in the food industry.
The IMF inductive proximity sensor is the new standard for reliability in the food industry. With its extended sensing ranges, made highly precise thanks to the use of SICK ASIC technology, the IMF ensures reliable, stable processes.
What's more, its wide-ranging specification limits allow the proximity inductive sensor IMF, from SICK, to be used in all areas of food production: a huge benefit when it comes to product selection and warehousing. The optical adjustment indicator saves time during commissioning and helps cut down on errors. Communication via IO-Link is also possible, creating more flexibility and adding more functions for automation applications. With an extensive standard product portfolio available, even special devices can be put into action quickly and easily.
The IMF inductive proximity sensor is the new standard for reliability in the food industry. With its extended sensing ranges, made highly precise thanks to the use of SICK ASIC technology, the IMF ensures reliable, stable processes.
What's more, its wide-ranging specification limits allow the proximity inductive sensor IMF, from SICK, to be used in all areas of food production: a huge benefit when it comes to product selection and warehousing. The optical adjustment indicator saves time during commissioning and helps cut down on errors. Communication via IO-Link is also possible, creating more flexibility and adding more functions for automation applications. With an extensive standard product portfolio available, even special devices can be put into action quickly and easily.
Proximity inductive sensor IMP - SICK
The inductive, high-pressure-resistant IMP sensors are perfectly suited for the query of end positions in hydraulic cylinders. The use of state-of-the-art ASIC and manufacturing technologies from SICK sets new standards in installation size, service life and load capability for the sensors.
Due to the stable stainless-steel housing and an active high-performance ceramic surface, they are pressure-resistant up to 500 bars. Above-average system throughput is a matter of course for the range of models M5, M8, M12 and M14 thanks to 1 million tested pressure cycles.
Due to the stable stainless-steel housing and an active high-performance ceramic surface, they are pressure-resistant up to 500 bars. Above-average system throughput is a matter of course for the range of models M5, M8, M12 and M14 thanks to 1 million tested pressure cycles.
Proximity inductive sensor IMR - SICK
The IMR inductive proximity sensors are not the least bothered by magnetic interference fields or weld spatter, such as arise in resistance welding applications. IMR sensors are made without a ferrite core, which makes them magnetic field resistant, and also have a very high electromagnetic compatibility.
Thanks to the rugged non-stick coating made from PTFE, these sensors provide very good protection against flying sparks and slag deposits, thereby guaranteeing a high operational safety. Since IMR sensors operate on the reduction factor 1 principle, they can detect all metals within the same sensing range. The very high sensing ranges of up to 75 mm help reduce mechanical damage to the sensors and therefore sensor failures, and increase plant availability.
Thanks to the rugged non-stick coating made from PTFE, these sensors provide very good protection against flying sparks and slag deposits, thereby guaranteeing a high operational safety. Since IMR sensors operate on the reduction factor 1 principle, they can detect all metals within the same sensing range. The very high sensing ranges of up to 75 mm help reduce mechanical damage to the sensors and therefore sensor failures, and increase plant availability.
Proximity inductive sensor SAM - SICK
The SAM proximity inductive sensor is the simple and intelligent way of speed monitoring with an additional IO-Link interface. SAM can be used as a classic speed monitor or innovative acceleration monitor with a revolutionary speed-independent monitoring function.
The proximity inductive sensor SAM, from SICK, checks if an adjustable speed or acceleration threshold is crossed and provides a switching signal. SAM is setting new standards and revolutionizing commissioning tasks and fields of application thanks to its fast response time, monitored range of up to 12,000 pulses per minute and intelligent start-up delay.
The proximity inductive sensor SAM, from SICK, checks if an adjustable speed or acceleration threshold is crossed and provides a switching signal. SAM is setting new standards and revolutionizing commissioning tasks and fields of application thanks to its fast response time, monitored range of up to 12,000 pulses per minute and intelligent start-up delay.
Push buttons and pilot lights 800F – Rockwell
The time-saving product line: quick selection, superior design, fast installation.
The 800F line is designed and manufactured to demanding performance specifications. Using state-of-the-art solid modeling techniques and finite element analysis, every component built into 800F Push Buttons is optimized for durability and performance.
The 800F line is characterized by modular flexibility for non-illuminated and illuminated devices.
The 800F line is designed and manufactured to demanding performance specifications. Using state-of-the-art solid modeling techniques and finite element analysis, every component built into 800F Push Buttons is optimized for durability and performance.
The 800F line is characterized by modular flexibility for non-illuminated and illuminated devices.
R-Series V linear magnetostrictive positioning sensors - Temposonics
Temposonics® R-Series V sensors are the most advanced linear position sensors on the market, combining the latest magnetostrictive technology with innovative smart diagnostics for industrial applications. Temposonics® R-Series V brings very powerful sensor performance to meet the many demands of your application. The R-Series V is the long term solution for harsh environments that have high levels of shock and vibration.
Rack industrial computer IPC-610-H - Advantech
The IPC-610-H from Advantech is an industrial computer that is made with a chassis that can be installed in a 4U rack.
This is an industrial computer with USB and PS / 2 front access connectors.
It is a modern computer designed for extreme environments with vibration, shock and high temperatures.
The motherboard, memory, drives, expansion cards and operating system can be selected according to the requirement of industrial application or according to the own software requirements to be used.
This is an industrial computer with USB and PS / 2 front access connectors.
It is a modern computer designed for extreme environments with vibration, shock and high temperatures.
The motherboard, memory, drives, expansion cards and operating system can be selected according to the requirement of industrial application or according to the own software requirements to be used.
Racks QE BOX - Rittal
Rittal QE Box - Quick and Easy The QE is a single piece welded construction, designed to support networking infrastructure in either satellite offices or small networks.
Supplied with a fully glazed door, which can be hinged from either side. Cable entry is via the top or bottom, with an optional cable brush. Additional cooling can be supplied via additional fan kits and with a removable side service panel you are also able to access the rear without disturbing the mounted equipment.
Supplied with a fully glazed door, which can be hinged from either side. Cable entry is via the top or bottom, with an optional cable brush. Additional cooling can be supplied via additional fan kits and with a removable side service panel you are also able to access the rear without disturbing the mounted equipment.
Radio frequency modular system RFMS Pro - SICK
Flexible design and high throughput in a single system.
The RFMS Pro (Radio Frequency Modular System) track and trace system is an industrial-grade system from SICK. This system features interrogators for RFID identification, a central controller with integrated assignment algorithm and incremental encoders that determine object position on the conveyor belt. The innovative module design makes it possible to quickly change the mechanical setup for various logistics applications.
The installation wizard integrated in the configuration software from SICK makes simple, cost-effective on-site commissioning possible. The result: complete transparency in the supply chain.
The RFMS Pro (Radio Frequency Modular System) track and trace system is an industrial-grade system from SICK. This system features interrogators for RFID identification, a central controller with integrated assignment algorithm and incremental encoders that determine object position on the conveyor belt. The innovative module design makes it possible to quickly change the mechanical setup for various logistics applications.
The installation wizard integrated in the configuration software from SICK makes simple, cost-effective on-site commissioning possible. The result: complete transparency in the supply chain.
Radius™ BZ1 Area Monitor - Industrial Scientific
When it comes to choosing equipment to protect your worksite from hazardous gases, rely on the Radius™ BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.
The rugged, transportable Radius BZ1 provides an industry-leading run time of 7 days (168 continuous hours) while excelling at hazard communication, connectivity, and ease of use.
When a gas hazard occurs, the Radius BZ1 ensures that workers in industrial environments not only know that the instrument is alarming, but why, thanks to distinctive audio and visual cues and an extra-large display. Custom alarm action messages allow workers to focus on taking appropriate action depending on the present gas level.
The rugged, transportable Radius BZ1 provides an industry-leading run time of 7 days (168 continuous hours) while excelling at hazard communication, connectivity, and ease of use.
When a gas hazard occurs, the Radius BZ1 ensures that workers in industrial environments not only know that the instrument is alarming, but why, thanks to distinctive audio and visual cues and an extra-large display. Custom alarm action messages allow workers to focus on taking appropriate action depending on the present gas level.
Recorder Logoscreen 601 - Jumo
The Logoscreen 601 is Jumo's new highly scalable process recorder, which is characterized by intuitive operation based on icons and process visualization that makes it very easy to use.
Recorder Logoscreen 700 - Jumo
The Logoscreen 700 is the new highly scalable Jumo process recorder.
The Jumo Logoscreen 700 paperless recorder features an intuitive icon-based operation and visualization concept that makes operation easier. Several versions of Jumo Logoscreen 700 are available for process data recording. The high level of scalability allows a flexible adaptation to the various customer requirements: from the logger version without input (120 process values via interface) to different versions of registers with up to 18 universal analogue inputs, 3 analogue outputs, 18 digital inputs, 24 individually selectable digital inputs/outputs and 7 relay outputs. The FDA compliant data recording version meets all requirements in accordance with 21 CFR Part 11.
The Jumo Logoscreen 700 paperless recorder features an intuitive icon-based operation and visualization concept that makes operation easier. Several versions of Jumo Logoscreen 700 are available for process data recording. The high level of scalability allows a flexible adaptation to the various customer requirements: from the logger version without input (120 process values via interface) to different versions of registers with up to 18 universal analogue inputs, 3 analogue outputs, 18 digital inputs, 24 individually selectable digital inputs/outputs and 7 relay outputs. The FDA compliant data recording version meets all requirements in accordance with 21 CFR Part 11.
Redundant positioning sensors GT2 / GT3 – Temposonics
The G-Series Redundant sensor is designed for applications with high safety requirements.
Two or three measuring systems, which work totally independent, are installed inside the compact sensor housing. Each measuring system contains its own canal with sensor element, evaluation electronics, output signal, separated power supply, connector and cable.
All sensor elements are integrated in one pressure proofed high-grade steel rod. Rod and fixing flange feature the approved standard dimensions with 10 mm diameter and M18x 1,5 winding. That qualifies the redundant sensor for measuring linear movements of control valves, linear drives, fluid cylinders and machines.
Two or three measuring systems, which work totally independent, are installed inside the compact sensor housing. Each measuring system contains its own canal with sensor element, evaluation electronics, output signal, separated power supply, connector and cable.
All sensor elements are integrated in one pressure proofed high-grade steel rod. Rod and fixing flange feature the approved standard dimensions with 10 mm diameter and M18x 1,5 winding. That qualifies the redundant sensor for measuring linear movements of control valves, linear drives, fluid cylinders and machines.
Refrigerant leak detector testo 316-3
The testo 316-3 refrigerant leak detector is one piece of kit that you as a refrigerant technician just won’t want to be without. The handheld leak detector can detect all the most common cooling agents and the smallest leaks. Comes with an automatic zero setting that also enables you to locate leaks in contaminated rooms.
Refrigeration analyzer testo 550s
Smart digital manifold with Bluetooth and 2-way valve block.
The testo 550s digital manifold with Bluetooth and a 2-way valve block features a large graphic display, a compact, robust housing, guided measurement menus and the testo Smart App. Top-quality measurement technology, a high degree of reliability and smart functions for quick, easy measurements and documentation make the testo 550s manifold a reliable partner for your commissioning, servicing and maintenance of refrigeration and air conditioning systems and heat pumps.
The testo 550s digital manifold with Bluetooth and a 2-way valve block features a large graphic display, a compact, robust housing, guided measurement menus and the testo Smart App. Top-quality measurement technology, a high degree of reliability and smart functions for quick, easy measurements and documentation make the testo 550s manifold a reliable partner for your commissioning, servicing and maintenance of refrigeration and air conditioning systems and heat pumps.
Refrigeration analyzer testo 557s
Smart digital manifold with Bluetooth and 4-way valve block.
The testo 557s digital manifold with Bluetooth and a 4-way valve block features a large graphic display, a compact, robust housing, guided measurement menus and the testo Smart App. Top-quality measurement technology, a high degree of reliability and smart functions for quick, easy measurements and documentation make the testo 557s manifold a reliable partner for your commissioning, servicing and maintenance of refrigeration and air conditioning systems and heat pumps.
The testo 557s digital manifold with Bluetooth and a 4-way valve block features a large graphic display, a compact, robust housing, guided measurement menus and the testo Smart App. Top-quality measurement technology, a high degree of reliability and smart functions for quick, easy measurements and documentation make the testo 557s manifold a reliable partner for your commissioning, servicing and maintenance of refrigeration and air conditioning systems and heat pumps.
Relay PCI-1761 – Advantech
8-ch relay and 8-ch isolated digital input PCI card.
The PCI-1761 relay actuator and isolated D/I card is an add-on card for the PCI bus.
It provides 8 optically-isolated digital inputs with isolation protection of 3750 VDC for collecting digital inputs in noisy environments and 8 relay actuators for serving as on/off control devices or small power switches.
The PCI-1761’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
The PCI-1761 relay actuator and isolated D/I card is an add-on card for the PCI bus.
It provides 8 optically-isolated digital inputs with isolation protection of 3750 VDC for collecting digital inputs in noisy environments and 8 relay actuators for serving as on/off control devices or small power switches.
The PCI-1761’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
Relay safety ReLy - SICK
The safety relays from the ReLy product family monitor safety functions and safety sensors up to Performance Level e. The ReLy portfolio is clear and concise. Each ReLy module has everything a modern safety relay needs: up to 4 contact paths for the safe switch-off of machines, quick response times for short safety distances, plug-in terminals for short maintenance times, a slim housing for more space in the control cabinet and extensive diagnosis options for quick and easy troubleshooting. The sensor type to be connected alone can determine which product is the right choice.
Reliable capacitive proximity sensors enclosed in a rectangular housing CQ - SICK
Capacitive proximity sensors can detect all types of material: powder-based, granulated, liquid, and solid – even through plastic walls.
SICK’s capacitive proximity sensors also feature high electromagnetic compatibility (EMC), which prevents incorrect switching.
CQ sensors, from SICK, feature rectangular housings that are suitable for all manner of installation conditions.
SICK’s capacitive proximity sensors also feature high electromagnetic compatibility (EMC), which prevents incorrect switching.
CQ sensors, from SICK, feature rectangular housings that are suitable for all manner of installation conditions.
Reliable pipe location UT9000 - Sewerin
Easy – always – efficient
When it comes to operating and maintaining pipe and cable networks, the documentation about their location is sometimes incomplete. And it is not just in the urban environment where pipes run under streets, squares and pavements, but also under undeveloped land. Precise knowledge about the position of each pipe reduces the level of maintenance required and reliably avoids probing or excavation at the wrong site. The products available from SEWERIN (Germany) for locating pipe work offer comprehensive solutions for different situations.
When it comes to operating and maintaining pipe and cable networks, the documentation about their location is sometimes incomplete. And it is not just in the urban environment where pipes run under streets, squares and pavements, but also under undeveloped land. Precise knowledge about the position of each pipe reduces the level of maintenance required and reliably avoids probing or excavation at the wrong site. The products available from SEWERIN (Germany) for locating pipe work offer comprehensive solutions for different situations.
Remote Access - Configure machines and PLCs remotely - Netbiter® - HMS
With a Netbiter communication gateway connected to your PLC or machine, you can do programming or debugging from any location.
Just like being on site!
Netbiter Remote Access Mode allows you to open up a secure connection to remote machinery and configure or operate it from any location. You use your standard software applications such as TIA Portal for Siemens applications or RSLogix for Rockwell applications.
The effects?
Fewer maintenance visits, better control and improved service to your customers.
Just like being on site!
Netbiter Remote Access Mode allows you to open up a secure connection to remote machinery and configure or operate it from any location. You use your standard software applications such as TIA Portal for Siemens applications or RSLogix for Rockwell applications.
The effects?
Fewer maintenance visits, better control and improved service to your customers.
Remote communication gateway Ewon Netbiter® EC360 – HMS
The Netbiter EC360 from Ewon by HMS is a rugged industrial communication gateway designed for remote monitoring, access, and control of field equipment from anywhere. Connected via 4G cellular or Ethernet to the Netbiter Argos IIoT cloud platform, the device enables 24/7 remote management, secure data transmission, and full access to equipment status, configuration, and diagnostics.
Remote data center EC310 Netbiter® - HMS
Netbiter EasyConnect EC310.
The Netbiter EC310 communication gateway connects to field equipment via several connection methods: Serial RS-232/485, Modbus RTU, Modbus-TCP or EtherNet/IP.
The gateway sends data to the cloud-based Netbiter Argos data center via Ethernet communication.
On-board I/O ports on the EC310 gateway provides the option to connect sensors and additional equipment to the system.
The Netbiter EC310 communication gateway connects to field equipment via several connection methods: Serial RS-232/485, Modbus RTU, Modbus-TCP or EtherNet/IP.
The gateway sends data to the cloud-based Netbiter Argos data center via Ethernet communication.
On-board I/O ports on the EC310 gateway provides the option to connect sensors and additional equipment to the system.
Remote I/O Cube 20S – Murrelektronik
Murrelektronik's decentralized Cube 20S field bus system expands its field-tested Cube family with another product series that is highly useful – in the same compact form that's highly flexible which is typical for Cube modules.
The space saving modules are only 12.9 millimeters wide and feature a modular design. This ensures quick and easy connections – thanks to the integrated backplane with power supply.
Bus nodes for Cube 20S are available with all standard fieldbus protocols.
The space saving modules are only 12.9 millimeters wide and feature a modular design. This ensures quick and easy connections – thanks to the integrated backplane with power supply.
Bus nodes for Cube 20S are available with all standard fieldbus protocols.
Remote module for QE Adam 4571 - Advantech
Configure your modules with a Windows utility.
Enjoy the benefits of remote control and accessibility data for RS-232/422/485 devices.
The Adam 4571 from Advantech is a module that works as a data gateway between Serial and Ethernet interfaces. Data transmission is ensured up to 921.6kbps and the configuration of the modules can be done very simply with a Windows utility.
Enjoy the benefits of remote control and accessibility data for RS-232/422/485 devices.
The Adam 4571 from Advantech is a module that works as a data gateway between Serial and Ethernet interfaces. Data transmission is ensured up to 921.6kbps and the configuration of the modules can be done very simply with a Windows utility.
RF Identification Systems RFID RFU61x - SICK
Complete transparency with the RFU family.
Continuous and company-wide identification with a single technology is now possible for the first time. The RFU61x achieves complete transparency in production and logistics processes – from component assembly to the shipment of the end product. The foundation for this is UHF RFID technology: IIoT applications with scanning ranges of 0 to 10 m, bulk reading and resistance to interfering factors such as light, dirt and dust. A direct line of sight to the data card is also not required.
Continuous and company-wide identification with a single technology is now possible for the first time. The RFU61x achieves complete transparency in production and logistics processes – from component assembly to the shipment of the end product. The foundation for this is UHF RFID technology: IIoT applications with scanning ranges of 0 to 10 m, bulk reading and resistance to interfering factors such as light, dirt and dust. A direct line of sight to the data card is also not required.
RF Identification Systems RFID RFU62x - SICK
Increasingly, global networks are replacing closed added-value chains. The goal here is to achieve best possible efficiency over the entire production and distribution path by means of gap-free data transparency. This is possible using RFID technology (Radio Frequency Identification), which is today defining the trends in contemporary factory and logistics automation. This is how it works: a memory chip that is identified per radio frequency is
attached to an object. The data on the chip can be output and re-written as required.
The RFU62x is a UHF RFID read/write device suitable for scanning ranges of up to 1 m. Transponder communication is compliant with the ISO/IEC 18000-6C (EPC Class 1 Gen 2) standard. The device can be configured to operate from the SOPAS user interface or by sending ASCII commands directly. The well-defined, characteristic read/write range
is particularly well-suited for automatic identification over small object distances, e.g., in conveyor technique.
attached to an object. The data on the chip can be output and re-written as required.
The RFU62x is a UHF RFID read/write device suitable for scanning ranges of up to 1 m. Transponder communication is compliant with the ISO/IEC 18000-6C (EPC Class 1 Gen 2) standard. The device can be configured to operate from the SOPAS user interface or by sending ASCII commands directly. The well-defined, characteristic read/write range
is particularly well-suited for automatic identification over small object distances, e.g., in conveyor technique.
RF identification systems RFU63x - SICK
The RFU63x is an ultra-high frequency (UHF) RFID solution for industrial environments.
Via integrated application management software, the RFU63x is able to solve common industrial applications without any external “middleware” and can, therefore, be used as a standalone solution. This is possible due to an integrated filter and data management system. With IDpro compatibility,
the RFU63x is easy and cost-efficient to integrate in common industrial environments.
Different options for parameter cloning between systems (e.g., integrated MicroSD card feature) reduce maintenance time. The integrated feedback LED can be used to read diagnostic or process feedback.
Via integrated application management software, the RFU63x is able to solve common industrial applications without any external “middleware” and can, therefore, be used as a standalone solution. This is possible due to an integrated filter and data management system. With IDpro compatibility,
the RFU63x is easy and cost-efficient to integrate in common industrial environments.
Different options for parameter cloning between systems (e.g., integrated MicroSD card feature) reduce maintenance time. The integrated feedback LED can be used to read diagnostic or process feedback.
RFID identification systems RFH6xx – SICK
Radio-based RFID technologies in the HF (High Frequency) and UHF (Ultra High Frequency) ranges supplement SICK’s industrial automation portfolio.
In applications where process-relevant data is modified remotely, RFID makes it possible to store data on writable and rewritable media. And, in contrast to optical solutions, RFID provides reliable identification of all objects - despite dirt and everyday wear.
In applications where process-relevant data is modified remotely, RFID makes it possible to store data on writable and rewritable media. And, in contrast to optical solutions, RFID provides reliable identification of all objects - despite dirt and everyday wear.
Robot horizontal type Scara – Mitsubishi Electric
The Mitsubishi RH-F series features the latest 4-axis SCARA robots, perfect for a wide range of industrial applications.
High speed and high precision are only achieved with a highly rigid arm and the latest servo control technology. RH-F Robots are prepared for a wide range of production facilities in the food and pharmaceutical industry as well as the most demanding high-speed operations for high-precision assembly applications.
High speed and high precision are only achieved with a highly rigid arm and the latest servo control technology. RH-F Robots are prepared for a wide range of production facilities in the food and pharmaceutical industry as well as the most demanding high-speed operations for high-precision assembly applications.
Robot RV-8CRL - Mitsubishi Electric
In order to complement its range, Mitsubishi has been working in recent years on the development of Compact robots.
With this new family it’s possible to offer a more compact solution in their size, but also more economical than the standard series. Creating their derivation from the CR series, last year 2 new models were launched in the Scara version (RH) and this year, with the launch of the RV-8CRL model, the RV version is included, maintaining all the quality standards we know.
With this new family it’s possible to offer a more compact solution in their size, but also more economical than the standard series. Creating their derivation from the CR series, last year 2 new models were launched in the Scara version (RH) and this year, with the launch of the RV-8CRL model, the RV version is included, maintaining all the quality standards we know.
Rotating light and sound beacon RT-A/C/D/E – PATLITE
This rotating beacon with an integrated audible buzzer delivers a powerful 105 dB output, providing a wide frequency range for clear alerts across both low and high tones. With 32 selectable tones and an adjustable volume control, it is ideally suited for noisy industrial environments and outdoor applications, thanks to its weather-resistant housing. The unit supports binary and bit input control, is compatible with NPN open collector systems, and features a convenient test playback switch to simplify installation and setup.
Rotating vane level monitor NIR-9 - Kobold
The NIR-9 level monitor is suitable for wide applications for bulks and solids in silos and hoppers. Regardless of humidity and conductivity of the product, the maximum or minimum level is controlled reliably.
A motor drives a rotating vane that is extended into the tank by means of a shaft. As soon as the bulk reaches the rotating vane, it’s rotation is blocked. Hereby, a microswitch is actuated, wich gives out an alarm signal and a second microswitch turns off the motor. If the filling level decreases, the rotating vane is released again and the force of a spring pulls the motor back to its original position.
A motor drives a rotating vane that is extended into the tank by means of a shaft. As soon as the bulk reaches the rotating vane, it’s rotation is blocked. Hereby, a microswitch is actuated, wich gives out an alarm signal and a second microswitch turns off the motor. If the filling level decreases, the rotating vane is released again and the force of a spring pulls the motor back to its original position.
Round RS PRO Connect R30 - STEINEL
Stylish. Progressive. Practical. The round STEINEL RS PRO Connect R30 is also available as a slave version without sensor for straightforward interconnection via Bluetooth. For evenly distributed light whenever needed – and optimum illumination for hallways, corridors and stairwells. With an output of 24.5W provides 3120/3200lm of light at 3000/4000K. Dimensions of ø420x55mm.
RS PRO 5100 SC with motion detector & Bluetooth - STEINEL
This new watertight armor is designed to be simple to use and of superior quality. It stands out for ease of installation and maintenance, high energy efficiency, and excellent functionality.
The watertight housing the world has been waiting for!
The watertight housing the world has been waiting for!
RST® MINI device connector Mola® for gesis® system - Wieland Electric
Installations with high protective rating can be implemented with more flexibility and tailored to any application better than ever thanks to the new modular MOLA® connectors for the
RST® MINI series.
RST® MINI series.
RTD – F.Fonseca Temperature Sensors
Thermoresistances, also known as RTD (Resistance Temperature Detectors), are temperature sensors made of high temperature coefficient electrical resistance metals.
RTD temperature sensors are typically identified by the material of which they are constituted and by the resistance they present at 0°C. The most commonly used nominal values are Pt100, Pt500 and Pt1000. The various rated values, output characteristic dependent on temperature and tolerances are specified in DIN EN 60751.
RTD temperature sensors are typically identified by the material of which they are constituted and by the resistance they present at 0°C. The most commonly used nominal values are Pt100, Pt500 and Pt1000. The various rated values, output characteristic dependent on temperature and tolerances are specified in DIN EN 60751.
RV-12CRL robot - Mitsubishi Electric
The Mitsubishi Electric RV-12CRL is a new, versatile industrial robot in the MELFA RV-CR series. It is a 6-axis vertical articulated robot with a 12kg payload. A key feature is its long reach of 1504 mm, the longest in its compact robot family. It boasts built-in signal wiring and air piping for clean integration. With improved J6 wrist speed and strength, it is ideal for tasks like machine tending and screwing.
It is compatible with the CR800 controller, enhancing functionality without extra cost. Advantages include greater handling capacity, increased flexibility, simplified integration, and enhanced efficiency. Its applications span pick and place, palletizing, material handling, machine tending, and screwing. The robot's design includes a beltless drive (excluding J5) for better reliability and easier maintenance, and a battery-less motor, reducing upkeep. Its protrusionless structure minimizes possible interferences.
It is compatible with the CR800 controller, enhancing functionality without extra cost. Advantages include greater handling capacity, increased flexibility, simplified integration, and enhanced efficiency. Its applications span pick and place, palletizing, material handling, machine tending, and screwing. The robot's design includes a beltless drive (excluding J5) for better reliability and easier maintenance, and a battery-less motor, reducing upkeep. Its protrusionless structure minimizes possible interferences.
Safe Entry Exit security solution - Sick
Muting is now even easier.
When it comes to the protection of machines and systems in the field of pallet conveyor technology, reliable and efficient differentiation between humans and materials is indispensable for maintaining productivity. Classic systems which detect these muting functions often need a large amount of mounting space and are very vulnerable to sensor displacement due to the protruding brackets for muting sensors.
Safe Entry Exit from Sick is the TÜV-certified alternative to these safety solutions.
When it comes to the protection of machines and systems in the field of pallet conveyor technology, reliable and efficient differentiation between humans and materials is indispensable for maintaining productivity. Classic systems which detect these muting functions often need a large amount of mounting space and are very vulnerable to sensor displacement due to the protruding brackets for muting sensors.
Safe Entry Exit from Sick is the TÜV-certified alternative to these safety solutions.
Safe multibeam scanners scanGrid2 – SICK
With scanGrid2, SICK is offering an economical safety solution for small, line-guided AGCs (automated guided carts): The world’s first LiDAR multibeam scanner with safe solid state technology.
Thanks to its excellent price-performance ratio, large fleets of AGCs can not only offer efficient protection up to performance level c, but can also be made more productive. scanGrid2 enables the elimination of mechanical barriers as well as higher driving speeds and heavier loads on the AGCs.
Thanks to its excellent price-performance ratio, large fleets of AGCs can not only offer efficient protection up to performance level c, but can also be made more productive. scanGrid2 enables the elimination of mechanical barriers as well as higher driving speeds and heavier loads on the AGCs.
Safe radar system safeRS/safeRS3 - SICK
The safeRS and safeRS3 safe radar systems are electro-sensitive 3D protective devices for safe personal detection with very high machine productivity. They protect applications in accordance with PL d or SIL 2 in line with ISO 13849-1 and IEC 62061.
Safety Command Devices - SICK
Safety command devices from SICK ensure that dangerous movements are reliably stopped or critical machine functions are reliably initiated. SICK'S portfolio of safety command devices includes four major product groups: emergency stop pushbuttons, reset pushbuttons, rope pull switches and enabling switches. The wide product range enables users to choose different functions based on their application needs.
Safety controller -FX3-MOC0 - SICK
Safety controller drive monitor for Flexi Soft FX3-MOC0 - SICK.
SICK'S safety controllers provide a simple, flexible, and scalable solution to realize an intelligent machine design. Flexi safety controllers feature a modular hardware platform without the use of complex software. They are simple to operate and can be easily integrated with all safety control components. Their compact design makes these safety controllers ideal for a variety of applications.
Providing protection from hazardous movement in addition to creating more efficient and flexible machine designs: SICK´S Drive Monitor FX3-MOC is the ideal expansion module for the Flexi Soft safety controller for use in drive monitoring. Monitoring can be performed using functions such as speed and direction monitoring and the execution of stop functions in accordance with IEC 61800-5-2. All commonly used encoder interfaces are supported. The Drive Monitor FX3-MOC has programmable logic with special drive modules. It can be integrated via all common fieldbuses into a higher-level controller in combination with the Flexi Soft safety controller. It is possible to import pre-defined applications, thus greatly simplifying the engineering of standard safety applications. Integration into the Flexi Soft safety controller provides important solutions for tool machine, robotic, and mobile applications.
SICK'S safety controllers provide a simple, flexible, and scalable solution to realize an intelligent machine design. Flexi safety controllers feature a modular hardware platform without the use of complex software. They are simple to operate and can be easily integrated with all safety control components. Their compact design makes these safety controllers ideal for a variety of applications.
Providing protection from hazardous movement in addition to creating more efficient and flexible machine designs: SICK´S Drive Monitor FX3-MOC is the ideal expansion module for the Flexi Soft safety controller for use in drive monitoring. Monitoring can be performed using functions such as speed and direction monitoring and the execution of stop functions in accordance with IEC 61800-5-2. All commonly used encoder interfaces are supported. The Drive Monitor FX3-MOC has programmable logic with special drive modules. It can be integrated via all common fieldbuses into a higher-level controller in combination with the Flexi Soft safety controller. It is possible to import pre-defined applications, thus greatly simplifying the engineering of standard safety applications. Integration into the Flexi Soft safety controller provides important solutions for tool machine, robotic, and mobile applications.
Safety controller Flexi Classic – SICK
SICK'S safety controllers provide a simple, flexible, and scalable solution to realize an intelligent machine design. Flexi safety controllers feature a modular hardware platform without the use of complex software. They are simple to operate and can be easily integrated with all safety control components. Their compact design makes these safety controllers ideal for a variety of applications.
The Flexi Classic modular safety controller allows easy logic setting without any software. This enables the user to adapt the configuration to the application requirements. Logic functions are configured using rotary DIP switches. These switches are located directly on the modules, enabling quick and easy commissioning.
The Flexi Classic modular safety controller allows easy logic setting without any software. This enables the user to adapt the configuration to the application requirements. Logic functions are configured using rotary DIP switches. These switches are located directly on the modules, enabling quick and easy commissioning.
Safety controller Flexi Compact - SICK
Safety under control – compact, easy and efficient.
Safety controller Flexi Mobile - SICK
The Flexi Mobile safety controller is the answer to safety requirements for dynamic mobile robots. With the rugged aluminum housing and a smart installation concept, you can integrate Flexi Mobile into AGVs and AMRs in a space-saving manner. An additional control cabinet is no longer required. Certified function blocks ensure high cost-effectiveness right from the engineering stage of the mobile robots. Configuration, commissioning, and diagnostics are quick and easy using the intuitive Safety Designer software. The safety functions of Flexi Mobile, which have been specially developed for mobile robots, enable high productivity in automation processes – both indoors and outdoors.
Safety controller Flexi Net - SICK
Flexi Net from SICK is a powerful safety controller for modern machine architectures. The scalable control architecture enables the addition of up to 12 Flexi I/O modules and the creation of a secure machine network along the production line. With up to 512 TÜV-certified function blocks and a minimum logic cycle time of 4 ms, Flexi Net offers high performance up to performance level e (PL e, EN ISO 13849-1). Sensors can be integrated into the safety controller in a variety of ways – thanks to EFI-pro and Flexi Loop. Safe Motion via integrated HTL inputs and application-specific function blocks meets the requirements of mobile robots. Live diagnostics, together with central configuration via the Safety Designer, ensure fast commissioning and easy maintenance.
Sale general conditions Garantias, reparações e devoluçõesPolítica de CookiesPrivacy PolicyReporting channel
F.Fonseca © All rights reserved.
- 0
- 1